What should I do if there is noise in the headphones on the computer?

1. What should I do if the computer headset is noisy?

1

Determine if it is a hardware problem or a system problem.

You can take the earphone to another computer and try another earphone on the computer, because sometimes there is noise because the earphone hole is broken. All hardware problems can be solved by trying these two methods. I can't help you with the hardware problem.

2

Now suppose that headphones can be used on other computers, and other headphones are also a way to deal with noise on your computer.

At this time, we are sure that it is a system reason. Systematic reasons can be divided into the following categories.

1: driving problem;

2: The computer has static electricity, which is generally ignored;

3. There are tools that need to receive information, such as your mobile phone suddenly calling or texting, and some appliances will always need this function;

4: Microphone enhancement.

three

Solutions to hardware problems of computer headphones with noise

If it is a hardware problem, it can only be replaced. I believe it is very simple, needless to say.

four

Solution to the problem of computer earphone noise system

1: There is something wrong with the driver. Just use the next driver wizard to update the driver.

2. The computer has never encountered static electricity and cannot be cracked.

Just keep the computer away from this kind of electrical appliance.

4:YY or the system itself has microphone enhancement function. Many times, we will turn on this function because others say that we talk too little, which will lead to noise.

2. What should I do if the computer headset is noisy?

If there is noise, you can first identify whether it is a computer problem or a headset problem. You can plug the earphone into the mobile phone first and test it. If there is no noise, the computer audio graphics card or audio output is damaged. If there is noise, you can try changing the earphone, which can explain that it is a computer or earphone problem. Replace it.

Reason:

1, the computer is not cleaned in time, the system piles up too much garbage, and the computer responds slowly;

2. The earphone is damaged;

3, the computer has static electricity, which is also the main reason;

4. The microphone is in a reinforced state;

5. There is a magnetic field source or sound wave source near the earphone;

6. Abnormal sound occurs during voice call;

7. If the microphone is not turned on, the volume of the earphone will be very small, and there will be a lot of current noise when the microphone is turned on;

8. There is something wrong with the headphone jack.

3. Desktop computer, with headphones plugged in, has sizzling current noise.

1, the wire inside the earphone is loose, and there will be a current sound when the earphone wire is slightly moved. If you are a small electrician, you can weld the wire again yourself.

2. Iron foam or other sundries stick to the magnet on the earphone speaker and are pressed between the magnet and the speaker diaphragm, so that the diaphragm contacts the magnet and makes a noise. The only problem is to replace the speaker.

3. The horn diaphragm is deformed due to air pressure, which causes the horn diaphragm to touch the magnet and make noise. It is suggested that the slightly deformed diaphragm can be repaired by gently inhaling through the mouth and blowing into the noisy speaker.

Second, the computer sound card problem.

1. Generally, headphones are plugged into the front of the chassis. If it is a computer problem, it is recommended to try plugging it in the back of the chassis. Most of the headphones caused by computer problems are noisy, which is caused by damaged front earphone interface or loose inside the chassis.

2. If there is noise in the front and rear earphone holes, there is something wrong with the sound card. Replace the sound card or send it for repair.

4. Why do computer headphones have noise? What if there is noise?

So a computer without sound feels very weak after using it.

And many people will tune the audio manager because I have nothing to do recently. Then there is no sound or noise in the earphone.

We mainly analyze what to do if there is noise in computer headphones. 1 Determine whether it is a hardware problem or a system problem. You can try your headphones on another computer, or you can try other headphones on the computer, because sometimes there will be noise when the earphone hole is broken. All hardware problems can be solved by trying these two methods.

I can't help you with the hardware problem. Now, headphones can be used on other computers, and other headphones are also a way to deal with noise on your computer.

At this time, we are sure that it is a system reason. System causes can be divided into the following categories: 1: driving problems; 2: The computer has static electricity, which is generally ignored; 3. There are tools that need to receive information, such as your mobile phone suddenly calling or texting, and some appliances will always need this function; 4: Microphone enhancement.

3. The solution to the hardware problem of computer headset noise can only be changed if it is a hardware problem. I believe it's simple. 4. Solution to the noise problem of computer headset system 1: If there is something wrong with the driver, just use the next driver wizard to update the driver. 2. The computer has never encountered static electricity and cannot be cracked.

Just keep the computer away from this kind of electrical appliance. 4.YY or the system itself has microphone enhancement function. Many times, we turn on this function because others say that we talk too little, which leads to noise. The above is about why there is noise in computer headphones. What should I do if there is noise in the computer headset?

I hope the above methods can help you solve the problem of no noise in computer headphones.

5. Why is there noise when the computer is plugged in with headphones?

Sound card (integrated with motherboard) hardware is not good, or the quality is not enough, mainly in filtering, sound processing and other issues!

If it is inserted in front, it will be normal, because the wires and interfaces can be cut!

If it is a brand-name machine, find the seller or after-sales service.

Compatible computers, especially X-planes, are generally difficult to handle.

Not that other machines don't. It can only be said that this phenomenon is rare, especially if you use non-hi-fi headphones or a good box. Even if you hear a slight noise, the seller will tell you that this cheap product (motherboard, chassis, sound card, earphone, speaker) is like this (probably like this)! But you must let the seller handle it for you, either to prove that your speakers or headphones are not good, or to change your motherboard or chassis!

Stereo can only work with power amplifier, whether it is active or passive. Once the stereo is connected, the noise will be amplified. Do you think it will affect?

6. The computer is plugged with headphones, which makes a lot of noise.

You can try putting headphones on another computer to see what it is.

If the noise is still high, there may be the following reasons:

1. Check whether the earphone sensitivity is too high. There may be a small audio voltage to push it.

2. Check whether the shielded wire of the earphone falls off or there is no shielded wire at all. Shielded wires should be completely wrapped with braided tape, and ordinary single-core grounding wires should not be used instead.

Here are some solutions:

1. Replace headphones with low sensitivity and high impedance.

2. Replace the signal wire of the earphone with the signal wire woven by shielding wire mesh.

3. Connect a ceramic capacitor 683 or 104 between the signal wire and the ground wire of the left and right channels for friends who know electronics and welding.

4. Replace slightly better brand headphones.

If there is no noise when the headphones are placed on another computer, there is something wrong with the sound card or socket, and the sound card must be repaired or replaced.

7. Why does it sound noisy when my computer is plugged in with headphones?

The detailed explanation is as follows: 1.

Your microphone, whether the mix is up to the maximum. Solution: Microphone, the mixing volume can be increased to 80% to 90%.

2。 Whether your microphone is in the enhanced state.

Solution: Remove the microphone. Because some sound cards don't support it.

3。 Is there a problem with the connection between your microphone and the computer host?

Solution: Disconnect the microphone from the computer host, then reconnect it correctly, and check for poor contact. 4。

Do you use speakers? Solution: Use headphones.

You must use the speaker, and be careful not to aim the speaker at the microphone. The conditions of your computer room need to be spacious and good. 5。

See if there is anything with magnetic field and sound wave around you. Solution: Take away electrical appliances with magnetic fields (such as mobile phones and fans).

6。 Is there something wrong with your sound card or microphone?

Solution: Record a segment in the internal playback state. 7。

Is there any leakage on your computer motherboard? Solution: use a wire to connect one end of the metal strip at both ends of the wire to the outside of the computer host, which is not the key metal part.

Head down. (Special note: Never choose the wiring in a key part other than the computer host, and pay attention to the safety of you and your computer) 8.

Whether your computer host accessories are loose or improperly installed. Solution: Listen to your computer host to see if there is any abnormality (such as the fan is too loud and not running smoothly). ) and ask professionals to clean or debug for you according to the situation.

9。 Is your MSN or other chat program installed incorrectly?

Or the download is incomplete. Solution: If you are downloading, the data is lost and the file is incomplete due to network or other reasons.

Will cause discomfort in use. In addition, improper installation of plug-ins can also lead to exceptions.

I suggest you reinstall it according to my method: after you turn off your computer, uninstall it in the control panel and download and install it again. 10。

If there is something wrong with your computer (for example, you need to clean up junk files, remove viruses and trojans. ) There will be abnormal noise.

Network congestion and slow network speed can also lead to abnormal noise. Solution: Do a good job in computer maintenance.

It should be easy to hear the voice of insufficient network speed. Novice park theme area can ask online management to help you judge.

8. Computer headphones are noisy. Very noisy. How to solve it?

Reason:

1, the computer is not cleaned in time, there is too much garbage in the accumulation system, and the computer is slow to respond.

2. The earphone is damaged.

3. The computer has static electricity, which is also the main reason.

4. The microphone is in a reinforced state.

5. There is a magnetic field source or sound wave source near the earphone.

6. Abnormal sound occurs during voice call.

7. If you don't turn on the microphone, the volume of the earphone will be very low. If the microphone is turned on, zd will have a lot of current noise.

8. There is something wrong with the headphone jack.

Solution:

1, cleaning up computer system garbage and antivirus.

2. Comparing the earphone with other earphone planes or computers, it is easy to judge whether it is a computer problem or an earphone problem, and replace the earphone if necessary.

3. Touch the iron part of the computer case with your hand. If the current noise disappears, you can connect a copper wire, one end of which is connected to the screw behind the computer and the other end is grounded, which can eliminate the current noise and has excellent effect.

4. If the microphone is enhanced, please turn off the microphone enhancement, because some sound cards do not support it.

5. Remove electrical appliances with a magnetic field.

6. If the voice is abnormal only when chatting with friends, it will be normal in the chat hall.

7. If the microphone is not turned on, the volume of the earphone will be very low, and there will be a lot of current noise when the microphone is turned on. The solution to this situation is: control panel-sound and audio equipment-voice-recording-volume, click it and turn the microphone slider to the maximum.

8. There are earphones on the front and back of the host. If you look at it from another port, the effect in the back is generally better than that in the front.

9. What should I do if there is noise in the desktop computer headset?

1. Why is the computer headset noisy?

There are several reasons for the noise of computer headphones. As long as the corresponding solutions are taken to eliminate them one by one, it is easy to find the real reason.

The reasons why computer headphones make noise are:

1, the computer is not cleaned in time, there is too much garbage in the accumulation system, and the computer reflects slowly;

2. The earphone is damaged;

3, the computer has static electricity, which is also the main reason;

4. The microphone is in a reinforced state;

5. There is a magnetic field source or sound wave source near the earphone;

6. Abnormal sound occurs during voice call;

7. If the microphone is not turned on, the volume of the earphone will be very small, and there will be a lot of current noise when the microphone is turned on; 8. There is something wrong with the headphone jack. The above eight reasons are the main reasons for the noise of brain headphones. In addition, there may be something wrong with the earphone cable, or there are sundries in the earphone, which will lead to noise in the earphone. But don't worry about the noise in the computer headset. The solution is simple, and the general situation can be solved soon.

Second, what should I do if the computer headset is noisy?

If the computer headset is noisy, the first choice is to determine what causes the headset to be noisy, and then take corresponding solutions to eliminate the headset noise. The general solution is as follows:

1, cleaning up computer system garbage and antivirus;

2. Comparing the earphone with other earphones or computers, it is easy to judge whether it is a computer problem or an earphone problem, and replace the earphone if necessary;

3. Touch the iron part of the computer case with your hand. If the current noise disappears, you can connect a copper wire, one end of which is connected to the screw behind the computer and the other end is grounded, which can eliminate the current noise and has excellent effect.

4. If the microphone is in the enhanced state, turn off the microphone enhancement, because some sound cards do not support it;

5. Remove electrical appliances with magnetic field;

6. If the voice is abnormal only when chatting with friends, it will be normal in the chat hall;

7. If the microphone is not turned on, the volume of the earphone will be very low, and there will be a lot of current noise when the microphone is turned on. The solution to this situation is: control panel-sound and audio equipment-voice-recording-volume, click it and turn the microphone slider to the maximum.

8. There are earphones on the front and back of the host. If you look at it from another port, the effect in the back is generally better than that in the front.

10. What's the noise when the computer headphones are plugged in?

You should turn on Mike Feng's voice. You can right-click on the speaker-turn on the volume control-and check the mute under the microphone to try.

If it doesn't work, it should be a bad contact between the earphone and the computer audio jack. You can clean the contacts. If it really doesn't work, replace it with a new one.

1. Headphones.

1. The cable in the earphone is loose, and there will be a current sound when the earphone cable is slightly moved. If you are a small electrician, you can weld the wire again yourself. No, you'd better fix it.

2. Iron foam or other sundries stick to the magnet on the earphone speaker and are pressed between the magnet and the speaker diaphragm, causing the diaphragm to contact with the magnet and generate noise. The only problem is to replace the speaker.

3. The air pressure distorts the horn diaphragm, causing the horn diaphragm to make noise when it touches the magnet. It is suggested that the slightly deformed diaphragm can be repaired by gently inhaling through the mouth and blowing into the noisy speaker.

2. Computer problems.

1. Generally, headphones are plugged into the front of the chassis. If it is a computer problem, it is recommended to try plugging it in the back of the chassis. Most of the headphones caused by computer problems are noisy, which is caused by damaged front earphone interface or loose wiring inside the chassis.

2. If there is noise in the front and rear earphone holes, there is something wrong with the sound card. Replace the sound card or send it for repair.