How does Huawei et 128-2 link the network through WAP?

Enter Device Manager (how to enter Baidu)-Modem-Huawei Mobile CMCC Modem-Right click-Properties-Advanced tab. Fill in at+cgdcont = 1, "IP" and "cmwap" in the space under the extra initialization command, which means that there are two modems in et 128 et 128-2. A Huawei mobile cmcc MMS and a Huawei mobile cmcc modem, sometimes when G3 is unloaded and reloaded by E-line, the established connection will use MMS, and sometimes the modem will be used, so if only the above steps are set, sometimes cmnet traffic will be generated, resulting in huge phone bills (I can understand the bloody lesson). So the settings should be like this: enter the device manager (how to enter Baidu)-Modem-Huawei Mobile CMCC MMS-Right click-Properties-Advanced tab. Fill in at+cgdcont = 1, "IP" and "cmwap" in the blanks under the additional initialization command. No matter which modem you dial, it belongs to cmwap. 2. How to determine whether cmwap is online Start-Run -cmd-OK-ipconfig/ cmwap for all 5.jpg online and cmnet for 6.jpg online. We can see that the main difference is whether there is a dns server. If it is cmnet, it is cmwap. (I hope you can verify it every time you connect. Note: My hardware is Huawei et 128-2 sim: Shanghai Mobile cmwap20 yuan monthly subscription. G3 E compatible version: 3.2. 1. 16 breakthrough limit: PE+ 10.0. 172: 80 agent +pe secondary agent, most software can. Because the signal here is not good, sometimes I can connect to 3g, but in some cases I can't find 3g. I heard that there is another way to crack the access point without cmwap by replacing G3 E file. I haven't tested it. I hope interested friends can try it. Now the file has been cracked at the same time. I hope you can understand the problem of this article. Bring it up for discussion.