How to distinguish the authenticity of panda wires? 6 tricks to help you get it easily.

1. Look at the anti-counterfeiting code

There is an anti-counterfeiting label on the outer packaging of Panda wire products, uncover or cut off the anti-counterfeiting label, find the 15-digit password, dial the phone on the surface or send a text message for inquiry. The system will prompt you to be authentic when inquiring for the first time; After two or more inquiries, you will be prompted that you have been inquired and the time of inquiry, so beware of counterfeiting; If the entered security code does not exist, you will be prompted to guard against counterfeiting.

step 1: cut off the security label with a knife (the action must be light, so as not to accidentally hurt the wire skin).

step 2. turn the cut anti-counterfeiting label upside down, and you can see the total ***15-digit data on the reverse side of the label, which is from right to left and from top to bottom. You can also write down 15 data in front of the mirror, so you won't make any mistakes.

At the same time, there is an anti-counterfeiting technology on the surface of the anti-counterfeiting label, which, like RMB, is printed with anti-counterfeiting ink.

A: Looking at the word "panda wire" on the front, it is golden and green.

B: put the security label slightly flat, and the color of the word "panda wire" is blue.

second, there is a watermark of "Shanghai Famous Brand" on the big label indicating the specific information of the wire.

third, the brand LOGO of the panda wire. The lines on the panda's back, head and left face are discontinuous, not all connected in a line.

iv. panda wires BV, BVVB and other strong wires have steel seals on their skins, and the fonts are composed of Arabic data and English, indicating the product specifications, models, manufacturers and other information. Ordinary brand wire skin is basically inkjet printing, without this technology.

5. The weight of each coil of panda cable is basically the same, and there will be no big difference, and there will be a little fluctuation up and down. (The picture below shows the weighing photo of 1.5 square BV single-core wire, showing the weight of 2.1kg). If the weight difference is too much, it must be a fake or a short weight.

name and specification per 1m weight BV single-core cable 1.5 square 2.kgBV single-core cable 2.5 square 3.15kgBV single-core cable 4 square 4.6kgBV single-core cable 6 square 6.6kg four-core telephone cable HJYV2.3kg data TV cable SYWV-75-56.kg eight-core computer cable UTP super-category 5 2.5kg

VI. The conductor structure of Panda wire is all national standard. It can be measured with vernier caliper, Ordinary small brands and fakes can't meet the requirements of the national standard.

Name and specification Conductor structure (i.e. copper core diameter) (mm)BV single-core cable 1.5 square 1 core *1.38BV single-core cable 2.5 square 1 core *1.78BV single-core cable 4 square 1 core *2.25BV single-core cable 6 square 1 core *2.76 four-core telephone cable HJYV4 core *.5 eight-core computer cable UTP is over category five. Identification method of anti-counterfeiting trademark

1: First, take off the anti-counterfeiting trademark and hold it with pliers or tweezers. Note that the word "panda wire" on the trademark is blue.

2: Bake the trademark with fire, and use a lighter. Be careful not to get too close to prevent the trademark from igniting. After baking, the color of these four words faded, leaving only four imprints.

3: Don't worry, wait a moment. After a few seconds, these four shallow marks of panda wire gradually begin to recover to blue.

4: finally, all the words that were not seen after baking changed from the beginning to the appearance before baking.

isn't this method amazing? If you want to buy panda wires, or have already bought them, you can identify them according to the method I just introduced! If you find other ways to distinguish the authenticity of panda wires, don't be stingy and share them with you!