Joke Collection Website - Blessing messages - What type of text is better on the LED electronic screen of a men's clothing store?

What type of text is better on the LED electronic screen of a men's clothing store?

You can try both Song font and Hei font, just choose the one you like and looks good. In fact, each LED display is equipped with a control card and software. After the screen is installed, connect the control card and power supply. Connect it, and then copy the software to your computer. You can operate it directly on your computer, and you can modify the text content, scanning method, and scrolling effect. Usually, it is operated through a mobile phone, U disk, or computer to change and set the font and content of the LED display: If your LED display uses a GSM SMS control card, then you need to change the fonts and content. The tool is your mobile phone, and you can send and change advertising subtitles by editing text messages. If you are using a U disk control card, then to change the program, just use the U disk to copy the content and take it to the LED display to replace it. If you want to change the content on the LED display through a computer, you have the option. Need to be combined with actual needs. For example, some stores use it for personal storefronts. It is recommended to use a wired control card to send it through a computer, or choose to use a U disk control card without connecting. If you want to change the advertising content, just use the U disk to copy it. If your LED advertising displays are distributed in various communities, or at bus stops, chain store door screens and other places, and you want to send them collectively, which is trouble-free and fast, it is recommended to use a GPRS wireless control card and edit the content in computer software. One-click group messaging. Under normal circumstances, it is recommended to use USB or GPRS, which is fast and saves time. It is also worth noting that the following hardware or software problems will also affect the font settings of the LED advertising display: 1. The computer and the LED display are not connected. If the connection fails, it depends on whether the serial port number is correct. It must be correct before the transmission can be successful. (If you use a USB data cable, you need to find the serial number in the device manager. If there is no USB, just change the serial number to 1) 2. When you click the send icon, it displays "Cannot find control card" or "Control card" "Unable to connect" or "Control card settings do not exist", etc. This involves the settings of the control card. Generally speaking, it is difficult to fix. Please contact technical support. 3. Sometimes the display screen is used for too long, and the data line has problems with virtual soldering and short circuit, which will affect the use of the display screen. 4. When modifying the content, the LED display must be powered on. I believe everyone knows this.