How to set the watch alarm?

The alarm setting method is as follows:

1. In alarm mode, use the d button to select the alarm to be set until its alarm screen appears.

2. Select the alarm clock "WT" to be set.

3. Select the alarm "ALM" to be input, and press the c button to select the hour number or fraction number (flashing).

4. After selecting the item to be set, use the D(+) button and the B(-) button to change the setting value in the blink. You can set an alarm clock. Press the "light" button, and the screen will show on or off. Just choose Close to turn it off.

Related introduction:

Electronic watch: A watch containing electronic circuits. According to the different vibration system or oscillator used, it can be divided into balance wheel electronic watch, tuning fork watch and quartz watch. Also called electronic watch. When the temperature of electronic watch is 25 ~ 28℃, the time error of one day and night is less than one second, and when the temperature is below 0℃ or above 50℃, it is two seconds slower every day and night.

At the same time, when the temperature is as high as 60℃, the LCD panel will turn black, and when the temperature drops below 0℃, the LCD panel will lose its display function. Therefore, in winter, the electronic watch can only be worn on the wrist, relying on the constant temperature of the human body to maintain its normal timing. In addition, too high and too low temperature will also cause battery leakage and movement corrosion.