What if Hisense's mobile phone can't be opened?

1. Hisense has a problem with its mobile phone system. What if I can't open it?

Hisense's mobile phone system has a problem. If you can't start the phone, you can restart the phone by restoring the phone system. The specific operation is as follows:

1. Press and hold the power button and volume button to enter the mobile phone security mode, then enter the mobile phone settings from the mobile phone security mode, and find the storage and backup;

2. Enter the storage and backup interface, and select Restore factory settings (note: back up important data in the mobile phone before restoring factory settings) to restore the mobile phone system to the original system. Restart the phone after recovery.

3. If the above methods can't solve the problem, it is recommended to take your mobile phone and warranty card to the designated maintenance point for maintenance or send them back to the original factory for maintenance.

2. What if Hisense's mobile phone can't be opened?

Hello! According to your description, Hisense mobile phone can't be turned on. It is suggested to try the operation according to the following steps: after the mobile phone is fully charged, press and hold the [power key] and [volume+] keys in the off state, enter the recovery mode after 10 second, and use [volume+] and [volume-] to move the cursor. Yes, 【 Home 】 confirm to select Erase Cache Partition >; Yes, [HOME] confirm to restart the system now > Yes, [HOME] confirm this operation, and then restart, and it is finished.

If the problem is still not solved after two wipes, it is recommended to press and hold the [power key] and [volume-] keys 10 second to enter the quick start mode. Connect a PC and brush the official Rom repair system with Flash tools. I hope this can help you! .

3. Hisense mobile phone can't be turned on. How to restore factory settings?

You can enter to restore the dual-clear mobile phone and restart it. Note that this operation will delete all the data of the mobile phone (except the memory card), which is equivalent to restoring the factory settings.

Steps:

1, when the phone is turned off, press and hold the power button 1 sec, and then press and hold the volume plus and volume minus keys at the same time. At this time, press and hold three keys until you enter the English recovery mode!

2. Select Erase Data Factory Reset to confirm, and then select Yes. OK (use the volume up and down keys to select, and use the power key to confirm). Data erasure completion will appear at the bottom of the screen.

3. Then select Erase Cache Partition for confirmation.

4. Select "Restart the system immediately" in the first line to confirm that the phone will restart automatically. After the phone is turned on, it will return to the factory state.

4. Why can't Hisense's mobile phone be recharged?

There may be the following reasons:

1. Do not rule out battery failure.

2. The hardware of the mobile phone system is damaged.

3. Delete the core components of the system by mistake.

The mobile phone won't open. Solution:

1. Check whether the battery is fully charged, charge the mobile phone with the charger for a period of time, and then try to turn it on.

2. Whether it is possible to enter the recovery period. How to enter the recovery: In the power-off state, press and hold the "Volume Increase Key" first, then press and hold the "Power-off Key", and let go to enter the recovery after the boot screen appears. If you can enter the recovery, switch the system and back up the important data under recovery. If you can't succeed, you need to clear all data (address book, SMS, mobile phone application, etc. Will disappear).

3. whether you can enter Fastboot. How to enter Fastboot: When the machine is turned off, press and hold the Mi key, then press and hold the Volume Down key, and then press and hold the Shutdown key, and then release it when the boot screen appears, to enter Fastboot.

4. If this is still the case, it can only be sent for after-sales inspection, and the mobile phone hardware is faulty.