What about Apple 12 mobile phone WeChat background power consumption?

IPhone consumes a lot of power, and the power saving methods are as follows:

1, it's best not to use computer USB to charge iPhone, which is not satisfactory at all, and even there will be leakage, which is a common problem of many digital products. Be sure to stick to the seat charger, which is a serious problem facing the iPhone after the actual measurement.

2. Develop the good habit of turning off the switch at any time.

3. Clean the software frequently. Try to uninstall applications that you haven't touched once in 2 weeks, and then install them if necessary.

4. When closing Safari, please close the page and press the Home button, otherwise it will take up memory.

5. The battery should be charged and used at any time, and a complete charge-discharge cycle should be conducted once a month to check the power (the battery should be charged to 100% after automatic shutdown).

6. Battery packs and third-party chargers cannot be used.

7, beautification is enough, those theme beautification tools occupy a lot of memory and power consumption.

8. Regarding 9 1 mobile assistant, it is not recommended. The most terrible thing for everyone is to cause white apples and other consequences.

9. At present, it is not recommended to brush the iPhone.

10, the basic setting operation is as follows:

(1) Operator: Don't set it to automatic search, it will find the signal, which is very power-consuming. After entering, check it on China Mobile or China Unicom, and it will not be searched automatically in the future. This kind of energy saving is obvious.

2 notice: off.

(3) Sound: The vibration can be set as required. If the working environment does not need to be muted, it can be turned off completely.

(4) Brightness: set a low point to turn off automatic adjustment (automatic adjustment is a resident process, which costs more electricity).

(5) Wallpaper: It is recommended to use solid color, so that the workload of decompressing pictures will be less when the system is turned on or unlocked. This is not feasible, but the effect is particularly obvious.

[6] General settings:

A. Network: 3G will be turned on when it is not used for sharing, and WiFi will be turned on when necessary. VPN is also set in this way.

Bluetooth: off

C. location service: open when necessary.

D. Automatic locking: the setting is short.

(7) Mail, address book and calendar:

A. If the account is not used, it will be closed as "inactive".

B, get new data: off.

C calendar "new. . 。” : close.

(8) SMS: Close it repeatedly as far as possible, and close MMS when not in use (MMS costs more electricity, which may be a baseband BUG).

(9)iPod: Turn off the equalizer to turn on the power saving mode: enter the setting interface, click the power saving management, and select the power saving mode as smart power saving or super power saving as required. 2. Clean up temporarily unused applications in the background. Please turn off the screen when you are not using your mobile phone. 4. Shorten the standby time of the screen. 5. Reduce the brightness of the screen. 6. Turn down the volume. 7. When you are not using the mobile network, Bluetooth, WLAN or GPS, please turn off the corresponding functions.