Technology and matters needing attention of tile laying

Home decorative brick is an essential building material. They can be seen in kitchens, bathrooms, balconies, bedrooms, bedrooms, etc. Ceramic tiles make our living space more comfortable and beautiful. Although tiles are usually very simple, tiles are very simple. There are still many places to pay attention to when laying ceramic tiles. Let's take a look at the process and precautions of paving small-sized series tiles for your reference.

Tile laying technology and matters needing attention

Tile laying technology

(1) Foundation treatment: thoroughly clean up dust and sundries, without defects such as hollowing, cracking and polishing.

(2) Elastic line: Before construction, the elevation control line will pop up around the wall, and the reticle will pop up on the ground to control the size of the floor tile.

(3) Pre-purchase: First, strictly select the color, texture and surface level of the floor tile according to the design requirements of the drawings, and then pre-pave it according to the drawings. Adjust and replace the size, color and texture errors that may occur in pre-laying, until the best effect is achieved, and the stack is flat and ready for use.

(4) Paving: 1: 3 hard cement mortar is used for paving, and the mortar thickness is about 25mm. Before paving the road, the back of the floor tile is wet and the front must be dry. Place the floor tile on the cement mortar as required, and tap it with a rubber hammer until the compactness meets the requirements.

(5) Connection: After the floor tile is completed, the joints shall be cleaned 24 hours after the floor covering is completed. Before the connection, the impurities in the gap between the floor tiles should be cleaned up and connected with special caulking agent.

(6) Cleaning: dry during construction, and after completion (generally after 24 hours), clean the floor tile surface with cotton yarn and other materials.

Precautions for Tile Laying-Gap

Tile laying is a very important step in family decoration. There are various styles of tiles on the market now, which makes the tile laying standard different from the tile laying method. In the process of ceramic tile production, the same batch and the same model. Length, right angle and straightness may be slightly deviated. In the process of tiling, there will be some errors, and the tiles will be affected by thermal expansion and cold contraction, and there must be enough gap to make them have a certain shrinkage space in the process of tiling.

Precautionary measures for wooden tiles. wall

With the continuous progress of society and the rapid development of economy, there are various styles of ceramic tiles in the market, which makes the laying standards of ceramic tiles different. The choice of tile laying method is very important in the process of tile laying. The walls must be carefully inspected before laying bricks. If the wall is broken, it must be treated in advance. Before laying wall tiles, putty should be prepared for the walls. If the tiles are not directly treated, the surface of putty will not hang cement, which will easily make the tiles fall off, which will make the tiles have certain safety in the use process. Hidden danger.

Tile paving skill-soaking in water

Ceramic tiles are widely used in modern home decoration. Due to various styles of tiles in the market, the methods and standards of tile laying are different. Before laying tiles, tiles must be soaked in water. No matter what the quality is, there are many tiny cracks on the tiles. In the process of laying tiles, it has certain water absorption. If the tiles are not treated with water or the water time is not enough. In the case of direct paving, the paved tiles will absorb some moisture in cement, which will lead to cracks between tiles and cement, poor adhesion of tiles, and lead to problems such as hollowing and tile falling off.

Precautionary measures for wooden tiles. standard

Tile laying is very simple in construction, but there are also some precautions in the process of tile laying. What are the tile paving methods? What is the standard of tile paving? According to the national standard, the surface quality of high-quality ceramic tiles should be at least 95% of the surface of 0.8 meters, and there are no obvious defects. Of course, most tiles on the market meet this standard. When viewing the tile, please accept it from the package. See if there are ripples, glaze, spots, cracks, bumps and lack of glaze on the surface of the product. The above is a brief introduction of tile laying methods and tile laying standards, hoping to help you lay tiles.

Tile laying technology and matters needing attention

The above is the introduction of tile paving. If you want to know more about tile laying, please pay attention to Tuba Rabbit, which will provide you with more comprehensive, detailed and updated information.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~