Safety knowledge: won't the gas stove catch fire? Fire warning, don't call again and again.

Can't the gas stove catch fire? Fire warning, don't call again and again:

1, repeat ignition

The gas ejected by repeated ignition will accumulate in the air, and when it reaches a certain concentration, it will easily deflagrate once it encounters an electric spark.

2, lighter ignition

After repeated ignition, unburned gas has accumulated to a certain concentration. At this time, it is forbidden to use matches, lighters and other open flames to check the gas appliance or continue to ignite it, which may easily ignite the gas trapped in the air and cause danger.

3. Replace the gas stove yourself

There may be many reasons for not catching fire. Because some parts of the gas stove need to be replaced or repaired by professionals, it is not recommended for users to replace them themselves, so as to avoid dangerous accidents caused by unprofessional operation. "Don't try to ignite again when the ignition is unsuccessful for many times in a short period of time. You should quickly open the doors and windows to ventilate, and then try to ignite after the gas is exhausted. " Therefore, when your gas stove is not on fire, don't operate it yourself!

We have compiled an ignition strategy for you, so that you can learn it quickly!

1, check whether there is air.

Sometimes you may forget to buy gas when you are too busy at work, or maybe the gas pipeline near your home is repaired and the gas has stopped. In these two cases, it is often possible to catch fire for the first time, but the flame soon becomes smaller and goes out. Because the gas at this time is only the residual gas in the pipeline.

2. Check whether the battery is charged.

Listen carefully to its sound, observe the spark when striking the fire, whether the sound is low and weak, and whether the discharge frequency is obviously slower than before. If there is no electricity, replace the battery in time.

3, do a good job of cleaning

If the gas stove is left for too long, the ignition needle will be easily stained by oil. After the gas stove cools, wipe off the grease of the ignition needle with a dry soft towel, and then try to ignite it. It may also be that there is something wrong with the pressure reducing valve nozzle of the gas stove or the nozzle of the gas stove, and the oil pollution causes the gas injection to be blocked and the flame is not strong. You can pass it through with a thin wire.

4. Check the air inlet.

Insufficient air intake or improper throttle adjustment may cause yellow fire and red fire. Check the throttle under the gas stove, adjust the throttle appropriately, and see if there is anything blocked.

5, check whether the cooker is beyond the service life.

According to the "Safety Regulations for Household Gas Appliances", the normal service life of the cooker is 8 years from the date of sale, and there are huge safety hazards in the gas cooker that has been in service for an extended period. For the sake of safety, please contact the professionals of the gas company in time to replace it for you.

Similarly, if you still can't ignite normally after trying the above methods, please contact us as soon as possible and let professionals handle it at home. Don't operate by yourself at will! Don't panic when there is a leak, remember a few tricks to help you.