After setting EGPRS on Samsung D508, does it still display "G" when surfing the Internet?

Samsung D508 function settings collection

1. About information.

1. Short message settings. It should be said that few people don't know about the settings of short messages. In this regard, the most asked question is how to save short messages in the mobile phone. By default, Samsung mobile phones (in fact, most mobile phones are like this) store text messages in the SIM card when they are received. When the memory is full, new messages will be automatically stored in the phone. If you want to save the information in the mobile phone, you can do this: View information - Move - OK, then you can transfer the information stored in the card (or mobile phone) to the mobile phone (or card).

2. MMS settings: The MMS of Xiao D’s A3, A6 and D2 versions should be automatically set. If not, you can set it with the following method:

In standby Enter

#*2527# in the status, the phone will display GPRS 3, enter #*2527# four times in a row, it will display switching set to class10

*2767*927# WAP automatic reset

*2767*86927# GPRS automatic setting shows china wap setting

*2767*86667# MMS automatic setting

B7 and D4 versions of Ma Xing MMS needs to be set manually. If automatic setting does not work in other versions, manual setting is also required. The method is as follows:

Menu-Message-Multimedia Message-Settings:

Send settings : High priority, sending delay: Immediately

Receive settings: All set to automatic.

Reject anonymous information, reject ads, and allow reporting. Do not check these three places.

Then multimedia information settings:

Server settings: China Mobile

Mode Name: China Mobile

Server URL: mmsc.monternet.com

Proxy server: Valid

GPRS settings: IPd address is set to 10.0.0.172, port 80, Access point name: CMWAP (uppercase) Username: empty, Password: empty

Version: 1.0 (100KB)

3. Email settings: First of all, I need to tell everyone The thing is, whether you receive or send emails, you are charged according to the GPRS flow

If you don't worry about the money and still want to use it, please set it up as follows:

First enter on standby *2767*86email# (EMAIL is the number key corresponding to each letter)

After entering, press function-5.3.6.3.2 in standby

Enter account settings:

Account name: Sina?SOHU?163? Just fill in whatever you want!

In use: Tick, commonly used accounts are ticked by default

User name : Customize your name

Email address: Your email address

Reply address: Frequently used accounts must fill in the reply address! Others can be left blank

The key is Fill in the EMAIL address

SMTP and POP3 server

The ports are 25 and 110 respectively

Then enter your own ID and password!

About~SMTP POP3 server address

163: smtp.163.com

pop3.163.com

sina: smtp.sina.com.cn

pop3.sina.com.cn

VIP sina: smtp.vip.sina.com.cn

pop3.vip.sina.com.cn

126: smtp.126.com

pop3.126.com

2. About photography

D508 uses a 1.3 million pixel built-in Camera, but many netizens reported that it does not have the effect of 300,000 pixels. This may be because the settings are not correct. To make the photos taken by D508 fully reflect the effect of 1.3 million pixels, the following settings must be made:

Enter Camera - Photo - Settings, select 1280*1024 in Photo Size, select Super Fine in Quality, and select ISO automatic. It should be noted that when the photo size is 1280*1024, there is no digital zoom function. ISO is used to control the sensitivity of the camera. The higher the value, the faster the camera shutter, and the camera is more sensitive to light. It may be possible when the ISO setting is higher. It causes image distortion. When there is insufficient light at night, it is recommended to reduce the ISO value to improve the image quality.

In photo mode, you can also use the keyboard to configure camera settings:

↑ Flip image vertically

↓ Display mirror

Left key/right key to adjust image brightness

Up key/down key to zoom in or out

1 Switch to video mode

2 Change image size

3 Change image quality

4 Change camera mode

5 Change color tone or apply special effects to photos

6 Reduce image distortion, maximize detail and Improve clarity

7 Choose a decorative frame

8 Set a timer

9 Display photos or photos stored in the My Photos folder

0 Turn on or off the flash

* Display the actual size of the image taken

3. About data connection.

D508 has three data transmission methods, namely data cable, Bluetooth and infrared. Each of these three methods has its own advantages and disadvantages. The data cable is cheaper and the speed is the fastest among the three methods. It is a bit inconvenient to connect with a cable. The transmission speed of Bluetooth is only slightly lower than that of a data cable. The cost is a little more expensive than a data cable, but it is much more convenient to use, and there is no need to download and install special software like a data cable. , so it should be the best way. Infrared is slow and unstable, so it is not recommended. However, some people may also use infrared. The specific settings are also briefly explained:

1. Bluetooth:

Installing the USB Bluetooth module on the computer is very simple. Just install the software in the bonus CD to the computer first, and then insert the Bluetooth module into an empty USB socket on the computer to complete the Bluetooth installation

a. Before installing the Bluetooth module, you need to first Install the driver. Insert the driver CD that comes with the Bluetooth module into the CD drive, and then the installation wizard will lead you to complete the installation step by step;

b. When you start to install the driver, there may be a message that Microsoft has not yet Provide authentication scheme for Bluetooth devices... message, just click "OK" to continue the installation;

c. Halfway through the driver installation, a message that the Bluetooth device cannot be found will appear. At this time, Plug your Bluetooth module into the USB jack on the computer and press "OK";

d. Soon, the computer will automatically detect the Bluetooth module and continue the installation. See After reaching the installation completion screen, press "Finish";

e. After completing the installation of the Bluetooth module driver, you will see the small Bluetooth icon on the desktop and in the tool tray in the lower right corner. Indicates that your computer can now communicate with other Bluetooth devices. However, before you start using it, you still need to do some settings. Double-click the Bluetooth icon with the left mouse button:

⑴. Follow the instructions of the installation wizard and come to the computer name and type dialog box. The computer name part will be automatically filled in. You only need to select according to the computer type. "Desktop" (desktop computer) or "laptop", and then click "Next";

⑵. Next, you will see three types of services, and there are already two types of services in the default value After ticking, just press "Yes" after the file transfer option;

⑶ After the Bluetooth content and dialog box appear, there is no need to change the setting value for the time being, just press "OK". After returning to the Bluetooth service selection, click "Next"

⑷ There is no need to set up other Bluetooth devices, just click "Skip" and then click "Finish".

Let different Bluetooth devices pair with each other

"Pairing" is a Bluetooth term, which means that when two Bluetooth devices are used with each other for the first time, they should make the two Bluetooth devices through simple settings. Devices can find each other and confirm each other one-to-one. Only after confirmation can wireless communication between each other be successfully achieved. Once two Bluetooth devices are paired, you don't have to confirm every time. You can connect whenever you want, which is very convenient.

The method of pairing Bluetooth devices is very simple. Just let a Bluetooth device search for nearby Bluetooth devices. After finding it, set a set of identification codes as a passcode, and then enter the same password on another Bluetooth device. identification code, and the pairing is completed.

2. Data cable:

Install the USB driver, connect the mobile phone and the data cable, and you will be prompted to find new hardware. After installation, enter the device manager and you will see a SAMSUNG USB MODEM, take a look at the port inside, enter EASYSTUDIO2.0 (if it is not installed, install it now, the latest is EA2), open the software, set it to the port number you just saw, and the phone number will be automatically read. Then enter the tool-FILEMANAGER and you can transfer it

How to install the USB driver:

Use the USB driver that comes with the EASYSTUDIO software or download the USB driver separately

The most convenient way is to use the USB driver that comes with the EASYSTUDIO software to install the driver

a. Generally, EASYSTUDIO downloaded from the Internet are compressed files, which are automatically decompressed. After decompression Run Loader.exe

b. Select usb driver in the software installation interface

c. Select installation. The default path does not need to be changed. Install installation

d. Above The three steps can be performed without connecting to the mobile phone. At this time, when the mobile phone is connected, the system will prompt that new hardware has been found

e. The computer will appear to add a new hardware wizard

f. Select " No" Skip the step of searching for hardware online

g. Select "Automatically install software''

h. The search interface will appear and let you choose whether to continue. Click "Continue Anyway"

I. It prompts that the installation is complete. In the device manager, you can find that the modem option already has Samsung. Then set the relevant ports in the EASYSTUDIO software. The installation is complete

3. Infrared:

a. Turn on the infrared of the mobile phone

b. Aim at the infrared port (desktop computers need to connect the infrared adapter first and install the included driver), and the distance is 5CM The internal version is better

c. If you use it for the first time, a pop-up will pop up to install the hardware driver. Just click Next to install it (WINXP, if your notebook does not have a driver, just search online)

d. The wireless link dialog box pops up, select the data that needs to be transferred to the mobile phone, and click Send

e. The mobile phone prompts whether to accept - select Yes, the progress bar starts to change, and the transmission is 100% successful

f. Enter the function - Entertainment to find the incoming data file

g. Currently, infrared can transmit pictures (JPEG, GIF format), ringtones (MMF format or MP3 format), 3GP/ MPG4 video files, MP3 music.