Why can't the nfc function of Huawei mate8 be used?

First, aim at the NFC antenna position when swiping the card, as shown in the figure, the top position directly above the rear camera.

When can't I use NFC function? If it is the following scenario, you can try to solve it:

First, the mobile phone is insensitive (unresponsive) when reading the bus card/bank card/ID card.

1, in Settings >; More > NFC switch is turned on in the menu interface of NFC. Note: If it is a customized version of mobile phone or telecom, there will be one more control switch under the same interface: read/write/point-to-point. You also need to turn on this switch when reading NFC tags.

2. If the "bus card/bank card/ID card" is put on the mobile phone and there is no response, it is recommended to adjust the position. In addition, it is suggested that the "bus card/bank card/ID card" be placed vertically, just near the top of the mobile phone.

Mate8 brush bus card icon

Second, China Mobile's "Baohe" payment function cannot be used.

1, you need to use China Mobile's SIM card and support NFC function; You can contact China Mobile to confirm whether it is supported. If not, you should apply for replacing the SIM card.

2. Install "Baohe" and corresponding plug-ins (security plug-ins, payment plug-ins, traffic cards or bank card application plug-ins);

3. hold "machine housekeeper > self-startup management > startup by other applications > turn on the switch of package security plug-in", as shown in the figure.

4. If the mobile SIM card is inserted into the internal card slot (card 1). Go to "Settings > More > NFC". Make sure the NFC security chip option selection card 1 and touch the default payment application selection and package to make payment.

5. If the mobile SIM card is inserted into a foreign card slot (card 2, SD/SIM card slot). When using the package for the first time, please click "Settings > Temporarily Disable Card 1" in "Dual Card Management" to ensure that SMS authentication is sent by Card 2. Select Card 2 in NFC security chip options, and the default payment application selects the package.

6. After entering the package, install the corresponding bus card/bank card and set the card as the default card. If the card is a bus card, it needs to be recharged before use.