Gionee forgot how to unlock the password.

Question 1: What if Jin Li forgets to set the password? Hello, Android phone can be unlocked in engineering mode if you forget your password. The specific method is: turn off the phone, and at the same time press the power-on button+volume up button (some mobile phones have volume down button) until the phone is turned on. The following options will appear:

Restart the system immediately: restart the system.

Erase data/restore factory settings: erase data/set factory mode.

The volume key is the cursor selection key, which can be used to move the cursor, and the power key is the confirmation key.

Select Erase Data/Restore Factory Settings, confirm, and then select Yes to confirm.

Phone numbers, text messages, and non-self-contained applications will be cleared.

Then return to choose to restart the system immediately and confirm until the phone is turned on normally. (Wait a few minutes), the problem is solved!

Question 2: Li Jing forgot how to unlock his mobile phone password. Press and hold the volume increase button+power on button to enter the recovery mode in the power-off state. If there are only four items, select the third and fourth items to brush the machine.

Question 3: How to unlock the digital password of Gionee mobile phone? When the phone is turned off, press the power-on key and the volume increase key (some phones use the volume decrease key) until the phone is turned on. The following options will appear: Restart the system immediately: Erase data/Restore factory settings: Erase data/Set factory mode, where the volume key is the cursor selection key, which can be used to move the cursor, and the power key is the confirmation key. Select Erase Data/Restore Factory Settings, confirm, and then select Yes to confirm. Phone numbers, text messages and applications that you didn't attach will be cleaned up. Then go back to the previous level, choose to restart the system immediately for confirmation, and wait for a few minutes until the phone is turned on normally.

Question 4: What should I do if I forget to unlock the pattern password of Gionee mobile phone? Methods/steps

1 We can also break the screen lock mode by clearing user data. First, turn off the phone, at the same time, take out the battery of the phone, wait for 5 seconds, and then install it. Press and hold "Volume+"and "Power" simultaneously. The phone will automatically enter recovery mode.

2 In recovery mode, use "Volume+"and "Volume-"to move the cursor to the item "Erase data/restore factory settings", and then press "Power button" to confirm.

3 In the subsequently opened interface for confirming and clearing user data, use Volume+and Volume-to move the cursor to "Yes, delete all user data" and press "Power button" to confirm.

4 After clearing the user data, the program will return to the main interface, use "Volume+"and "Volume-"again to move the cursor to "Restart the system immediately" and press the "Power" key to confirm.

5 At this time, the phone will automatically restart. After the restart is completed, you will find that the unlock password of the mobile phone has been removed and the mobile phone enters the desktop normally.

Question 5: How does Jin Li forget the password to unlock 1 and turn off the phone? Press the power on button and the volume up button (some phones press the volume down button) until the phone is turned on. The following options will appear: Restart the system immediately: Restart the system to erase data/restore factory settings: Clear data/set factory mode, where the volume key is the cursor selection key, which can be used to move the cursor, and the power key is the confirmation key.

2. Select Erase Data/Restore Factory Settings, confirm, and then select Yes to confirm.

3, phone numbers, text messages, non-self-contained applications will be cleaned up. Then go back to the previous level, choose to restart the system immediately for confirmation, and wait for a few minutes until the phone is turned on normally.

Question 6: Jin Li forgot how to unlock the mobile phone password. How to unlock the screen? Solution:

1. When the mobile phone is turned off, press and hold the volume+and power button for several seconds at the same time until the boot screen appears on the mobile phone;

2. After the phone is turned on, it will enter the "recovery mode" interface, use the volume button to operate "Move Up and Down" and use the power button to operate "Select and Confirm"; Select "Simplified Chinese" and press the power button to confirm;

3. Enter the main menu of "Recovery Mode", press "Volume Decrease" to move the cursor to "Clear Data", and then press the power button to confirm;

4. Enter the "Clear Data" submenu; Press the "Volume Down" key to move the cursor to "Clear all data", and then press the power button to confirm;

5. After confirming "Clear Data", the system will ask again whether to "Confirm Clear All Data" and prompt the user "This operation cannot be resumed, and the system will return to the initialization state!" ; At this point, the user presses the "volume key" to move the cursor to the "confirm" button, and then presses the "power key" to confirm, so that all data can be cleared and the factory settings of the mobile phone can be restored.

Question 7: How to unlock Gionee W909 after forgetting the power-on password? Method 1: Enter the mobile phone recovery mode, clear the data and restore the factory settings. This method will restore the mobile phone to the factory state, and the personal data, materials, address book and applications on the mobile phone will be lost. If there is important information on the SD card, please take it out of the phone before operation.

Press the volume increase button and the power button at the same time when the phone is turned off, and release the button after the red exclamation mark and Android robot are displayed on the phone;

2. Release the button after the screen lights up;

3. Use volume+ and volume- keys to set the light bar to "Erase data/restore factory settings", that is, "Erase data and restore factory settings", and press the power button to confirm;

4. Adjust the light bar to "Yes, delete all user data" with the volume+ and volume- keys, and press the power button to confirm;

5. Wait for a while until the next screen appears, select "Restart the system immediately" to restart the phone, and press the power button to confirm;

6. Wait for the phone to restart and enter the system, and do not directly enter the password to enter the system. Try it quickly!

Method two.

1. Download the Brush Wizard on your computer.

2. Connect the mobile phone to the computer through the data cable. Please note that your u *** debugging mode should be turned on. If it doesn't open and you can't get into the system, please use one of the following methods. Then open the Brush Wizard. If you haven't installed the mobile phone driver, you can download and install the driver yourself. It should be noted that if the driver installation is unsuccessful (at least mine failed), I suggest downloading a pea pods, because I personally think that the driver in pea pods is more comprehensive.

Once the driver is installed, it will be connected to the mobile phone.

4. The mobile phone is connected. Look for the utility in the driver wizard and the password to clear the screen lock in the utility.

Question 8: What should I do if I forget the lock screen password of Gionee's mobile phone? If you forget the phone's screen lock password, you can unlock it in the following ways; First, if your mobile phone is turned on for u *** debugging, then you can connect to the computer and use the brush master to unlock the password of your mobile phone. Second, if your mobile phone is not turned on for u *** debugging, then you can double clear your mobile phone. The specific methods are as follows; When the phone is turned off, press the key combination to enter the double clear recovery mode. The key combination is nothing more than the combination of the volume key and the power key. For example, the volume up button plus the power button, the volume down button plus the power button, or press all three buttons at the same time. Select wipe data/factory reset wipepartition and wipedata/factory reset after entering recovery mode. Third, it can be solved by brushing the machine. Matters needing attention in double settlement. First, after the mobile phone is cleared, it will clear the locked data in the mobile phone, which is irreversible. Such as address books and software. Second, many mobile phones enter recovery in different ways. Try a few more times. If you can't see the options I said, it proves that your model is wrong.

Question 9: There are two ways to unlock the lock screen password of Gionee mobile phone:

1. Forgot the password of the third-party software to lock the screen: The software didn't start at that time because it didn't start very quickly when it started. We can use this to solve the problem that the mobile phone forgets the screen lock password, manually turn it off and restart it, and uninstall the third-party frequency lock software on the mobile phone shortly after it is turned on. After unloading, the mobile phone will return to normal.

2. Forgot the password of the screen lock software: Turn off the phone, and at the same time press and hold the volume up key (or down key) of the phone to make the phone enter the brush mode, and then click to clear the phone cache, so that the phone can be used normally when it is turned on again.