The file has been deleted. How can I get it back?

Question 1: How to retrieve a file that has been completely deleted? I don't know what you mean by "completely deleted".

If you just delete the empty recycle bin (or delete it directly with Shift+Delete). Maybe we can get it back.

If it is deleted through the "Delete this file completely" function of the shredder or other software. It is impossible to recover.

Tell me about the first situation. First, all operations on disk F are stopped, and all writing operations on disk F are prohibited. Special note: the cache of programs such as cool dog or Internet TV and large graphics processing software may be on disk F, so don't write to disk F ... and don't run programs installed on disk F.

Then scan drive F with data recovery software, and you can use the function of searching for deleted files first. (Depending on the software, the name of this function may have different names, such as "Recovering Deleted Files" and "Recovering Missed Files". ) (This function focuses on searching the file table and searching for "deleted files")

You can usually find it.

If not, basically can't recover. Based on luck, you can try the function of scanning recoverable files by cluster again (the software has different names, which may be called full partition scanning, detailed scanning, or something else) (the focus of this function is to scan data directly by cluster in the hard disk data area). Judging the data starting point and end point of the file according to the scanned data. )

Restore points and files do not work. Can be ignored.

Good luck.

What recovery software to use and how to operate it. I have detailed answers to other questions. Now, I attach some links to answer questions about data recovery. You can refer to it Good afternoon.

Besides, I'm no expert. There are questions to discuss. Just send text messages directly in the station. I don't surf the Internet often.

zhidao.baidu/...9

zhidao.baidu/question/ 130262275

Question 2: How to retrieve the files deleted by DELETE? You should set the deletion file to be deleted directly without going through the recycle bin. For deleted files, only some software can be used to retrieve them through hard disk traces. There are many kinds of such software. Baidu will know it at once. But I want to remind the landlord that it is risky to get it back in this way. I once had a hard disk, and the data deleted by mistake was recovered by software. As a result, a physical bad track was generated during the recovery process, which could not be repaired, resulting in the scrapping of the hard disk (fortunately, within the warranty period). Therefore, unless it is a very important document, this method must be used with caution.

Question 3: If you accidentally delete the files in your computer, how can you retrieve the files that were deleted by mistake and emptied from the recycle bin? 1. You can resume in Start/All Programs/Accessories/System Tools/System, interview in the computer and resume the system. You can restore deleted things. You can try! I once deleted everything in QQ and emptied the recycle bin. Later, I restored the system and restored it. You can also download a recovery wizard software, which is available in many places. For example, in Baidu search, enter: download the restore wizard, which has many websites. You can click to have a look. Second, retrieve the mistakenly deleted document, empty the recycle bin: 1, click "Start-Run", and then enter the regedit (open the registry). 2. Expand: hekey-local-Machime/software/Microsoft/Windows/CurrentVersion/Explorer/Desktop/namespace in turn, click "New" in the left margin and select "Primary Key". Name it "645ffo 40-5081-1b-9f08-00aa002f954e" and then set the key value of the "default" key on the right to "recycle bin", and then exit the registry. Not bad. 3. Restart the computer. As long as your computer is not running disk defragmentation. The system is in good condition. Files can be retrieved at any time.

Question 4: How to retrieve the files deleted yesterday? Do you have the latest version of 360 Security Guard? There is a "file recovery" function, which can help you retrieve the deleted files. Because it is only a QQ number saved in the txt document, it is easy to retrieve. As long as you remember that you once put that txt file in that location on your computer. Download address of the latest version of 360 Security Guard: down.360safe/instbeta.exe

Question 5: How to recover the large files deleted by mistake? I have used all the software recommended above. According to experience, it is almost impossible for you to fully recover. Because the 7 G file is very large and has a lot of text, if you write in this partition, there should be no possibility of recovery, but it is still possible to retrieve a single file.

It is more realistic to try to retrieve archived files. These softwares are only effective if the file size is relatively small and the partition is not overwritten.

Question 6: The files on the desktop have been deleted, and the recycle bin has been emptied. How to retrieve them? Try:

In many cases, once we delete a file or folder by mistake (here refers to the permanent deletion on the disk), we usually use special tools and software to retrieve it. In fact, the following method may be simpler:

1, click "Start"-"Run", and then enter regedit (open the registry);

2. Expand HKEY _ Local _ Machine/Software/Microsoft /Windows/ Current Version/Explorer/Desktop/Namespace in the Registry Editor;

3. Right-click Namespace and select New-Project, and name it "645ffo40-5081-kloc-01b-9f08-00aa002f954e";

4. Select this item again, set the key value of "Default" on the right to "Recycle Bin", and then exit the registry;

5. Then restart the computer. Open the Explorer and see that all the deleted files or folders are in the Recycle Bin.

Need to be reminded: the first advantage of this method is that after you delete the file or folder, you don't defragment the disk, the system is in good condition and the file can be retrieved at any time.

You can also try downloading data recovery software.

Question 7: If I accidentally delete an important folder, how can I get it back? If only the files deleted in recent days, and a large number of files are not stored in this hard disk partition where the files were deleted, data recovery is still very convenient.

360 security guards have their own file recovery function, which is convenient to use and has good recovery effect. It is very practical to use it to recover the data in the hard disk.

Take "360 Security Guard Pilot Edition" as an example. Open 360 Security Guard and click "More" in the lower right corner of 360 Security Guard.

Then click "File Recovery" on the left. The first time you use it, this plug-in function will be automatically added.

After loading, it is the operation interface of "360 file recovery". Select the hard disk partition where the deleted files are located, and then click "Start Scan" to scan the files in recent years.

Then search according to the classification on the left, and then sort by "creation time" or "last visit", and basically you can find the recently deleted files. Because some files are seriously damaged, the recoverability of these files marked as "critical" is relatively poor. You can pay attention to the "highly recoverable" part of the file.

After finding the file to be restored, click "Restore Selected File" in the lower right corner, select the temporary storage address of the file to be restored, and then click OK.

The above picture shows the effect of 360 file recovery function to restore a picture.

Of course, you can also try EasyRecovery software, which has quite good data recovery ability.

Question 8: I accidentally deleted a useful file. How can I get it back? Now all free antivirus software has data recovery function. Any next one.

After deleting a file by mistake, as long as you don't write the file to the deleted partition, there is still a chance to recover the deleted file by mistake. But I can't guarantee a full recovery. At present, there are many softwares to recover data, such as EasyRecovery Pro and FinalDataEnterprise20. Here I recommend the software EasyRecovery Pro. At the same time, I will introduce the steps of data recovery under WINDOWS and DOS. I hope it helps you.

In the daily use of computers, everyone may have encountered some troublesome situations, such as deleting data by mistake, formatting hard disk partitions by mistake, and even deleting hard disk partitions by mistake. So once these situations occur, how to recover the mistakenly deleted data?

Recovering data in Windows

If the user just deleted some files by mistake, such as Word files and text files, or just formatted the non-system partition by mistake, and Windows is still running normally, then the software EasyRecovery Pro can be used to recover the data.

Tip: When installing this software, you need to pay attention to: If you need to retrieve the files deleted by mistake on disk C, it is best not to install EasyRecovery Pro on disk C, otherwise it will affect the file system of disk C and is not conducive to data recovery.

1. Recover files deleted by mistake.

After starting EasyRecovery Pro 6.0, click the "Data Recovery" button on the left side of the main interface, and then click the "Deleted Recovery" button in the right window.

After a short scan, the program asks the user to select the partition where the mistakenly deleted file is located, and then enter the file name and type of the file to be recovered in the "File Filter" column on the right. The default program is to find all deleted files, so that you can find all deleted files, generally using the default value. Note: If the file has been deleted for a long time, it is recommended to select the check box before "Full Scan", so that the recovery will be more successful.

After clicking "Next", the program starts scanning partitions, and finally a file list window pops up. This window is similar to "Resource Manager". Users only need to find the files to be restored in this list and then tick "√".

Tip: After EasyRecovery Pro finds the deleted file, the file name in the file list may be different from the original file name. So be patient when looking for files that need to be restored. You can judge whether files need to be restored according to the file name and file type. In addition, after selecting a file, you can click the "View File" button to view the contents of the selected file, which is very useful for finding text files.

After selecting the files to be restored, click the "Next" button, and the program will ask you to select a directory to store the restored files. Note that, for the safety of recovery, it is recommended to store the recovery data in other partitions (for example, if the file to be recovered is on drive D, you can save the found file to drive E). Click the Browse button after Restore to Local Drive, and select the destination directory in the pop-up window.

Tip: After EasyRecovery Pro finds the deleted file, the file name in the file list may be different from the original file name. So be patient when looking for files that need to be restored. You can judge whether files need to be restored according to the file name and file type. In addition, after selecting a file, you can click the "View File" button to view the contents of the selected file, which is very useful for finding text files.

After selecting the directory where the recovered files are stored, click Next, and the program will restore the selected files to the set folder.

2. Recover data on incorrectly formatted partitions.

After starting the program, click the "Data Recovery" button, and then click the "Format Recovery" button in the right window. At this point, the program requires the user to select the partition that needs to recover the data.

Tip: If not only the partition is formatted, but also the partition format of the partition is changed (for example, from NTFS format to FAT3 ... >; & gt

Question 9: How to retrieve the word document deleted by mistake? Windows system and many softwares will produce temporary files when they work, and most of these temporary files are saved in Windows temporary folders. However, Word will not store the temporary files of its runtime in the Windows temporary folder, but in the folder it specifies. For example, in WindowsXP, the default temporary folder specified by Word is "C \ \ DocumentsSandSettings \ \ User Name \ Application Data \ Microsoft \ Word" folder. If you don't know the location of the Word temporary folder in the system, you can get it in the following ways:

1. On the Tools menu in Word, click Options.

2. Click the "File Location" tab, and the path after "Automatically Recover Files" is the temporary folder of Word.

3. If the complete path is not displayed here, click the "Modify" button, and then view the complete path information through the "Find" box.

So, what's the practical significance of knowing the location of the Word temporary folder? When editing a Word document, I suddenly encountered failures such as power failure and crash. If there are unsaved work results, then after restarting the computer, look for them in the temporary folder of Word. Maybe the temporary files stored in it have these unsaved work results!