Work schedule of factory safety production

Safety in production is a long-term basic national policy of the country, a basic guarantee for protecting the safety and health of workers and state property, promoting the development of social productive forces, and also a basic condition for ensuring the development of socialist economy and further implementing reform and opening up. Next, I will bring you the work plan for safe production in the factory. I hope you like it!

Work schedule of factory safety production 1

The second half of 2008 is the half year for our company to carry out standardization, improve management and further develop. The company will adopt "safety first, prevention first;" Comprehensive management, environment-friendly; Continuous improvement, healthy and harmonious "safety production policy, strengthen basic safety management, and do a solid job in safety. The specific work plan is as follows:

First, make the company's safety work target for the second half of the year 20_

1. Death and serious injury (including traffic liability) accidents are zero.

2. Major fire (explosion) accidents are zero.

3. Major equipment accidents are zero.

4. Major accidents are zero.

5. Major pollution accidents are zero.

6. The acute poisoning accident is zero.

7. The employee safety education and training rate is 100%.

8. Certificate rate of special operations 100%.

9. The rectification rate of potential accidents is 99%.

10. The compliance rate of workplace hazards is 98%.

Second, continue to do a good job in the basic management of safety.

The company will sign the responsibility book of safety production target step by step. According to the National Assessment and Scoring Method for Safety Standardization of Hazardous Chemicals Business Units, relevant safety management systems are revised, employee behaviors are standardized, and various measures are taken to make employees' daily work and behaviors conform to the requirements of the system and safety standardization, and strive to be a national third-class safety standardization unit to ensure the health and safety of the company's employees.

The third is to strengthen the monitoring of major hazard sources.

According to the Identification Standard for Major Hazard Sources of Hazardous Chemicals (gb 182 18-2009) and the requirements of the superior departments such as the Municipal Administration of Work Safety, strengthen the key monitoring of major hazard sources of the company to prevent accidents.

Revise the company's emergency rescue plan for major accidents, urge all departments to improve their own plans, and conduct drills to predict, warn and plan the occurrence of safety accidents, so that the company can effectively prevent, resolve and respond to accidents.

Fourth, do a good job in site management to ensure safety in production.

At present, although the company's equipment runs smoothly, the particularity of the production environment and the instability of production equipment in the chemical industry will directly bring adverse effects to the production equipment. Therefore, this year, we should continue to strengthen on-site safety management and intensify operation supervision, especially to do the following work:

(1) All departments should strengthen safety inspection, find hidden dangers and make timely rectification.

(2) For special operations such as hot work, ground breaking and heights, the work permit shall be strictly handled, and unlicensed operations are strictly prohibited.

(3) Strengthen the daily maintenance and regular inspection of equipment.

(4) Do a good job in safety management during festivals and seasons.

(5) Do a good job in daily work safety monitoring.

Five, do a good job in safety inspection and hidden dangers rectification

(1) The company shall organize a comprehensive safety inspection at least once a month.

(2) Continue to strengthen safety supervision during maintenance, especially strict management of "nine votes", and put an end to illegal command and operation on site.

(3) Pay special attention to professional and seasonal safety inspection and inspection before, during and after the festival.

(4) Full-time and part-time safety officers should continue to implement the daily safety inspection system.

(5) Focus on implementing the hidden danger reporting system.

Six, do a good job in safety education, improve the safety technical quality and self-protection ability of employees.

(1) Earnestly do a good job in the three-level safety education for new employees and outsiders.

(2) Insist on daily education and safety education for all employees.

(1) In the second half of 20 _ year, the company shall conduct safety technical training for all employees at least once.

(2) Carefully train the transferred personnel and suspended personnel according to the company's training and education system. Those who fail the training are strictly prohibited from taking up their posts.

(3) Focus on the safety management of foreign personnel involved in engineering construction and equipment maintenance.

(III) In order to do a good job in team safety management, combined with the activities of meeting the standards of safety teams, this year, we will focus on the safety business training of company team leaders in two phases.

(four) irregular safety management business training for full-time and part-time safety management personnel.

(five) to organize various forms of safety education activities.

(1) In conjunction with the "Safe Production Month" held nationwide in June, the company will hold a safety knowledge training course for middle managers. At the same time, we will carry out various forms of safety education activities according to the requirements of superiors and the actual situation of the company.

(2) In June, 165438+ 10, the company's emergency rescue plan drill was held.

(six) to do a good job in the training and management of special types of workers.

Seven, strengthen the work of industrial hygiene, to ensure the health of workers.

According to the requirements of superiors, the company should adhere to the policy of "safety first, prevention first" in its production and business activities in the second half of 20_. Comprehensive management, environment-friendly; Continuous improvement, health and harmony "policy, vigorously prevent, control and eliminate occupational hazards. Supervise the relevant departments to establish the company's industrial hygiene responsibility system, formulate and standardize the occupational hygiene management system and operating procedures, establish occupational hygiene files and employee health monitoring files, and monitor the company's on-site noise, chemical poisons and other hazards, effectively protect the company's employees' health and promote the company's economic development.

Factory safety production work schedule 2

In order to promote enterprises to establish and improve safety production rules and regulations, improve the technical knowledge and management level of the broad masses of cadres and workers in the company, enhance the safety production quality of the broad masses of workers, and effectively prevent the occurrence of serious accidents, the work plan for the second half of 20_ is formulated as follows:

I. Work objectives

1, put an end to death and serious injury accidents;

2, put an end to fire accidents;

3, put an end to explosion accidents;

4. Put an end to traffic accidents;

5, put an end to food poisoning and major infectious disease accidents;

6. The general safety accident rate such as minor injuries shall not exceed 2 ‰;

7. The rectification rate of potential safety hazards100%;

Second, the specific measures

Safety work focuses on prevention. If we want to nip the signs of accidents in the bud, we must always be vigilant and sound the alarm bell.

1, strengthen publicity, and let the safety awareness penetrate into the hearts of cadres and workers.

1) Organize and lead employees to carry out corresponding safety knowledge training, be familiar with and master the necessary safety technical knowledge and self-protection knowledge, and take up their posts only after passing the examination, and make records of employee safety training.

2) For those who leave, transfer or return to work, the unit shall train them in safety skills and post operation methods, and they can only take up their posts after passing the examination, and establish corresponding safety training files.

3) Actively cooperate with relevant functional departments to conduct professional safety technical training for special operations personnel in accordance with national regulations, and conduct regular review to ensure that they hold relevant certificates.

4) Make employees master the emergency treatment measures for small-scale industrial injuries and control the injuries to a minimum.

5) Enable employees to skillfully use labor health protection articles, reduce occupational hazards and prevent the occurrence of occupational diseases.

6) Enable employees to correctly and skillfully take self-help and mutual rescue measures in case of emergency.

7) Through various forms (warning signs, billboards, slogans, etc. ), so that employees can clearly understand the hazard factors and preventive measures existing in their posts, as well as rescue measures when hazards occur.

2, seriously study and implement the laws and regulations of production safety, improve the responsibility system for production safety.

1) Implement the laws, regulations, policies and systems of the state and government departments at all levels on safety in production, timely implement the spirit of safety discussion at the grass-roots level, and convey it to every employee, so as to enhance the awareness of safety in production and the legal concept of the employees of the company.

2) Improve and implement the responsibility system for production safety, formulate the work objectives for production safety according to the principle of "whoever is in charge is responsible", and the responsible person shall sign the "Responsibility Letter for Production Safety Objectives" step by step, and the responsible person shall enhance the awareness of production safety and strengthen the management of production safety; To carry out the idea of "everyone is responsible for safety in production", employees should conscientiously fulfill their respective responsibilities for safety in production and implement the responsibility system for safety in production for all employees.

3) Hold regular safety production meetings, summarize safety production work, formulate rectification and preventive measures for potential safety hazards, exchange safety work experience, convey safety production documents, arrange relevant safety work, and report safety inspection.

3. Pay close attention to safety production management, strictly implement various safety rules and regulations and safety operation procedures, ensure safe and civilized operation, conduct safety self-inspection on a regular basis, and implement responsibilities and measures for hidden dangers rectification.

1) Establish and improve the operating equipment account, special equipment account and safety facilities account, and conduct regular maintenance and testing to ensure that relevant licenses are complete.

2) Post warning signs or bulletin boards in inflammable, explosive, toxic and harmful places and posts that may cause occupational hazards.

3) Fireworks and firecrackers should be stored reasonably, and eye-catching grading storage signs should be set to prevent fire and chemical accidents.

4) Vehicles and protective facilities shall be maintained in time, and maintenance records shall be kept.

5) All kinds of fire safety facilities are well equipped, qualified and effective, and operators are required to wear labor protection articles.

4, in accordance with the provisions, do a good job of safety pre-assessment and approval of each work, formulate safety precautions and emergency rescue plans, and increase the number of drills, improve the actual requirements of the plan, customize various warning signs, and ensure the smooth progress of each work.

5, "May 1", "Eleventh", "Spring Festival" and other major festivals to carry out safety inspections, strengthen safety on duty, to ensure holiday safety.

6, implement the system of duty and succession. Strengthen the leadership and management of public security patrol work, adjust and enrich the patrol personnel on duty, do a good job in safety education of patrol personnel on duty, strictly record the patrol and handover procedures on duty, and prevent them from leaving their posts. The leaders on duty at night should increase the number of inspections to prevent major accidents.

The third chapter of the factory safety production work plan

First, establish the guiding ideology and define the management objectives.

1, leading safety work with scientific safety development concept.

Adhere to the policy of "safety first, prevention first and comprehensive treatment", adhere to the principles of "people-oriented" and "who is in charge and who is responsible", conscientiously implement the national laws, regulations and mandatory standards on safety production, standardize and strengthen the supervision and management assessment of safety production, continuously improve its own management level, and firmly establish the management concept of "life, health and environmental protection" for the company's stable development.

The principle of work in the second half of 2000 is: "strengthen leadership, improve the system, clarify responsibilities, highlight key points and strengthen supervision".

2. Security objectives

There were no major fires, work-related injuries, equipment and communication accidents, and no events affecting the stability of society and the group during the safety production year.

B. Serious injury rate per thousand people: ≤ 0. 1.5 ‰

C. Injury rate per thousand people: ≤2‰

D, strive for civilized and standardized safety production sites at all levels.

Second, improve the management system and the security system.

1, improve the responsibility system for production safety. Implementing the safety responsibilities of leaders, departments and employees at all levels in the process of management and production is an important means to institutionalize, standardize and scientific safety work, and is the basis for doing a good job in safety production.

2. Improve the safety education and training system. The new situation puts forward new requirements for enterprise safety education. It is necessary to adjust the safety education and training system to make it more institutionalized and standardized, so as to improve the safety awareness and safety production management level of all personnel, which is also the need of the long-term development of enterprises.

3. Improve the reward and punishment measures for production safety. The purpose of formulating reasonable reward and punishment measures is to better implement the responsibility system for production safety, encourage the advanced and spur the backward.

4. Improve the management measures for employee casualty accidents. In order to further standardize the company's production safety accident reporting system and handling methods.

5, enrich and strengthen the safety production leading group members, under the leadership of the general manager to carry out various safety management work, equipped with full-time security officers responsible for daily safety supervision and inspection management, safety key departments should designate part-time personnel to be responsible for safety work.

Third, strengthen study and publicity to raise awareness in an all-round way.

1. Leaders at all levels should further study and implement national laws, regulations and mandatory standards related to production safety, such as the Law of People's Republic of China (PRC) on Production Safety and the Regulations on the Administration of Production Safety; Raise awareness and act in accordance with the law at work.

2. Employees in each position should learn the national laws, regulations and mandatory standards on safety production, understand and master the relevant provisions, and clarify their own safety responsibilities.

3. Employees in all positions should understand the rules and regulations and operating procedures of safety production, improve safety awareness, and complete the qualitative change from "I want safety" to "I want safety" and finally to "I will be safe".

4. Carry out "ankang cup" safety competition and "Safety Production Publicity Month" activities, improve the safety awareness of leaders and employees through activities such as policy preaching, photo exhibition and safety knowledge education, and strive to create an atmosphere of "everyone cares about safety and everyone cares about life".

Fourth, do a good job in education and training to improve the quality of employees.

1, according to the relevant provisions of the state, clarify the safety responsibilities of various functional departments, formulate training plans, and organize their implementation in time.

2. Organize employees in all positions to learn the provisions on _ _ _ in the national laws, regulations and mandatory standards on production safety, such as the Law of People's Republic of China (PRC) on Work Safety and the Regulations on the Administration of Work Safety, and clarify their responsibilities.

3. The key contents of the safety work of each department this year are: perfecting the safety management system, implementing the safety responsibility, and strengthening the safety knowledge training of employees.

4. Strictly implement the first paragraph of Article 38 of the Regulations on the Administration of Work Safety: operators shall receive education and training on work safety before entering new posts or new job sites. Without education and training or education and training examination unqualified personnel shall not work at their posts.

Five, strengthen supervision and management, reduce accidents.

1. Establish and improve the safety production management organization and implement the safety production responsibility system. Making rewards and punishments measures for safety production is the basis of supervision and management; Equipped with high-quality full-time safety management personnel, it is the requirement of the country, and it is also an important guarantee to strengthen supervision and management and implement various safety production rules and regulations.

2. The company's safety supervision and management focuses on equipment and personal accidents, fire prevention, theft prevention, traffic accidents and other projects in the production process, and the supervision focuses on equipment and personal safety.

3. The special production and materials departments of all departments should strengthen the supervision and inspection of self-managed projects to prevent the occurrence of safety accidents, and all departments should report the monthly safety report on time every month.

The fourth chapter of the factory safety production work plan

In order to implement the policy of "safety first, prevention first and comprehensive treatment", the management of production safety by objectives is strengthened. Combined with the actual situation of the factory, the work plan for safety production in the second half of 20_ year is specially formulated, and the work of safety production is put on the important agenda, and the alarm bell is always ringing and unremitting.

First, the annual target.

No death, no serious injury, no major production equipment accidents and no major accident hidden dangers were realized throughout the year. The incidence rate of industrial accidents is lower than the index stipulated by the factory, and the qualified rate of comprehensive dust concentration is over 80% (see the table below).

Second, the guiding ideology

It should be guided by the company's responsibility book for safe production target management in the second half of the year, based on the factory safety management system and based on the general policy of "safety first, prevention first". Based on the safety management of workshops and teams, focusing on the prevention of major accidents in key units and key posts, and taking the correction of post illegal command, illegal operation and employees' labor protection and wear as the breakthrough point, we will implement various rules and regulations, create a new situation in safety work, and achieve a fundamental improvement in safety production.

Third, firmly establish the idea of "safety first"

All units and departments should attach great importance to safety in production, take safety in production as an important task, conscientiously implement the policy of "safety first, prevention first", further enhance the awareness of safety in production, make practical moves and make practical moves, truly implement the policy of "safety first", and solve the problem of leaders' understanding first by further improving the responsibility system for safety in production. Really put safety in production on the important agenda and put it in the first place. Only by attaching importance to safety ideologically can the sense of responsibility be put in place, management and grasp in place, the safety responsibility can be thoroughly implemented, the hidden dangers of accidents can be rectified, and the principles of "who is in charge and who is responsible" and "safety must be managed in production management" can be strictly implemented to ensure safety in production.

Four, in-depth development of special rectification work of production safety.

According to the current situation of the factory, determine the key units and parts of safety production in the second half of the year, improve the emergency plan for accident handling, strengthen the monitoring and rectification of major hidden dangers, earnestly carry out monthly safety inspections and special safety inspections at the factory level, and the workshop will be inspected once a week, and the team will insist on three safety inspections in the class. The production department and the workshop leaders and management personnel are required to strengthen daily safety inspections and organize rectification in time according to the principle of "three decisions and four no pushes". If it cannot be rectified temporarily, safety precautions should be taken, especially for important parts such as gas stoves, boilers, sulfuric acid tanks and liquid ammonia tanks, special rectification work should be done to strengthen the management of flammable, explosive, toxic and hazardous chemicals. It is necessary to strengthen special rectification and strengthen posts in strict accordance with the Safety Production Law and the Regulations on the Safety Management of Hazardous Chemicals.

Verb (abbreviation of verb) continues to strengthen safety education, training and publicity for employees.

The factory takes the form of running classes, meeting before and after classes, wall newspaper and briefing. Conduct safety education for employees, improve their safety knowledge and operation skills, organize employees to learn relevant safety laws, decrees and safety knowledge regularly or irregularly, do a good job in three-level safety education for new employees and employees who have changed jobs, improve their safety awareness and self-protection ability, and prevent accidents. Special operations personnel should undergo professional training, pass the examination, and issue certificates to achieve 65433.

Earnestly implement the Law on Work Safety, and carefully study articles such as Typical Accident Cases and Minutes of Emergency Meeting on Work Safety in _ _ _ Factory (No._ _ Tisheng [20 _]9) issued by the company.

Constantly standardize and strengthen the propaganda work of safety production, carry out the "ankang cup" competition in depth, make full use of the national safety production month in June, and carry out safety production education by posting safety production slogans, issuing safety publicity columns, setting an example and other forms. And increase publicity to achieve the goal of promotion year by year.

Improve employees' awareness of obeying laws and regulations, and enhance their awareness of safety and self-protection; Guide workshops and teams to establish the concept of safety culture, strengthen management and implement responsibilities; Closely combine safety production with ensuring the stability, harmony and development of the factory, so that the alarm bell of safety production will ring.

In the second half of the year, the work of safety in production will continue to adhere to the principle of "safety first, prevention first", further distinguish responsibilities according to the principle of "who is in charge, who is responsible", proceed from the overall situation of maintaining the development of the factory, maintain the hard-working work style of titanium dioxide workers, strictly implement the company's deployment of safety in production, control indicators, take active actions, do a good job in safety in production, and make new contributions to the economic development of the factory.

The fifth chapter of the factory safety production work plan

In order to conscientiously implement the Law of People's Republic of China (PRC) on Safety in Production, strengthen the awareness of safety in production, implement safety responsibilities, achieve the goal of safety in production, and create a safe and stable production environment, the work plan for safety in production in the second half of this century is formulated:

First, the overall requirements.

According to the arrangement of the safety work meeting of the group company, as well as the safety objectives and production requirements, we adhere to the people-oriented, comprehensive, coordinated and sustainable development concept, adhere to the policy of "safety first, prevention first", firmly establish the concept of "safety responsibility is more important than Mount Tai", strengthen the leadership of safety production, carry out comprehensive safety inspection, continue to deepen the special rectification of safety production, strengthen basic work, and strive to achieve further stability and improvement of the safety situation in the service area.

Second, the main goal.

First, the service area will improve production safety, with zero fire accidents, zero heavy casualties, zero compensation accidents for industrial injuries above 500, and industrial injuries below 500 1%.

Second, the public security situation in key departments should be significantly improved. Accidents with losses exceeding 1 10,000 are. The food poisoning rate is zero, and the commodity expiration rate is zero.

The third is to further establish and improve the safety production supervision and management system and working mechanism, and make new progress in the construction of safety work.

Third, specific arrangements.

1 and July: Work out the work plan for safe production.

Adjust the safety production leading group, improve the functions of all members, carry out safety inspection and duty work, and do a good job in safety inspection during the Spring Festival holiday.

2. August: Hold the work service area of the Safety Committee to define the objectives and tasks.

Clarify the responsibilities of safety production supervisors and safety production administrators, and improve emergency plans in the field of safety services. Do a good job in fire prevention, theft prevention and other safety inspections during the May Day holiday, carry out the "Safe Production Month" activities in depth, and formulate specific implementation work plans.

3.9: Strengthen food safety management.

Focus on strengthening the inspection and rectification of food safety and fire safety in surrounding hotels and supermarkets, and carry out the work of preventing safety accidents.

April10—65438+February: Conduct fire prevention survey.

In the "National Day, Mid-Autumn Festival" during the work of production safety and stability, to carry out a comprehensive inspection of production safety in the fourth quarter.

Articles related to the work schedule of factory safety production:

★ 20_ Annual Work Arrangement for Safety in Production

★ Annual work arrangement for safety production

★ 202 1 Work Schedule for Safety in Production

★ Five model articles on factory safety management work plan

★ Enterprise 20_ Work Plan for Safe Production

★ Work plan for safe production in 2020

★ Work plan for enterprise safety production in 2020

★ 5 latest model articles on enterprise safety production work plan

★ Work plan for enterprise safety production in 2020

★ 6 model articles on work plan for safety production.