What should I do if Apple's 6spu phone is stopped?

1.What if Iphone6s is stopped? What should I do if Apple 6s is stopped?

Solution 1:

If you enter the wrong password multiple times and the iPhone displays "Disabled", you must enter recovery mode to erase and restore the device. If you have previously synced with iTunes or iCloud, you can restore from backup after erasing the iPhone.

1. Talking about the device entering recovery mode: Turn off the iPhone, plug in the data cable and press and hold Home until the phone displays "Connect to iTunes", and then release the Home button.

2. Opening iTunes at this time will prompt: "iTunes has detected that an iPhone is in recovery mode. You must restore this iPhone before you can use it with iTunes. " Click on iPhone to restore. (If the firmware has been downloaded, hold down shift and click Restore to select firmware recovery).

3, just wait for the recovery to complete the boot activation, but the information in the phone is gone.

Solution 2:

The above method may take a long time. Here is a simple and quick way to use it, which is suitable for the unfamiliar iPhone Xiaobai.

If it is an iPhone4 phone, you can directly disable it with AISI Assistant. Click to view the specific method. After stopping using the product, the mobile phone materials are all there!

If it is a mobile phone with iPhone4S or above, you can directly use AISI assistant to brush the machine, and it takes 10 minutes to really brush the machine with one button.

2.2. What should I do if the iPhone 6s has been disabled? Solution.

Too many incorrect screen lock password entries on the iphone indicate that the iphone has been disabled.

Solution:

Step 1: Install iTunes on your computer and open it.

Step 2: Turn off the phone, plug in the data cable, pay attention to only plug in this end of the phone, and don't connect the computer first.

Step 3: Press and hold the Home button on the mobile phone, which is the button at the bottom of the screen, and then plug the other end of the data cable into the computer to ensure that the Home button is not loose.

Step 4: Just release the screen on your phone that requires iTunes connection, and then refresh the firmware (click Restore iphone).

3. What if Apple's 6s mobile phone iphone is stopped?

1. First turn off the iphone6s, and then press and hold the "power button +Home button" to turn it on at the same time. After the Apple logo appears, release the power button and press and hold the Home button for about 10 seconds until a picture of the data cable connected with the iTunes icon appears on the device screen. At this point, connect the device to the computer through the data cable and open iTunes.

2. On the device page of iTunes, click Restore directly, or download the firmware package of the corresponding device.

3. Then hold down the "Shift" key and click "Restore iPhone/iPad." Button, in the file manager window that appears, select the newly downloaded firmware package with the suffix ipsw for recovery, and then re-enter the previous iCloud account and password on the device to use it normally.

4. After the restoration is completed, you can choose to restore the previous content through iTunes previous backup or iCloud backup.

4.4. What should I do if the iPhone 6s display has been disabled?

1. Turn off the iphone6s.

2. Press and hold the "power key +Home key" at the same time to start the machine. After the Apple logo appears, release the power button.

3. Continue to press and hold the Home key for about 10 seconds until the picture of the data cable connected to the iTunes icon is displayed on the device screen.

4. Connect the device to the computer through the data cable, and then open iTunes.

5. On the device page of iTunes, click Restore directly, or download the firmware package corresponding to your device.

6. Hold down the "Shift" key and click the "Restore iPhone/iPad" button.

7. In the file manager window that appears, select the firmware package with the suffix ipsw just downloaded to restore it.

8. After completion, you can re-enter the previous iCloud account and password on the device for normal use.

5.5. How to unlock the iPhone 6s after it is disabled?

Unlocking method 1: brush the machine and re-enter the ROM.

You can remove the password lock setting, provided that you can brush the machine. Unlocking method 2: Double erasing can be considered as an operation of erasing mobile phone data from the professional point of view of brushing enthusiasts.

Regarding what wipe means, the professional answer is: w ipe means restoring factory settings, including deleting all contacts, text messages and installed software. Commonly known as hard start, restore factory settings.

Note: After erasing, you need to redo the app2sd and root permissions. And the important partition steps of app2sd have to be repeated.

Double erasure means clearing cache and memory data. Unlocking method 3: Use adb to delete the forgotten screen lock password. Operation steps: Connect the mobile phone to the computer without opening the data connection, and do it in charging mode.

After unzipping adb.zip on the computer, put the adb file in the root directory of the computer C drive. Continue to delete *. Key file.

Enter adb to restart or manually restart the phone to take effect.

6. What should I do if I stop using my 6.iphone 6s?

Use AISI assistant to remove the disabled iPhone:

1, download the latest AISI assistant, connect the mobile phone, and click "Advanced Player-Cancel iPhone Deactivation" in the toolbox;

2. Next, you will be prompted to enter DFU mode. Just do as you are asked.

How to enter DFU mode:

1) Keep the device in startup mode or recovery mode and plug in the data cable.

2) Press the HOME button of the device first, and then press the power button of the device. Do not release the power button of the device for about 4 seconds before the screen of the device goes out, but do not release the HOME button before the software prompts "Success".

3. When the operation enters DFU mode, AISI Assistant will start to run automatically.

4. In less than 2 minutes, the powerful AISI assistant was completely stopped! After the phone is restarted, the iPhone has been deactivated and can be released.

7. The display on the screen of Apple's 6s mobile phone has stopped. What should I do?

1, turn off the iphone. If pressing the power button doesn't work, please hold down the Home button and the power button at the same time! Wait about 10S, and the phone will automatically turn off!

?

2. First, start itunes on the computer, insert the USB big end of the data cable into the computer, press and hold the Home button, and then insert the other end of the data cable into the mobile phone. Please don't loosen the Home button during this process!

?

3. When you see the prompt to connect to itunes on the mobile phone screen, release the Home button, as shown in the figure below!

?

4. itunes on the computer will pop up: "itunes has detected that an iphone is in recovery mode. You must restore this iphone before you can use it with itunes. " As shown in the figure below.

?

5. Next, you can use itunes to restore your phone! After the recovery is successful, you can resynchronize the backup and restore the address book and settings!

8.8. The iPhone 6s phone has been disabled. How to unlock it?

Hello, I'm glad to answer your question:

1, iPhone is locked and disabled, and the phone needs to restore the system. However, if you restore the system, all the previous data on the mobile phone will be lost, so you need to use iTunes to back up the data before restoring. If you don't have iTunes software installed on your computer, you can go to Apple to download and install it.

2. Then, please connect the iPhone and the computer with the original data cable, open the iTunes software, and click the iPhone icon in the window.

3. In the summary interface, find and click the "Back Up Now" button to back up the data on the iPhone according to the prompts.

4. After the data on the 4.iPhone is backed up, the next thing to do is to put the phone in recovery mode. Only in recovery mode can the system be restored for the mobile phone. Follow these steps to put the phone in recovery mode:

Press and hold the power button for a long time. When the power off option appears, please slide to turn it off.

Then press the power button to turn it on, and Apple's logo will appear on the screen. Do not loosen the power button;

"Then press and hold the Home button of the home screen until the screen turns black;

When the screen is black, please release the power button and continue to press and hold the Home button on the home screen until iTunes on the computer detects that an iPhone is in recovery mode.

Note: If you can't enter the recovery mode, please operate it several times.

5. Next, click the Restore iPhone button in the iTunes window.

6. Then iTunes will connect to the Internet to detect the latest system applicable to the current mobile phone, and prompt whether to erase the data and restore it. Click the Restore button to continue.

7. When iTunes is verified, the system used for recovery will be automatically downloaded from the Apple server. After the download is completed, the system will automatically restore to the mobile phone. After the recovery is completed, please reactivate it step by step according to the mobile phone prompts.

I hope my answer can help you!

9. What if Apple 6s plus stops?

Unlock p 34—8.9.9—512 ┲ˉ iPhone professional solution lost mode can be used to activate ID lock positioning.

Step 1: iPhone activation needs to install SIM card first, so the first step of activation still needs to install SIM mobile phone card first.

Step 2: After installing the SIM card, we can start the mobile phone. The method is to press and hold the power button on the top of the iPhone for a few seconds to enter the initial startup interface.

Step 3: Set the iPhone language.

We need to use simplified Chinese, so we chose simplified Chinese when choosing the setting language.

Step 4: Choose your country or region.

Here we need to choose "China"

Step 5: iPhone keyboard settings

Click "Next" by default here.

Step 6: iPhone connects to WLAN.

Because the introduction is about the activation of connecting Wifi wireless network, it must be carried out in the environment of wireless network. Just enter the wireless password and connect.

After completion, you can enter the welcome interface of the iOS system network, and you can choose to accept it.

Step 7: Set the iPhone's iOS location service. Here we can choose to enable or disable location service, because it can be set in the system later, so users can choose one at will.

Step 8: Set up iPhone

Next, let's enter the iPhone settings. Because it is a new machine, we need to create a new iPhone, so we need to choose "Set as a new iPhone" here or choose not to create it.

Set to skip the id application for the new iPhone.

Step 9: Set up iCloud

You can choose not to use it here for the time being.

Step 10: iPhone fingerprint identification settings

Use positioning

Do not send report

Don't use Siri

IPhone activation complete: welcome.

After that, you can see the new iOS system interface.

10. What if Apple's 6s apple id has been stopped?

Apple's 6s apple id has been deactivated. Solution:

1. Log in to your account with itunes, and it will prompt you that your account has been disabled. Click Reset.

2. Select the authentication method (email or confidentiality). After verification, enter the password for the account and click Unlock.

3. Log in again and you're done.

4. If the account fails to log in for many times or has not logged in for a long time, iTunes Store will protect its security by disabling the account. At this point, even if the password is entered correctly, you cannot enter directly. You need to reset your account password before you can access your account. Please go to Apple's My Apple ID website to reset your Apple ID password.

1. Share accounts with too many people (such as using PP assistant, synchronization assistant, quick use of Apple assistant and other experience functions or sharing accounts in some mobile forums).

2. The login times of different IP (different devices) are too many.

3. Enter the wrong password for many times.