How to do a good job in wireless network coverage of star-rated hotels

How to do a good job in wireless network coverage of star-rated hotels

At present, many hotels want full coverage of wireless network, and many star-rated hotels not only want to have them in the lobby, but also hope that every room can achieve full coverage of wireless network. Nowadays, there are many products covered by wireless network products, but how to build them economically? We hope to communicate more, and at the same time, I also put forward our technical scheme, hoping that * * * can promote the cause of full coverage of wireless networks and build a healthy, safe, environmentally friendly, fast, stable, practical and economical hotel with full coverage of wireless networks. Hotel equipment: At present, most hotels have installed broadband networks, and the lines are basically smooth, all of which are hotel hosts, switches, and then customers' broadband sockets. So we don't need to change the current line. Hotel wireless network full coverage requirements;

Owner's requirements for wireless transformation:

1, project overview

The coverage areas of wireless coverage projects include: hotel rooms and fitness centers.

2. Wireless coverage

Provide the overall solution of hotel wireless network system, and be responsible for a series of related work such as equipment supply, installation, debugging, acceptance, trial operation and maintenance.

3, technical specifications

All products must comply with relevant national regulations and standards.

4. Specific requirements

1) Wireless signals should cover all rooms in the hotel.

2) The wireless network is required to realize the same security policy as the existing network and support the broadband billing management system in the gateway room of the existing network.

3) The wireless network can be connected with the gateway, which conforms to the certification of the network supervision bureau (the room account number corresponds to the guest name, and the online account number in the public area corresponds to the guest name).

4) It is required to be compatible with the existing wired network without affecting the operation of the existing network.

5) Users accessing wireless AP need to be isolated and cannot access each other.

6) The centralized control management mode adopted by the wireless network requires compatibility with the wired network of the hotel.

7) Wireless AP power supply uses switch for remote power supply.

8) The network wiring adopts over five types of shielded network cables.

9) Wireless management software can visually display the AP signal coverage diagram and the AP online status diagram.

10) should be able to support seamless Wi-Fi client roaming.

1 1) All hotel guests and visitors need prepaid/pre-authorization and security authentication mechanisms for wireless access, so they need to communicate with the hotel broadband billing gateway.

12) The wireless controller can manage more than 200 wireless access points.

13) Wireless signal coverage area requires that the signal be ≥-75dBm.

14) wireless AP rate ≥75Mbp.

15) The signal radiation of wireless network shall not exceed 100mw(50mw- 100mw).

16) Wireless network supports VLAN and radius server authentication.

The first step is to install the panel ET953N wireless AP.

1, panel ET953N wireless access point

Mini intelligent AP is a kind of intelligent AP, which has the following characteristics:

1, the wall-mounted design is beautiful and generous, saving space and convenient for users to install;

2. Professional low power consumption, micro-radiation, high signal and efficient data carrying capacity;

3. The interfaces are diversified, with 10/ 100M two adaptive network ports and 1 telephone port to meet different requirements;

4. Efficient wireless rate-75Mbps wireless transceiver rate, based on 802. 1 1n standard, compatible with 802.1b and 802. 1g standard;

5, intelligent service-built-in intelligent omni-directional antenna, which improves the receiving sensitivity;

6, a variety of authentication methods-support WPA, WPA2, personal authentication and enterprise authentication;

7.802. 1Q VLAN-VLAN function makes network services safer and more efficient;

8.POE power supply function -PSE output supports POE.

Step 2: Log in to the ap configuration management server, set the information mode to client mode, and write down the address of the configuration management server.

The third step is to install the AP configuration management server according to the requirements of the hotel. (If the hotel doesn't need so many high-end demands, it doesn't need to centrally manage AP, or it doesn't need to add AP configuration servers.

The fourth step is to replace the switch without POE function in the computer room with a switch with POE function. If you want to save money again, change the power module.

Fifth, adjust the configuration and parameters. Configure the ip address. Configure ap's template room management configuration

Step 6: Install the KOCOD authentication gateway ET350 on the core switch, plus the new generation authentication and billing gateway independently developed by our company. With high-performance engineering-grade hardware, it supports a large number of users' access, and provides a variety of customization functions such as web authentication page customization (brand value transfer, advertising display), diversified authentication methods, flexible account management and so on. Seamless interface with third-party account management systems (such as hotel management system account /CAS single sign-on system, etc.). ) and SMS verification code authentication; Accurate timing billing, time-sharing billing function;

Well, all the work is done. Now let's enjoy the wireless internet.

When you turn on the wireless terminal, it will automatically jump out of the hotel website and enter your room number and account password (given by the front desk hotel). You can apply wireless for free like free WIFI at the airport.