Nokia E63 always reminds me when downloading and installing software: the software is damaged.

Who told you that difficult cases can be turned into bricks! Nonsense without foundation!

Only when brushing the machine, the wrong operation will lead to system problems, unable to start, and so on. And become a brick!

The hard grid machine only needs to make a good backup in the early stage. Hard grid machine is actually equivalent to reloading Saipan system, which is not a difficult operation!

First of all, the following answers are my original edward_ml, please don't copy the answers, thank you for your cooperation!

There are many reasons for software damage:

One:

It is suggested to change the memory card first and try to install the software. Will it prompt injury?

If the prompt is damaged, it is a problem with the mobile phone system. Need a hard grid machine, see the picture below!

If the installation is normal, it means that your old memory card has problems and needs to be replaced.

Two:

You download a mobile QQ from your computer, and then copy it to your mobile phone for installation.

If the installation is normal, it means that the data of the software installation package was destroyed when you downloaded it before. Download from another website!

If the message is still damaged, there is something wrong with your memory card. You need to change the memory card, so it is recommended to use a hard grid machine, because you still have a problem-automatic shutdown. So no matter whether your memory card is good or bad, you must format your phone hard once!

Hard grid mobile phone is actually to restore the mobile phone system. Will erase all mobile phone data, you need to back up the data of mobile phone and memory card to computer or USB flash drive and other storage media in advance!

There is only one way to solve this automatic shutdown:

Hard format mobile phone (hard grid machine is a panacea, remember to back up the data in advance)

It is suggested that the hard grid machine can solve the use problems of most Nokia smartphones.

Hard mesh machine:

Press and hold the call key, No.3 key and * key at the same time, and then press power on. Don't let go, the phone has already started formatting. Press one button at a time, but don't release it. When the mobile phone is turned on automatically, it is required to enter the time. This is the end of the grid.

This formatting is thorough, and there will be no problem of invalid formatting.

Note: when formatting, ensure sufficient power, and generally run at full power. Don't try to turn off the phone or plug in the charger on the way to the lattice machine.

After the grid machine, the software originally installed on the expansion card will be affected, so in general, the important data of the expansion card will be backed up.

Then format it. After the phone is formatted, it will reinstall all the programs saved in E disk.

Preparation before lattice machine and recovery after lattice machine.

1. Backup Address Book-Open Address Book-Options-Mark All-Copy to Memory Card.

2, hard format mobile phone-see the top operation method.

3. Restore Address Book-Open Address Book-Options-Copy-From Memory Card

4. Use a card reader or mobile phone data cable to back up the files that need to be backed up to the memory card on the computer.

5. Open the memory card icon or file management icon on the mobile phone, click the left soft key, and then click Format Memory Card.

6. Adjust the phone settings. Install software, etc

In short, remember: back up the data first, then hard format the phone, then open the memory card or file management icon on the phone, click the left soft key, and then format the memory card (remember to back up the data to the computer in advance).

As for your SMS backup, it may be a bit difficult. Can I try to install love messages successfully? After installation, click Tools, click SMS Backup, and the grid machine can be restored with love SMS!