How to set broadband speed limit

Question 1: How to set the broadband speed limit? Before setting the broadband speed limit of the router, we need to know how much broadband we have opened and how many computers share it together. Here, take our broadband as 2M, two people use it at the same time, and automatically obtain the IP address as an example to set the broadband speed limit of the router. First, set to automatically obtain the IP address. First, set the main parameters of the router. As shown in the figure: DHCP server: enabled.

Address pool starting address:192.168.1.2.

Address pool ending address:192.168.1.3.

Gateway: 192. 168. 1 and then set up the computer. As shown in the figure: Right-click Network Neighborhood-Properties-LAN Connection-Properties-Double-click cp/ip Protocol-> Automatically get ip address 2. Restrict broadband settings.

1. Set IP broadband control

Before starting IP broadband control, check: ADSL line, total uplink bandwidth: 1024, total downlink bandwidth: 2048 (where 2M is 2 * 1024 and 4m is 4* 1024), and it is best to click "Save". As shown in figure: 2. Set the IP broadband control rule list.

I want to limit the broadband of two computers here, so I need to set two rules when setting up. If there is a broadband speed limit in front of your router, I need to delete all the original settings (just click Delete All Entries). As shown in the figure: Add a new entry-> IP bandwidth control rule configuration (modify the following parameters and use the default parameters for the rest). As shown in the figure: tick before activation, fill in the address field:192.168.10.2.192.10.2, and uplink: 5/kloc.

Downlink: max. 1024 (this is the value that limits the bandwidth, and 1024 is 2048/2, or it can be set a little higher). Finally, after setting all the parameters, click "Save".

Then add a second tone rule and add a new entry->; IP bandwidth control rule configuration

Enabled (checked), address field192.168.1.3-1.3, uplink: maximum 5 12, downlink: maximum/.

Finally, in order to prevent others from modifying the IP address, we can add another rule and fill in the address field:192.168.1.4-192.168.1.4.

These are the steps of broadband speed limit for routers.

Question 2: How to set the router speed limit for 4M broadband;

1. Enter the router: open the browser-enter 192. 168. 1 (this is the general router address) and enter the user name and password (the default is generally admin).

2. Enter the correct user name and password to enter the router management background.

3. We need to check the existing IP and corresponding MAC address bar first. Click DHCP Server on the left, select Client List, and write down the corresponding IP and MAC addresses displayed on the right. This must be remembered correctly.

4. Click the "Static Address Assignment" link on the left, and then click the "Add New Project" button on the right.

5. Enter the correct corresponding MAC and IP addresses on the right, then select "Status" as "Effective" and click "Save" to save. This step is to ensure that the network speed and traffic control will always be correct.

6. Repeat the first two steps until all IPS are added.

7. Click the "IP Bandwidth Control" link on the left, select the "Turn on IP Bandwidth Control" check box on the right, and select the correct network speed below.

8. Fill in the IP and bandwidth to be controlled in the following rules. At the same time, set your computer to "guarantee minimum bandwidth" and select "enable" all.

9. Click the "Save" button to save all settings.

Question 3: How does the router set up broadband to control the uplink and downlink, and how to limit the network speed of others? Hello, my 20 megabit fiber:

The method is as follows

1. Log in to your router first.

2. Turn on the QOS setting switch, and configure the total upstream and downstream broadband of the router to 100000Kbp respectively.

3. Then set QOS rules: "Add new entry", input IP segment and port, and select independent broadband as mode.

Question 4: How does tp router set the broadband speed limit? 20 megabits broadband, landlord! It is very simple for a router to set a speed limit.

Log in to the router -IP payment control-check the IP broadband control first-and then click Save first.

This time depends on how big your broadband is. Set the uplink total broadband and downlink total broadband. You are 20M=20480KB.

Uplink broadband = send data (understand? Just like mobile QQ, the traffic you send messages to others)

Uplink can be set to 20480, but it can't exceed 20480 (if you set 1KB, I guarantee that you can't even send QQ information).

Downlink broadband = download data (understand? Just like the traffic you need to download software games and watch TV movies online)

Downlink settings are up to you. You can also set 20480.

The maximum network speed is set for both uplink and downlink, which is convenient for you to use the network.

Let's start setting the speed limit.

See IP-IP address range, upstream broadband (maximum and minimum) and downstream broadband (maximum and minimum).

Explain! You should know to limit each other's IP address. You can do this by first setting the router without a password. Let others connect to your router. At this point, you enter the router and click on the list of HCP servers and clients. At this time, you will see that someone else is connected to your router IP address (for example,-192.168.100192.168.6438+).

Then return to the IP broadband control example (192.168.1.100192.168.103.

Click to add a new entry -ip address range (starting address192.168.1.100 to ending range192.168.199).

This will control the IP network speed within the range of 100- 199, and then you can set the maximum and minimum uplink broadband below-you can set 1M to 2M for them, and their setting methods are as follows.

Uplink minimum (1024) and maximum (2048)

Downlink Minimum (1024) Maximum (2048) Click Save to be OK. - .

When you return, click Configure to enable the hook there.

Note-If there are other IP addresses that are not within the range of 100- 199, it is not limited by your speed.

You can also set IP one by one.

Question 5: How to set the speed limit for 20M broadband? How to set the peak time of10.5 for personal use? First, open the router management page (use IE:192.168.1to open the default IP address). After entering the router management page, find an IP broadband control option in the left menu and click Open. Then check the first item to turn on IP bandwidth control (the IP bandwidth control function will not take effect until you check this item and click the "Save" button), set the IP segment, set the up and down network speeds, save and restart the router.

Question 6: How does broadband limit the upload speed? You can limit the upload speed in the router settings.

Take TP-L HUNK wireless router as an example, and log in the control system of TP-LINK wireless router. Type 192. 168. 1 in the address bar with a browser, and the login entry will appear. Usually the user name is admin, and the password is admin by default before modification.

This is the control interface of the TP-LINK wireless router after logging in, and all the control options are on the left.

Select the IP bandwidth control option, and then select the control settings.

If IP control is not enabled, the speed limit set in this interface applies to all hosts. Line selection is based on ASDL or other networks.

The uplink bandwidth is the upload speed and the downlink bandwidth is the download speed. The unit is K.

1M= 1024K。 At present, the maximum download speed of broadband used by families in China is one eighth of the bandwidth. That is, the actual maximum download speed of 4M broadband is 4X 1024/8=5 12K/S, and the maximum upload speed is 56K in most cases, so it is meaningless to set beyond this value. Save after setting is completed.

If you want to limit the network speed according to personal IP, use control rules to achieve it. On the left, select IP Bandwidth Control, and then select Control Rules.

In the control rules interface, select Add: Select Enable, fill in the initial IP address that requires speed limit, and fill in the maximum allowable bandwidth speed, including uploading and downloading. Please refer to Step 4 for specific numerical considerations. Fill it out and save it.

After the final setting is successful, the display interface is as shown in the figure. Among them, you can check whether the free control is enabled or not and whether the IP-targeted speed limit function is used.

Question: How does 20m broadband limit the speed of others? I hope the following methods can help you.

You can set a fixed bandwidth or distribute the bandwidth evenly. You can look at the following cases:

1. Set the bandwidth range of the computer.

For example, my broadband network cable bandwidth is 3M, and I have two computers, so I want to specify the speed of my computer as 2M:

Manually configure the IP address of my computer as192.168.0.106. The configuration method is as follows:

Operation method of Windows XP system:

First, click the Start-Control Panel in the lower left corner of the computer, and then double-click the network connection to find the local connection.

Then right-click Local Area Connection and click Properties.

Finally, double-click Internet Protocol (TCP/IP) and select Use the following IP address. The IP is as follows:192.168.0.106, subnet mask: 255.255.0, and default gateway: 65438+. Then click OK.

Windows7 system operation method:

First, click the icon in the lower left corner of the computer desktop, and then click Control Panel-Network and Internet-Network and * * * Enjoy Center-to change the adapter settings.

Then right-click Local Area Connection and click Properties.

Finally, double-click Internet Protocol Version 4(TCP/IPv4) and select Use the following IP address. The IP is as follows:192.168.0.106, subnet mask: 255.255.0, default gateway: 65438.

Then click OK.

After setting the IP address of the computer, you can log in to the router management interface192.168.0.1,click Advanced Settings-Bandwidth Control and click Enable.

Fill in the IP address range:192.168.0.106 ~106, and upload speed is 20-30kbytes.

Then enable it and click Add to List.

The download speed is 64~256KByte. Note: the maximum download speed is the network speed obtained by the computer.

Then enable it and click Add to List.

2. Allocate broadband settings evenly:

For example, my broadband network cable, with a bandwidth of 4M, has two computers. I want to divide it equally and give each computer a bandwidth of 2M:

Fill in the following details:

Ip range:192.168.0.2 ~192.168.0.254,

The upload speed can be filled in at 30 ~ 64KByte,

Enable and then add to the list;

Ip range:192.168.0.2 ~192.168.0.254,

Download can be filled in as 64~256KByte, note: the maximum download speed is: the network speed obtained by the computer.

Enable it and add it to the list!

Note: Comparison table of common home bandwidth download rates (1M= 128KByte/s)

Thank you for your support of our products, and welcome to pay attention to Tengda's official micro signal Tenda 1999. I wish you a smooth work and a happy life!

Question 8: How to set the speed limit standard for12m optical fiber broadband? If you apply for 12M fiber-optic broadband from the operator, please do not limit the bandwidth on the setting interface or the limit value is much larger than the actual application bandwidth. Because the operator will limit your account, you can safely set the uplink and downlink bandwidth to 102400Kbps, which is1000 mm.

Question 9: How to set the network speed limit There are two ways to set the network speed limit: the first way is through software; At present, many users are running p2p (free); The bad thing is; Using this software, if the computer in the local area network opens the firewall; Poisoned Apr attacks will be reported;

The second method is to limit the network speed through the router; In this way, you can accurately control the network speed; You need to see if your wireless router supports the speed limit function; If the router can be controlled by ip bandwidth; Support you to choose a router! The following is the wireless router of tp for your reference!

Tp wireless router, you enter the wireless router control interface; Find ip bandwidth control: turn on ip bandwidth control;

Fill in the size of your home broadband: change the minimum broadband to the maximum broadband; Tick √ after each item; Save it.

Question 10: How to speed up or slow down your computer network! I really didn't know that.