What should I do if my phone is in headphone mode?

1. The phone is in headphone mode without headphones plugged in

If the phone has no headphones plugged in and the phone has this prompt, it is recommended: 1). Turn off the phone and restart it.

2). Eliminate software factors: back up mobile phone data (phone book, text messages, multimedia files, etc.) and restore factory settings. 3). The switch reed inside the headphone jack is dirty, rusty or loses its elasticity, causing the headphone detection switch to fail to turn off normally. The mobile phone system will misjudge that the headphone is still plugged in, so the headphone mode is displayed.

You can try unplugging and plugging in the headphones a few more times. You can also twist a tissue paper into a small stick shape and gently screw it into the jack in the direction of the twist to bring out the dust and see if it can return to normal. If it still fails to return to normal, the headphone socket needs to be replaced.

Extended information: 1. Headphone mode is a mode that the mobile phone intelligently switches after inserting headphones. 2. All the audio output of the mobile phone will be input to the headset, and the sound will be produced by the headset, which is the function of headset mode.

3. Pattern refers to the standard style of things. Modes can be switched to change the status of things.

Reference: Baidu Encyclopedia - Headphones.

2. How to switch the phone to headphone mode

If it is still in headphone mode after unplugging the headset, do the following:

1. Headphone jack metal piece Move around, use a pen tip to poke the headphone jack, and the metal piece inside will pop back.

2. You can dip a cotton swab in alcohol and rotate it to wipe the headphone plug and mobile phone jack (the plug or jack may be oxidized), and then try inserting it again.

3. Turn off the phone and restart it. If it still doesn't work, back up the files and restore the phone to factory settings.

4. If it still doesn’t work, that is, the circuit inside the speaker is damaged due to a collision or fall, it is recommended to send it for repair.

5. Roll the facial tissue into a roll, stuff it into the headphone jack (make sure it is full), stuff it in hard and then quickly ***.

3. The phone always displays the headphone mode, but no headphones are plugged in. What’s going on?

It may be caused by a short circuit in the headphone jack of your phone due to moisture, or it may be caused by foreign matter. If the contact in the headphone jack is not in good contact, you can use cotton swabs or paper towels to clean it; if it still cannot be solved, it is recommended to check and repair it at an after-sales service point.

The following is a detailed introduction: 1. Generally, this is caused by moisture in the mobile phone or water entering the headphone jack. Try to shake the water out of the earpiece, then use a cotton swab to gently twist it in to absorb the water, and then use a hair dryer. Turn on the hot air at low setting to slowly dry out the remaining moisture, and then restart the phone; 2. It may also be due to poor contact in the headphone jack of the phone, which may be caused by foreign matter inside. Use cotton swabs or paper towels to clean it; 3 . If the problem still cannot be solved after cleaning, it may be caused by a malfunction in the headphone jack. It is recommended to take the phone to an after-sales service center for inspection and repair.

4. How to change the headphone mode when the phone appears

Method 1. If the headphones are inserted into the headphone jack of the phone, unplug the headphones to cancel the headphone mode.

Method 2: Restart the phone first. After the restart, when the main interface appears, press and hold the return touch key, as shown in the box in the figure, to exit the mode.

Method three: If the headphone mode is still prompted, you can restore the factory settings.

1. Enter the main interface of the phone, and then enter "Settings" (shown in the box in the picture).

2. When we come to the phone’s settings interface, we select “Advanced Settings” (shown in the box in the picture).

3. When we come to the advanced settings interface of the phone, we select "Backup and Reset" (shown in the box in the picture).

4. When we come to the advanced settings interface of the phone, we select "Backup and Reset" (shown in the box in the picture).

5. When we come to the phone’s factory reset interface, we select “Reset Phone” (shown in the box in the picture).

6. When we come to the phone reset interface, we enter our lock screen password and click "Next".

7. Finally, we select "Reset Phone" again, and the phone will enter the reset stage.

Method 4. If it still doesn’t work, it may be that the internal parts of the phone are faulty. It is recommended to go to the phone for repair.

5. The mobile phone has automatically turned into headphone mode, how to switch it back

Taking the Huawei Honor 8 mobile phone as an example, the modification method is as follows:

1. Open For mobile phones, find the "Settings" icon on the mobile phone desktop and click to enter.

2. After entering the settings, find the "Intelligent Assistance" item in the drop-down menu and click to enter.

3. After entering the smart assistance, find the "Smart Wire Control" item and click to enter.

4. After entering, turn off the switch of "Smart Wire Control", so that you can cancel the headphone mode of your phone.

6. What to do if the Android phone appears in headphone mode for no reason

Follow the steps below:

1. The headphone mode is when headphones are plugged in. will appear.

2. If the headphones are not plugged in, you can check if there is any foreign matter in the headphone jack.

3. If there are no foreign objects, you can try to restart and then play music or videos to see if there is any external sound.

4. If there are no headphones plugged in, there are no foreign objects in the jack, and there is no external sound when playing audio and video, it may be a system error. It is recommended to go to a mobile phone after-sales service center to flash the machine. If it is within the warranty period, this kind of work is free.

Solution to mobile phone headset mode:

1. Click on mobile phone settings.

2. Find General.

3. Click on Accessibility.

4. Swipe down to find the audio call method.

5. Check whether the audio call mode is automatic. If automatic does not work, manually switch to the speaker.

7. What to do if your phone is in headphone mode

There are two situations when your phone is in headphone mode:

The first is the headset you set in the settings. Mode

Secondly, the headphone jack of your mobile phone is broken when you plug in the headphones, and the copper piece inside comes into contact, causing you to plug in the headphones. It also displays the headphone mode

The first method of detection is very simple

1. Change the profile mode to standard mode

2. Press and hold the # key in standby mode

3. Perform factory settings on the phone

If none of these three methods work, take the jack that you plugged in to a repair place and have it repaired

Hope this helps. Thank you!