Joke Collection Website - Blessing messages - What points should be paid attention to when raising cattle?
What points should be paid attention to when raising cattle?
Taboos and precautions for raising cattle
Taboo introduction of beef cattle
Cattle raising and new cattle farms in China mainly rely on cattle raising technology, and the introduction is strictly controlled. The rising speed and length of beef cattle mainly depend on the variety of beef cattle, and the quality of the variety directly affects the profit or even the loss of beef cattle. Good beef breeds produce high meat, while poor beef breeds can't even be eaten for a long time, even less than 500 kilograms a year. The profit of breeding beef cattle like this is greatly reduced or even lost, so it is very important to introduce beef cattle.
Second, the selection of beef calves The selection criteria for beef calves are that each head is big and the legs are thick.
Third, healthy calves, don't choose calves with depressed heads. Fourth, fattening cattle choose bulls, which rise quickly and have high meat yield.
When introducing beef cattle, we should pay attention to the epidemic diseases of beef cattle to prevent major epidemics from being introduced into cattle farms. Sixth, imported calves should distribute feed in time, because with the growth of calves, the demand for nutrition is also increasing.
Key points of cattle raising technology
The main point of cattle raising technology for cattle breeders is to learn before raising cattle. For the newly-built cattle farm, there should be a professional animal husbandry veterinarian. Without good cattle raising technology, there is no guarantee of funds. When the funds are invested in the newly introduced calves, once the epidemic situation and major diseases occur, it will cause huge economic losses. The main points of cattle raising technology can be divided into the following three points.
First, the treatment of beef cattle diseases, the use of veterinary drugs, in order to treat beef cattle diseases. The second is disease prevention. Imported calves should be vaccinated and vaccinated in time.
Third, the feed mix, beef cattle coarse feed and concentrated feed are reasonable and nutritious, which improves the upward trend of beef cattle. The proportion of beef cattle feed directly affects the rising trend of beef cattle, so the proportion of beef cattle feed and fattening cattle feed is very important in raising cattle. Compared with fattening beef feed and breeding cattle feed, it is more important and there is no good formula. Beef cattle with good nutrition grow slowly, and their economic benefits are greatly reduced, which means that they grow slowly if they eat too much. 1, beef feed formula
Cotton cypress 15%, bean cypress 5%, wheat bran 10%, corn 65% and premix 2 5%. Feed formula for fattening cattle.
Cotton cypress 15%, bean cypress 10%, wheat bran 10%, corn 60%, premix 5%, and feed ratio for breeding cattle.
Cotton cypress 10%, bean cypress 5%, wheat bran 15%, corn 45% and magnetic powder 20%. Premix 5%
When fattening cattle, the quality of feed directly affects the upward trend of beef cattle. In order to better enable beef cattle farmers and cattle farmers to obtain greater economic benefits,
Shandong Zhongmu thoroughbred beef cattle farm is a friend of beef cattle breeding, which is risky and needs to be cautious in investment. To build a large-scale beef cattle farm, it is necessary to build an advanced and scientific beef cattle farm, which not only saves labor and cost, but also is easier to manage.
Key points of cattle farm construction
The focus of building a large-scale cattle farm is mainly to raise cattle, save labor and reduce costs, and build it into scale and standardization.
var script = document . createelement(' script '); script . src =‘static . pay . Baidu/resource/baichuan/ns . js‘; Document.body.appendChild (script);
Fan Hua Beef Cattle Farm not only saves labor costs and reduces capital investment, but also is easy to manage.
First, the cattle farm should be built with two separate troughs, one is the office area and the other is the breeding area, and the office area and the breeding area should be separated.
Second, there is a disinfection pool at the entrance of beef farm to disinfect vehicles and personnel entering the farm to prevent external sources of infection from entering the farm. Third, there is a disinfection room at the separation of the office area and the aquaculture area to disinfect the personnel entering the aquaculture area.
Fourth, beef cattle houses should be planned in a standardized way, and breeding houses and isolation houses should be separated to prevent infection. Construction of South Beef Cattle Farm in China ......
What should we pay attention to when raising cattle in rural areas?
Everyone knows that raising cattle is slower than keeping calves in captivity, but our advantage lies in saving feed costs. In order to improve the breeding profit of cattle, we should also find the right profit point in feed. Let's first understand the essence and advantages of liberating cattle. It is very simple for us to improve the profit of raising cattle. First of all, we should start from small details, whether in the addition of concentrated feed or in the choice of stocking areas. We all have the perfect choice. The first choice is to save concentrate. The nutritional value of pasture is much higher than that of hay, so we can appropriately reduce the amount of concentrated feed to ensure the daily physique of beef cattle. This can save the cost of concentrated feed, and the activity of raising cattle is higher than that of captive cattle. We can properly control the activity of raising cattle, thus reducing the physical consumption of beef cattle. If the stocking time is well controlled, we should choose the mode of leaving late and returning early. The journey should not be too far. Grass covers should be lush and diverse, so that cows like to eat, and try to reduce the habit of choosing food. This can store the weight of beef cattle, increase the consumption of beef cattle, and thus obtain a higher profit rate on forage. The consumption of health care drugs needs certain health care measures for beef cattle fattening, which is not what everyone thinks. We should always strengthen the stomach and expel worms for beef cattle, including beef cattle diseases and common diseases. We all need to prevent them. Everyone knows that health lies in exercise, and the amount of activities in captivity is obviously insufficient, so the use of various drugs will increase. However, if we have enough activities in raising cattle, our health will be obviously guaranteed, thus reducing the cost of drugs and improving the breeding profit for us. Through the above points, we can completely improve the profit of cattle raising, so as to reach the same level as captive cattle, narrow the profit gap bit by bit, and increase the profit of cattle raising from every detail. This is our most scientific and successful fattening and breeding technology.
What should we pay attention to when raising cattle?
Everyone knows that raising cattle is slower than keeping calves in captivity, but our advantage lies in saving feed costs. In order to improve the breeding profit of cattle, we must find profit points in feed. Let's first understand the essence and advantages of liberating cattle. It is very simple for us to improve the profit of raising cattle.
First of all, we should start with small details, whether adding concentrated feed or choosing stocking areas, we should have the most perfect choice. The first choice is to save concentrate. The nutritional value of pasture is much higher than that of hay, so we can appropriately reduce the amount of concentrated feed, which can ensure the daily physical fitness of beef cattle and save the cost of concentrated feed.
The activity of raising cattle is higher than that of captive cattle, so we can properly control the activity of raising cattle, thus reducing the physical consumption of beef cattle. If the preparation time is well controlled, you should choose the mode of leaving late and returning early, and the distance should not be too far. Grass cover should be lush, so that cattle like to eat, and the habit of choosing food for beef cattle should be reduced as much as possible, so that we can store the weight of beef cattle, increase the feed intake of beef cattle, and thus obtain a higher profit rate of forage.
The consumption of health care drugs, beef cattle fattening needs certain health care measures, not just eating and drinking as everyone thinks. We should always nourish the stomach and expel worms for beef cattle, including beef cattle diseases and common diseases, and we all need to prevent them. Everyone knows that health lies in exercise, and the amount of activities in captivity is obviously insufficient, so the use of various drugs will increase, but if we have enough activities to raise cattle, our health will be obviously guaranteed, thus reducing the cost of drugs.
Through the above points, we can completely improve the profit of cattle raising, so as to reach the same level as captive cattle, narrow the profit gap bit by bit, and increase the profit of cattle raising from every detail. This is our most scientific and successful fattening and breeding technology.
What cattle diseases should we pay attention to when raising cattle?
Cow moss. . . .
What should I pay attention to when raising cattle?
Daily attention should be paid to the health management, epidemic prevention and fattening of cattle farms. A series of questions about raising cattle can be found in Baidu Xiadahan Cattle Farm. I hope it helps you.
What problems should we pay attention to when raising cattle?
There are many things to pay attention to. I have been raising cattle 1 1 year. Basically, I think we should pay attention to the following points.
Variety selection
Control the age of purchased cattle.
Control the weight of purchased cattle
Quality judgment of buying cattle health
Feed utilization
Feed proportion
Vaccine epidemic prevention
Disinfection management
marketing channel
How to raise cattle and sheep? What should I pay attention to?
Matters needing attention in cattle raising Cattle raising technology Cattle breeding technology Popular science cattle raising technology 1. Look at the trough. If the calf doesn't eat the feed in the trough, it will slowly walk away, indicating that there is too much feed for the calf. If only dregs remain on the bottom and wall of the tank, the feeding amount is moderate; If the trough is licked clean, it means that the feeding amount is insufficient. Second, the amount of feces from the dung calf steak increased, and the feces were slightly thicker than when only breast-feeding was used, indicating that the feeding amount was normal. With the increase of feeding amount, the defecation time of veal steak forms a new law, which is often discharged before and after feeding every morning and evening. Feces fuse together to form countless lumps, which are as shiny and soft as the feces of an adult cow. If the feces discharged from veal steak are shaped like porridge, it means that there is too much feeding; If the discharged feces are as thin as water and the buttocks are stained with wet feces, it means that the feeding amount is too large or the water is too cold. At this time, just stop feeding twice and then add corn flour, bran, etc. To feed, diarrhea can stop. Thirdly, according to the fixed feeding time of food phase, calves can form conditioned reflex after exceeding 10, and calves will come to look for food every day, which shows that the feeding amount is normal; If the calf lingers in front of the feeding room after eating clean food, it means that the feeding quantity is insufficient; If the calf doesn't want to go to the trough when feeding, it means that it was overfeed last time, or the cow may be sick. Fourth, when watching the belly feeding, if the calf is obviously depressed and refuses to eat in front of the trough, this means that the calf may catch a cold or suffer from bulimia; If the calf's abdomen is obviously depressed, its appetite is also very strong, but it just smells in front of the trough and then walks away, indicating that the feed changes too much and is not palatable, and the moisture of feed water is too high or too low; If the calf's stomach is swollen, it won't eat, which means it ate too much last time, and it can get better as long as it stops feeding once. Shandong rural credit cooperative cattle, mutton, mutton and donkey breeding farm. Perennial supply; High-quality beef cattle breed bull, professional fattening bull, beef calf, fattening calf, calf rack, ternary hybrid calf, Luxi yellow calf, Simmental calf, Charolais yellow calf, Limuzan calf. Sheep breeds include fattening lamb, goat lamb, Boer goat lamb, small-tailed Han sheep lamb, Asian antelope and Dubo sheep. Donkey breeds include dezhou donkey Guanzhong Donkey, Xinjiang Lvguangling Donkey, Pony Donkey and Little Donkey Breeding Donkey. Donkey breeds are the most complete, while beef cattle, mutton sheep and meat donkeys have low prices. Farmers from all over the country are welcome to visit and buy. Introduction of fine beef cattle: There are mainly excellent beef cattle such as Simmental, Charolais and Limousin as male parents, and Luxi yellow cattle as female parents for cross improvement. The crossbreeding between improved beef cattle and China yellow cattle generally has the characteristics of roughage tolerance, strong adaptability and fast growth. The birth weight, daily gain, pulling power, meat quality and slaughter rate have all been significantly improved, showing good heterosis. Under good environmental conditions, the daily gain of hybrid calves during lactation is 0.6- 1. 14 kg, and that during fattening is 2.0-2.5 kg. The weight of 10 month old can reach 500kg ~ 550kg, which is 47% ~ 87% higher than that of local yellow cattle. Fattening of young cattle: mainly using the characteristics of fast growth of young cattle to give high-level nutrition, and carrying out strong chemical fertilizer breeding, so that cattle can reach a certain slaughter weight and fat; Fattening of adult cattle: This kind of cattle skeleton has basically grown up, so scientific feeding management should be adopted to fatten it in a short time, improve its meat quality and increase its meat yield. Sheep Breeding Technology: See bbs.xumuj/showforum-21.aspx, Livestock Street, China, the cattle and sheep area.
Hope to adopt
Do cows get sick easily? What should we pay attention to when raising cattle?
Cattle raising technology
In some rural areas of China, raising cattle is still an indispensable driving force for agricultural production. Scientific feeding management and reasonable service, especially strengthening the feeding management of cattle during busy farming, are of great significance to protect the health of cattle and promote agricultural production.
First, the main points of raising cattle
Cattle in the busy farming period are generally fed three times in the morning, at noon and at night, and the cattle net feeds forage again in the middle of the night. Concentrate can be fed twice in the morning and at noon. Feed more grass and hay at night. Feeding should be done about two hours before the service, so that cows have enough time to eat and ruminate, and should rest for about half an hour after the service before feeding. Feed chopped coarse materials first, then sprinkle a small amount of concentrate into the coarse materials, add a proper amount of water, and stir evenly until it is finished. It's best to sprinkle some salt water on the leftover grass, so that the cows can eat all the leftover grass. In the diet, cows must be provided with enough drinking water, usually 3 to 5 times a day, with a total amount of 30 to 40 kilograms. Feed 20 ~ 30 grams of salt every day. Don't drink water immediately after the service. You need to rest for about half an hour before drinking. After drinking, give the cows a proper rest time to ruminate.
Second, the main points of cattle management
The fence should be spacious, clean, ventilated and dry. It is necessary to pad, get up and sweep the floor frequently so that the cows can rest comfortably. It is necessary to remove the dust and feces on the surface of cattle, maintain the hygiene of cattle, promote blood circulation, eliminate fatigue, improve health and prevent panel diseases. After the daily service, the mud on the cow's limbs and hooves should be wiped clean to keep the hooves round and straight, and the hooves should be repaired 2 ~ 3 times a year. When the diseases of cattle are found in time, such as listlessness, loss of appetite, dry nose, abnormal feces, elevated body temperature and other symptoms, they should be stopped immediately and treated in time. Pay attention to heatstroke prevention and fly killing. Due to the underdeveloped sweat glands and poor heat resistance of cattle, after the service, the cattle should be driven to the shade to rest, and the buffalo should be driven to the pond to take a bath to dissipate heat. In summer, smoke with the residual grass and Vitex negundo in the cowshed to prevent mosquitoes and flies from invading cattle. The temperament of breeding cattle directly affects its utilization effect. The temperament of male beef cattle should be based on physiological characteristics. According to research. Cattle farmers have a strong memory, and they can remember the people and things they have deeply contacted. * * * Male beef cattle should start from infancy. Cattle breeders should not beat male beef cattle at any time, and establish feelings with them through activities such as brushing their teeth and stroking.
You can't just change beef cattle breeders. When treating beef cattle, the breeder of the cattle net should try to avoid it and be gentle with beef cattle. Boer goat. When beef cattle show panic, they should keep quiet in a gentle voice. Violent cattle should always observe the performance of beef cattle, such as crawling front hoofs or rubbing the ground with horns, which is the performance of preparing horns, and beef cattle breeders should take effective measures to stop it.
Third, the main points of cattle breeding
The harness should be suitable for the cow's body, the size and angle of the cangue should be appropriate, and the length of the harness should be adjusted to match the plow, so as to improve the use efficiency and avoid injury accidents. In the process of labor, we must implement the principle of "keeping in the middle, combining raising with using" so that people and cattle can get along well and not be whipped at will. To combine work and rest, you usually need to work for 2 hours and rest for half an hour. It is recommended to work no more than 8 hours a day. If cows are found to have neck extension, back depression, tail root lifting, toe scratching, inconsistent speed and continuous urination during service, they should be given proper rest. If there is loss of appetite after service, but there are no other symptoms of illness, the rest time should be appropriately extended.
How about raising cattle in the countryside now? What should I pay attention to?
Our farm has the most complete variety of beef cattle. Welcome to visit our website.
- Related articles
- Does Bank of Ningbo's credit purchase have anything to do with flowers?
- Friendly greetings from classmates
- Aunt, I don't want to work hard.
- How does KFC order takeout?
- I don't have a bank card, but the news says my certificate has expired.
- If there is no transaction record in the bank card within six months, the payment function will be closed. What do you mean by transaction records? Does transfer count?
- Tell me how you feel when there is no wifi and no traffic.
- Is programming cat elite class a routine?
- Example of project manager’s year-end personal work summary
- Tencent dawang card can't send text messages