Ask how to knit the collar of an adult sweater from top to bottom.

Knitting calculation method of pullover sweater from top to bottom: sleeve: collar (120 stitches) /6=20 stitches, back: collar (120)-2.5 sleeves (50 stitches) /2=35 stitches, and the rest are precursors. The specific tutorial is as follows:

1. I used four lines to draw the depth of the back collar and five lines to draw the shoulders. Add needles with different colored threads, or you can directly wind the needles on the needles. Take this one of mine as an example, starting with 124 stitches, 55 stitches in the back collar and 69 stitches in the front collar. After knitting the hollow needle, don't break the thread, directly pick 6 stitches on the other color lines in the first row, knit 6 stitches on the back collar after knitting 6 stitches, and hang the stitches. After knitting 7 stitches on the front, knit 6 stitches on other color lines, knit 6 stitches on the back, and knit another stitch on the back collar, which is 6+ 1+6= 13+. By analogy, the shoulder is full of 30 stitches and the back collar is full of 4 stitches, making a total of 34 stitches. Then, the remaining 5 1 of the back collar is changed to the other shoulder, which is also a different color thread to add needles, and the same method is used to add needles.

2. Take another ball of thread and knit the front collar. The needle reduction algorithm of the front collar, 69-55= 14 stitches, so the two sides should be reduced by 7 stitches. Turn the stitch on the other color line to the stitch, and put the shoulder obliquely. The method is the same as that of the back piece, except that the method of putting the stitch on the front collar should be changed, 0.0.0.01.01.0/kloc-0. 0 stands for the place where the shoulder meets the collar obliquely, the last needle is combined with the needle on the collar, four 0s stand for the combination of four rows (front and back), 1 stands for the combination of no needles. Knit a stitch on the collar first, and then knit a stitch on the back (here each row corresponds to a stitch around the collar). Then put 2.2.2.2.3. Because the radian of the collar increases, the needle is directly reversed after the needle is added, and the reverse side does not need to be closed (that is, two rows correspond to one needle of the collar). One side of the front collar is finished, and the rest of the front collar is finished without thread interruption, and then the other half collar is knitted in the same way.

3. After the front collar is knitted, knit the front and rear pieces until the armhole is 6cm long. Pick the needle directly on the sleeve cage, and you can knit the sleeves together without pulling the sleeves!

Extended content

Knitting skills of sweaters

1. If two pieces need to be spliced, the first piece of knitting will be better. And the needle is woven back and forth, and the single piece looks like a bead. This is the popular saying in the knitting industry-bead needle. Woven into a bead needle, no matter whether it is collar picking or sleeve sewing, it will not leave a big hole.

2. Knitting needles go back and forth on the side, and when sewing, the front is sewn one by one. This method is very convenient. After sewing, there is a row of braids at the back.

3. When the sleeves and neckline are arc-shaped, it is best to pick out the first stitch and not knit. Needle selection method: the original upper needle is selected with the lower needle, and the original lower needle is selected with the upper needle.

4. Treatment of the hem of the front:

The edge of the cardigan should be woven into two sides to look good. That is, the first needle in each row is not knitted, and an empty needle is added to continue knitting. Add stitches when you come back, and the last stitch will be one.