What to do if the Apple mobile phone keyboard fails

1. What to do if the iPhone buttons are not working

You can operate as follows:

1. Turn off the iPhone, and then use your finger to press Home After a while, white dirt may appear on the key, and then repeat the "bounce" until it becomes normal.

2. Open any application and hold down the power switch for a few seconds until the slide to shut down instruction appears on the screen. At this point, you can release the power button, but do not slide it to shut down. Press the Home button for a few seconds at the same time until the screen returns to Springboard. This way the Home button has been re-adjusted and should be able to be used normally.

3. Turn off the phone. The iPhone is at a 45-degree angle to the ground, with the home button on the bottom and the earpiece on the top. Use tweezers to take an alcohol cotton ball and press it on the Home button. Press the alcohol cotton ball firmly with the tweezers to let the alcohol seep out, and wipe it back and forth along the edge of the Home button. Repeat this until the alcohol evaporates.

4. One situation that cannot be ruled out is that the Home button may conflict with other programs and cause malfunction. At this time, you can try common flashing methods such as upgrading and restoring firmware.

5. If there is really no way to solve the problem and it is still within the warranty period, then decisively send it to after-sales service! If the warranty period has expired, of course you should find a professional Apple mobile phone repair platform.

1. Apple launched the iPhone development plan with the development code name "Purple 2". At that time, Nintendo's NDS began to become popular around the world, and iPhone design elements such as multi-touch were obviously also affected. .

2. Apple first entered the mobile phone market in 2005, when Apple cooperated with Motorola to launch an iTunes mobile phone-Motorola Rockr. While the device theoretically blended mobile and music, in practice it didn't generate much interest from consumers.

2. What should I do if the buttons on my iPhone cannot be pressed?

Use your fingers to lightly flick the Home button. White dirt may appear after a while, and then repeat the "flick" button. ” until it becomes normal.

Open any application and hold down the power switch for a few seconds until the slide to power off instruction appears on the screen. At this point, you can release the power button, but do not slide it to shut down. Press the Home button for a few seconds at the same time until the screen returns to Springboard. In this way, you have readjusted the Home button and it should be able to be used normally.

Connect the mobile phone to the external power supply, press the Home button until the voice interface appears, and then remove the external power supply. Open "Settings" -> "General" -> "Accessibility" -> "AssistiveTouch" and turn it on to use it.

What should I do if my iPhone cannot be turned on? Press and hold the "power button" on your phone. Press your "phone function key" again.

Key: Press and hold the power key and function key at the same time. Open iTunes and wait for it to prompt you to enter recovery mode. Then hold down the shift key on the keyboard, click "Restore", and select the corresponding firmware to restore.

It may be a hardware failure of the Apple phone. It is recommended to send the phone to an Apple authorized after-sales service store for testing.

3. What should I do if the keys on the Apple mobile phone keyboard are not working?

There are several reasons why the keys are malfunctioning: 1. The metal sheet inside the keyboard is dusty or dirty. Take it apart. Just use alcohol or tenna water to clean the buttons; 2. The button IC is faulty, just replace it; 3. The CPU is soldered or damaged. It is extremely rare that some buttons fail due to software, because if it is a software problem , it must be the fixed screen, that is, there is no response at all when pressing and pressing. It is recommended to go to a more professional repair shop to check again.

If it is a software problem, you can try software restore. If the software still cannot be used normally after restoration, hardware repair may be required.

In addition, please use dfu mode for software restoration, and try not to upgrade to 2.2. The specific method is: 1. Check the firmware information of your phone. Settings-About-Firmware.

If it is 2.2, just connect it to itunes in normal mode and then restore it.

2. If it is not 2.2 (usually 2.1), then please download the corresponding version of the firmware file from the Game Bus.

After downloading and unzipping, proceed to the following steps. 3. Connect the phone to itunes4. Press and hold the home button for 5 seconds, which is the only big round button on your phone. 5. Don’t let go of the home button after that, press the top power button at the same time. Press 10 Seconds 6.

Then release the power, but do not turn on the home. It takes about 10~20 seconds.

Your screen will change. Enter dfu mode.

There will also be instructions on your iTunes. 7. At this time, hold down the shift key on your keyboard and click System Restore. A window will pop up. Just select the firmware file you downloaded before to restore it.

8. If the buttons on the phone still fail after this process, it can only be said that the phone has become bricked. It is recommended to purchase a new machine.

4. What are the solutions to Apple keyboard failure

Computers are becoming more and more popular, and friends with a certain financial strength are beginning to pursue fashionable and exquisitely crafted computers. Therefore, Many friends will choose Apple computers, that is, MacBooks. This is a computer made by Apple. The workmanship is very exquisite, and the system optimization is very good. However, no matter how good the computer is, it will inevitably have various problems. Like MacBook, sometimes the keyboard will malfunction. Many friends will be at a loss when encountering this situation. Today, I will tell you how to solve the problem of Apple keyboard malfunction.

The first method is to restart the computer. Sometimes the problem will be solved. This is a rare case. Second, modify the laptop keyboard driver.

Open the system properties through "My Computer", select the Hardware tab, and open the Device Manager. We found that under the Chinese WindowsXP operating system, the default keyboard driver is "Standard 101/102 Keys or Microsoft Natural PS/ 2 keyboard". Right-click and select Update Driver, and the Hardware Update Wizard will appear: Select "Install from a list or specified location (Advanced)", click "Next", and select "Do not search.

I want to choose myself Installed drivers." Click "Next" and go to the "Select device drivers to install for this hardware" page and remove the small check mark in front of the "Show compatible hardware" checkbox.

Select "JapanesePS/2Keyboard(106/109Key)" in the "Standard Keyboard Model" column, click "Next", and the "Update Driver Warning" will pop up, click "Yes". Continue to click "Yes" in the "Confirm Device Installation" window.

Complete the Hardware Update Wizard and restart your computer. The third method is to modify the registry.

Click the "Start" menu, click "Run", enter "regedit", open the registry, and enter "HKEY_LOCAL_MACHINESYSTEMControlSet001ControlKeyboardLayouts". There are many subkeys in it. Through observation, I found that the ones ending with "0804" Both are simplified Chinese input methods. Open "E00E0804", you can see the "LayoutFile" sub-item in the sub-item on the right. Double-click to open the item, and change "kbdus.

dll" in "Numeric Data" to "kbdjpn. dll" ", "OK".

By analogy, you can change "LayoutFile" in all subkeys ending with "0804" to "kbdjpn. dll". You can choose based on your commonly used input method.

Then just restart your computer and it will be fine! .

5. What to do if the keys of Apple 5s are malfunctioning

You can use “small dots” instead of physical keys.

1. How to set "Screen Dot" on Apple mobile phone: 1. Settings-General-Accessibility-AssistiveTouch-Turn on "AssistiveTouch".

2. Change the icon: Settings-General-Accessibility-AssistiveTouch-Open "AssistiveTouch"-Customize the top menu-Plus sign-Select the icon-Finish.

2. Functions of the "screen dot" icon on the Apple phone: 1. Click the "Home Screen" icon: instead of clicking the Home button. 2. Double-click the "Home Screen" icon: Instead of double-clicking the Home button, you can open the multitasking interface, and slide up to close background applications.

3. Click the "Multi-tasking" icon: Instead of double-clicking the Home button, you can open the multi-tasking interface, and slide up to close background applications. 4. Click the "Lock Screen" icon: Instead of pressing the power button, you can lock the screen.

5. Long press the "Lock Screen" icon: Instead of long pressing the power button, the "Slide to Power Off" interface will pop up. 6. Click the "Mute" icon: instead of pressing the mute key, you can set mute.

7. Click the "Screenshot" icon: instead of "press the power button and the Home button at the same time" to take a screenshot. 8. Press the "Volume Up" and "Volume Down" icons: instead of the volume keys.

9. Click the "Shake" icon: If you set up shaking to change songs, click the "Shake" icon when opening music, and the song will be automatically switched without shaking the phone. .