What about the urine sensor? How to clear the blocked urinal?

When the house is being renovated, people have to install a urinal in the bathroom, but many people are inductive, but they don't know how the quality is when they use it, and how to clear it if it is blocked. I don't know much about these. What about the urine sensor? How to clear the blocked urinal? Next, the lightning home trimming Xiao will introduce it to you. I hope you can refer to it when decorating.

What about the urine sensor?

1. How about the intelligent experience of urine sensor: The sensor urinal adopts advanced infrared sensing technology, so you can sprinkle some water in the product after buying it to see if it will flush immediately. People walk/kloc-stop washing for 0/5 seconds and stay on standby.

2.

How to choose the specifications of urine sensor: the distance from the center of the water inlet of urinal with flushing valve to the finished wall should be not less than 60mm, the thickness of blank at any part should be not less than 6mm, and the depth of all sanitary ceramic water seals with integral traps should be not less than 50 mm.

3.

How to clean the urine sensor easily: carefully observe the surface to see if it is floodlit under the light, and then touch the surface with your hands, which should be smooth, smooth and crystal clear; No obvious pinholes, lack of glaze and cracks; Tap on the surface, the sound is crisp and pleasant, without cracking or deformation.

4. How to use urine sensor to detect water quality on the spot: You can detect water quality on the spot when purchasing, and see the washing speed and cleanliness.

2. How to clear the blocked urinal?

1. First of all, if you find that the urinal at home is blocked, you can use a tool similar to wire to dredge it first. There are iron hangers at home. If this is not enough, then we can go to some hardware grocery stores to buy some special tools to clear the toilet and discharge these blockages under the pressure.

2. Next, the urinal is easily blocked by some similar paper objects. At this time, you can pour boiling water like the temple part of the urinal and soften it as much as possible. After a while, we'll go and see it again. If these objects are dispersed by bubbles, then we can wash them down with a big bucket of water under pressure, which not only cleans the urinal, but also solves the problem of blockage.

What's more, if the urinal is blocked by some hard objects, then we need to find a longer plastic water pipe, connect one end of the plastic water pipe to the urinal mouth and the other end to the tap water pipe, then block the urinal mouth with useless cloth and other things, and then turn on the water. Under the action of pressure, it is beneficial to dredge the pipeline by water pressure.

3. How to install the urine sensor

1.

When installing the urine sensor, to install the height of the urinal sensor, you must first install the urinal pair, then buy the sensor, and prepare the necessary tools, such as hammer, nail, tape measure, tape measure, Phillips screwdriver, wrench, insulating tape or waterproof tape. The plumber's set should be basically ready.

2.

When installing the urine sensor, determine the height of the urine sensor according to the installation height of the ceramic urinal, so as to avoid too high or too low installation (too high makes the length of the urinal sewer pipe insufficient and affects the use of some people); The height of ceramic urinal from the ground is about 950mm, and then the appropriate urine sensor size is determined according to the conditions of ceramics and internal pipelines; Installing urine sensor

When the urine sensor is used, I don't know how to remove it. The article above is about how to clean urine sensor and urinal. If you want to know,