What about Apple's screen lock?

Question 1: What if the screen of Apple's mobile phone is locked? This problem will arise when I enter the wrong password six times in five minutes. There is a prompt on it, asking you to connect your computer ITunes and use ITunes to restore your mobile phone. The steps are as follows:

1, turn off the phone. If the battery of the mobile phone is invalid, you need to press and hold the home button and the power button at the same time, and the mobile phone will automatically turn off after 10 seconds.

2. Start ITunes on the computer client, connect the USB interface of the data cable to the computer, then press and hold the home button of the mobile phone, and insert the small end of the data cable into the mobile phone. The home button must be pressed all the time and cannot be released.

3. When you see the prompt to connect to itunes on the phone screen, please release the Home button.

4. The computer client's itunes will pop up a window showing "itunes has detected that an iphone is in recovery mode. ..................................................................................................................................................

5. Then you can use itunes to restore your phone. After the recovery is successful, you can re-synchronize the backup data, such as address book, SMS and other settings.

I hope the answer can help you!

Question 2: What about Apple's 5s screen lock?

& gt0 1

We first open the "Settings" application on Apple's 5s home screen.

& gt02

Find the General option in the settings list, click Open,

& gt03

Then find the "Touch ID and Password" option in the general list and click Enter.

& gt04

Click the "Touch ID" option in the password setting interface.

& gt05

In the touch ID setting interface, please unlock the iPhone and open the App Store, and then click the "Add Fingerprint" option.

& gt06

Next, the system prompts us to put our finger on the Home button and start fingerprint recording.

& gt07

When we put our finger on the Home button, we will see an animation showing the recorded fingerprints. When setting the fingerprint record, touch it and then remove your finger. It should be noted that please keep your fingers clean and in the correct touch position.

& gt08

After recording the fingerprint information of the finger, it is necessary to set the posture of pressing the Home button of the finger to unlock it. Maybe everyone touches the Home button in a different way, so use the way you are used to.

& gt09

Next, just press the Home button as usual and pay attention to the direction and angle of finger touch, just like recording fingerprints before.

& gt 10

Click the "Continue" button after setting.

& gt 1 1

Finally, you can see our new fingerprint, which can be used to unlock the screen, or you can buy applications in the App Store.

& gt 12

If you want to cover other fingers, just follow the above method.

Question: How to unlock the screen of iphone > General > Auto Lock > Select Permanent ~ The screen will not be locked unless the screen lock button is pressed ~

Question 4: What should I do if I forget my Apple phone lock screen password and ID password? If you forget the screen lock password, you can only recover it forcibly, but all the data is gone after recovery.

The first method: normally enter DFU for recovery.

This recovery method is the most commonly used method to recover iphone firmware in general unlocking tutorials.

1. Connect the iphone to the computer and turn it off.

2. Press and hold the On/Off button and the Home button at the same time.

3. When you see the white Apple logo, please release the On/Off key and keep pressing the home button.

4. Open iTunes and wait for it to prompt you to resume mode, then press and hold the shift key on the keyboard, click "Resume" and select the corresponding firmware to resume.

The second method: the black screen enters DFU for recovery.

1. Connect the iphone to the computer with a USB cable, and then you will hear the prompt that the computer is connected successfully.

2. Please turn off the iphone first, and then the user will hear the prompt that the computer connection is unsuccessful.

3. Please press and hold the ON/OFF key and the home key at the same time until the first 10 second. Please release the on/off key immediately and hold down the home key.

4. At this time, iTunes will automatically start, prompting you to resume mode (iphone will always be black). Then the user can press and hold the shift key on the keyboard, click "Restore" and select the corresponding firmware to restore.

If you forget the ID password, you can reset it. The reset method is as follows:

1. Open a browser, enter appleid.apple/,, and click the option to manage your Apple ID.

2. Enter the account and password, and then click Login.

3. Select password and account to enter safely.

4. Choose to send the security reset information to another email address filled in the rescue email address at that time.

5. Log in to the rescue mailbox, which may be in the trash can. Select Reset Questions and Answers to change all security information.

6. After managing the security setting options, set the questions and answers.

7. You can also change the rescue mailbox. After entering the date of birth, click Save to complete the changes.

Question 5: so hard to forget Apple's 5 or 5s screen lock password? There are several solutions to forget the screen lock password, as follows:

Option 1: brush machine

1. Install itunes on your computer and open iTunes after installation;

2. Connect the iphone to the computer with a data cable (the iphone can be found, but the connection cannot be established);

3. Press the power button and the home button of the iphone at the same time until the software installation status of the iphone appears;

4. Reinitialize the iphone with the restore function in itunes (note: the original data in the iphone will be lost);

5. After verifying and reinstalling the software, you can reactivate the iphone.

Option 2: Delete Password

1. Install itools in the computer and open it after installation;

2. connect iphone with itools

3. Find "File Management" and enter the /private/var/keychains/ directory. Rename keychain-2.db, such as keychain-2.bak.db, or delete it directly. Then press and hold the power button until the red shutdown slider appears.

4. Turn it off and then on.

Option 3: Find Apple's local repair shop and ask professional technicians to help solve it.

If you forget your ID password, you can reset it as follows:

1. Use computer: appleid.apple/, open Apple's Apple ID management page, and click the "Reset Password" link in the page.

2. Next, enter the Apple ID account name, and then click Next to continue.

3. Select the method to retrieve the password by email, and then click the Next button.

4. Then the system prompts that an email to retrieve the password has been sent.

Next, please open your email, and you will see an email from Apple asking to reset your password. If not, please check whether it is in the trash can of the mailbox.

6. After opening the email, click the "Reset Now" link in the email.

7. Finally, the password reset page will open. According to the password requirements of Apple ID, enter the new password twice and click the "Reset Password" button.

Question 6: What should I do if I forget the screen lock password of my Apple phone? Solution: If the user has escaped from prison, delete the phone directory/private/var/keychains/keychains-2.db file and restart the iphone. If you don't escape from prison, you can only brush the computer. It's best to back up all the software and other resources before brushing the computer, otherwise it will be gone after brushing the computer.

Brush machine solution

Turn off iPhone and enter DFU mode to upgrade the system.

DFU mode input method:

1. Turn off the iPhone.

2. Connect iPhone and computer with data cable, and open iTunes.

3. Press and hold the power button of iPhone.

4. When the Apple logo appears, do not release the power button, and press and hold the HOME button on the iPhone for about 10 second.

5. After the iPhone goes black, continue to hold down the HOME button and release the power button until iTunes.

Prompt "You have a device in recovery mode". At this point, you can release the HOME button and the iPhone screen will go blank.

After completing the above steps, I entered DFU mode and used iTunes to import firmware for system recovery (upgrade) (my previous version was 5.0. 1, but I only used 5. 1).

Click "confirm"

Then, hold down the Shift key of the keyboard and click "Restore" with the mouse to open the dialog box.

Waiting for iTunes to restore the firmware, the whole process will take about a few minutes.

After the recovery is completed, iTunes will prompt "iPhone has been restored to factory settings and will be restarted soon".

Restore the firmware (flash) and use iTunes to restore the backup data.

The upgrade of iPhone system is completed, the welcome interface appears, and the brushing is completed.

IOS 5.0 1 first activation steps:

1. Enable location services, and then click Next.

2. Select a WIFI network (wireless local area network), and then click Next.

3. Set it up as a new iPhone, and then click Next.

4. Log in to Apple ID (you can skip it) and click Next.

5. Click on the terms of the agreement.

6. Do not enable diagnosis and dosage, and click Next.

7. Click Start Using iPhone to complete the first activation.

Remarks: I only provide the above methods to help friends with the same problems. If your mobile phone is illegally obtained, I still suggest that you return it to the owner.

Use iphone screen lock password cracking tool

Download address: jb5 1/softs/76662.

1. Open the software and click Step.

1: Turn on the phone ... Select the phone model to unlock in the small black triangle below.

2. After selecting Start, a dialog box will pop up. Click OK to select the ios firmware to be cracked. The firmware should be the same as that installed in the mobile phone.

3. Did you see a once familiar dialog box pop up at this time? Just like when you escaped from prison. Haha, that's it. Needless to say now. Just like prison break, first turn off the phone, press the power button, press three bills, etc., then enter that DFU mode, and then start automatically calculating the password.

4. At this time, there will be many incomprehensible numbers on the screen of the mobile phone, which is to calculate the password and calculate the password displayed on the computer.

After many tests, I can completely unlock the digital screen lock password. (Note: Only numeric passwords can be cracked, not alphabetic and character passwords)

In order to convince everyone that it is true, now I will unlock it again and send a picture!

...& gt& gt

Question 7: What should I do if I forget the iphone lock screen password? Did you escape from prison? If you break out of prison, things will be easy.

Open itunes for networked computers that have not escaped from prison, and click "Restore" directly (provided that the data in your mobile phone is backed up). After recovery, choose to set it as a new IPHONE to synchronize the data to the mobile phone.

Jailbreak to the var/mobile/library/preference directory.

Open. Apple.springboard.plist, find the line below SBParentalControlsPIN, which is your restricted password.

After jailbreaking, you can return to the state of not jailbreaking, just like before jailbreaking! I hope my answer is helpful to you, thank you!

Question 8: What happened when Apple locked the screen for tens of thousands of minutes? Apple's mobile phone display has stopped, try again in tens of thousands of minutes. Solution:

You need to enter DFU forced refresh mode. The full name of DFU is Development FirmwareUpgrade, which actually refers to the mandatory upgrade mode of iPhone firmware.

Here's how to enter DFU mode:

Method 1: normal recovery.

1. Connect the iPhone to the computer and turn it off.

2. Press and hold the On/Off button and the Home button at the same time.

3. When you see the white Apple logo, please release the On/Off key and continue to press and hold the home button.

4. Open the prompt of iTunes waiting for recovery mode, then press and hold the shift key on the keyboard, click "Restore" and select the corresponding firmware recovery.

Method 2: Black screen recovery

1. Connect the iPhone to the computer with a USB cable, and then you will hear the prompt that the computer is connected successfully.

2. Please turn off the iPhone first, and then you will hear the prompt that the computer connection is unsuccessful.

3. Please press and hold the ON/OFF key and the home key at the same time until the first 10 second. Please release the on/off key immediately and hold down the home key.

4. At this time, iTunes will automatically start and prompt for recovery mode (iPhone will always be black). Then you can press and hold the shift key on the keyboard, click "Restore" and select the corresponding firmware to restore.

Question 9: What should I do if the lock key of Apple mobile phone doesn't work well? No matter how hard I press it, it's no use. Apple store, of course. Don't go to ordinary mobile phone stores. The parts do not belong to Apple and are in danger of being disassembled.