Why is my webpage blank when it opens?

1, DNS server problem

If you can access IP, it is a DNS problem, which may be an error in obtaining DNS when networking, or it may be a problem of the DNS server itself.

The solution is: control panel-network and dial-up connection-local connection-right-click properties-TCP/IP protocol-properties-use the following DNS server address. Different ISPs have different DNS addresses. Sometimes it's the router or the network card. If you can't connect to the ISP's DNS service, you can restart the router or reset it.

2, IE browser itself.

When the IE browser itself fails, or IE is maliciously modified and destroyed, it will lead to the inability to browse the webpage. You can try to repair with IE in safe mode, or reinstall IE.

3, the problem of network firewall

Sometimes improper network firewall settings, such as accidentally putting IE on the blocked access list and incorrect firewall policies, will affect browsing. At this time, check the policy, reduce the security level of the firewall or close it directly to see if it is back to normal. ?

Web page function:

1, high production speed and low cost.

2. Once the template is determined, it is not easy to modify, and updating is time-consuming and laborious.

3. It is often used to make some fixed boards.

4, usually used for text and picture composition, often used for content introduction of sub-pages.

5. The requirements for server performance are not high, but the pressure on storage is relatively high.