Notice on Strengthening Safety Production Management

The project departments and branches affiliated to the company:

In order to carefully learn lessons from accidents on other projects, do a good job in construction safety management under severe weather, and prevent various quality and safety incidents In order to ensure the safety and normal production and life of workers in the event of an accident, the relevant matters are urgently notified as follows:

1. Earnestly implement various safety work in various environments

Various projects Departments and branches must take the project manager as the first responsible person, take effective measures, and promptly carry out various safety production tasks. Fulfill production safety responsibilities, ensure production safety measures are in place, and ensure that personal safety is foolproof. Emergency rescue plans must be formulated for sudden safety accidents that may occur anytime and anywhere during bad weather, emphasizing the principles of rapid response and effective disposal, minimizing losses and ensuring the personal safety of construction workers.

2. Strengthen construction site safety management and take various preventive measures

All project departments and branches must conscientiously implement various production safety management systems and effectively conduct on-site safety management ：

1. Strengthen the safety monitoring and maintenance of aerial work equipment, lifting equipment, temporary electrical equipment, large

temporary facilities, cross-operation edge protection measures, supports, etc. protection. Timely clean up the water around the foundation of large lifting machinery and equipment to ensure that the foundation is stable and improve the mechanical equipment's resistance to thunderstorms, lightning strikes and collapse prevention.

2. In particular, it is necessary to strengthen the monitoring of deep foundation pits. Construction workers are not allowed to live around deep foundation pits. At the same time, attention should be paid to monitoring the impact of deep foundation pit excavation on surrounding buildings, and drainage and During the reinforcement process, technicians must observe at any time and keep observation records.

3. When encountering thunderstorms, outdoor operations should be reduced as much as possible, and high-altitude operations are prohibited. If work cannot be temporarily suspended due to special reasons, safety education for workers must be further strengthened and effective labor protection supplies must be provided. , to ensure the safety of workers. Arrange personnel to remove accumulated water in the construction site in a timely manner to reduce losses caused by thunderstorms and prevent various safety accidents.

4. It is necessary to strengthen the education and inspection of safe use of electricity for construction workers, and it is strictly forbidden to pull or connect wires indoors. Equipped with sufficient and effective fire-fighting equipment to strictly prevent fires, electric shocks and other safety accidents.

5. Strengthen construction site inspections on each project to ensure on-site construction safety.

3. Implement the construction site duty system to ensure smooth flow of information

Each project must strictly implement the construction site duty system and clarify the personnel on duty every day. Keep abreast of the safety production dynamics of this project, take decisive measures when problems are discovered, organize forces to deal with them promptly and properly, and do a good job in response and disposal. We must be fully prepared and respond quickly to minimize the losses from emergencies and accidents. At the same time, report to the company in a timely manner in accordance with regulations.

4. Strengthen the safety management of on-site workers

1. Earnestly implement the job responsibility system, adhere to principles, and resolutely resist illegal instructions.

2. Operators of special types of work must actively cooperate with other types of work, do not work in violation of regulations

or violate labor disciplines, and have the right to refuse illegal orders to ensure safe production.

3. Workers in special types of work must be given safety technical briefings before taking up their posts. Without safety technical briefings, they are not allowed to work. All safety measures must be strictly implemented during work.

4. Operators of special types of work must obey the unified command of the on-site commander and are not allowed to make unauthorized claims or violate construction procedures. Accidents must be reported promptly, and when hidden dangers are discovered, personnel must be organized to rectify them immediately without delay.

5. Establish personnel files for special types of work. Organize safety knowledge education and skills training for personnel in special types of work, continuously improve safety technical operation levels, and improve the ability to prevent accidents and occupational hazards.

6. Special operations personnel should correctly use and keep various safety protection equipment and labor protection supplies, be good at adopting opinions that are beneficial to safe operations, and be able to promptly provide advice to those who violate regulations.

Notice is hereby given.

Engineering Department of XXX Co., Ltd. July 30, 2013

Subject heading: Notice on Strengthening Safety Management Engineering Management Department of Gansu Baolu Engineering Construction Co., Ltd. July 2017 Issued on the 30th

Notice on Strengthening Safety Production Management [Part 2]

Resident Supervision Offices and Project Management Departments:

The Provincial Highway Bureau Inspection Team is here During the inspection, it was found that some construction sites had problems such as insufficient safety production management and weakened safety awareness. In this regard, the current safety production management issues are required as follows.

1. Strengthen safety awareness and resolutely overcome lax and paralytic thinking. All units must comply with the "Safety Production Law" and the relevant requirements of the headquarters on production safety management, so as not to relax in safety education, daily inspections, and hidden danger inspections. They must tighten the string of safety production at all times and resolutely overcome any laxity. Numb the mind.

2. It is necessary to clarify job responsibilities and comprehensively investigate and eliminate hidden dangers of accidents. All supervision offices should further strengthen the safety supervision responsibilities of resident supervision and put safety production supervision at the top of all work. Each project leader and safety officer must firmly establish the concept of "safety first" and effectively strengthen production safety management. Safety officers must perform their duties conscientiously, stay on-site, promptly discover and resolutely stop illegal operations.

3. Effective measures must be formulated and rectification requirements must be conscientiously implemented. Do the following work in accordance with the rectification requirements of the provincial bureau inspection team:

1. Safety production placards or banners must be installed at the mixing station, safety operating procedures signs must be in the operation room, and sandbags or sandbags must be used on both sides of the hopper. Railings and fences, acetylene and oxygen cylinder storage must meet safety requirements, switch boxes must be managed by dedicated personnel, and staff must wear safety hats and necessary labor protection.

2. On one side of the surface construction support formwork and bridge decking construction, directional signs that meet the standards must be set up. Protective sheds must be set up for generators, and belt protective covers such as air pumps must be strictly inspected. It is necessary to continuously strengthen the self-protection education of mechanical equipment, seam cutting, health care and formwork support personnel to avoid accidental injuries.

3. Safety plans or measures must be formulated for the dismantling of grass-roots mixing plants and gantry cranes, and the relocation of mechanical equipment. The deputy manager and safety officer in charge of safety must provide on-site command. Unskilled workers are strictly prohibited from working at high altitudes, and protective measures must be strengthened for high-altitude operations. .

4. Lightning protection devices must be installed in oil storage tanks, tower facilities and other higher facilities in open areas. Pay attention to abnormal weather forecasts, protect yourself from thunderstorms, and prevent disasters. Migrant workers' tents in low-lying areas that may be flooded must be quickly relocated to safe areas.

5. Strengthen food hygiene management, conduct food inspections to prevent mold, plague, and poisoning. Mushrooms and other mountain products collected or purchased must be eaten with caution.

August 6, 2012