Seven general templates for graduation thesis summary

General template for graduation thesis summary 1

According to the teaching plan of this semester and the implementation requirements o

Seven general templates for graduation thesis summary

General template for graduation thesis summary 1

According to the teaching plan of this semester and the implementation requirements of graduation thesis (design) for 20xx undergraduates in our school, in order to do a good job in graduation thesis design, the teaching and research section of our college will teach 4113-115+in one class. 20 undergraduates each have an average of 20 minutes, of which 12 minutes are for students to tell stories themselves and 8 minutes are for teachers to ask questions. This paper mainly discusses the research purpose and significance of graduation thesis work, the work arrangement and plan, and the opinions and suggestions of the tutor. The topic of this year's graduate thesis is novel, which is close to the upsurge of food nutrition and safety research being promoted by the current food science major, conforms to the research difficulty and workload of undergraduate thesis, and has high research value and practical role.

Among them, the topic of 10 student thesis needs to be revised after discussion with the tutor; Three students were too nervous when they spoke, and did not clearly express the purpose and significance of the paper design; Two students did not prepare carefully enough, and read aloud completely according to the prepared draft. Some of the contents were not familiar enough, and there were obvious mistakes, so they needed to improve their reporting skills and ability when defending.

Common problems and solutions:

1. Students don't read important documents carefully and don't know the purpose and method of the experiment. They need to read more reference materials and discuss with their tutors.

2. Work arrangement and progress are generally loose before tight. Once students are busy with postgraduate entrance examination, job hunting, interview, etc. It is difficult to complete the corresponding experiment and summarize the content as planned in the later stage. Teachers need to be instructed to adjust the work plan according to the students' personal situation and actual situation, so as to complete the work content and plan at each stage in time and better arrange the students' study and life before graduation.

Through this group meeting, all the group graduates further clarified the research ideas and contents, which pointed out the direction for the normal development of graduation thesis design research in the future.

General template for graduation thesis summary II

The undergraduate graduation project lasted two and a half months. In these two and a half months, I was able to complete the design task on time and in quantity according to the expected progress. In the early stage of design, the knowledge of structural mechanics, steel structure and reinforced concrete was reviewed, and the Code for Design of Steel Structure and Load Code were consulted. In the middle stage of design, use professional knowledge to design buildings and structures. In the later stage of design, it is mainly to draw construction and construction drawings. During the design period, I received the guidance and help from many teachers of XX Institute of Architecture and Engineering, and I am deeply grateful.

Graduation design is a comprehensive application of knowledge learned in four years in university, and it is a training of integrating theory with practice. After graduation design, I reviewed the professional knowledge I studied in previous classes, and learned and realized the basic skills and ideas of architectural structure design. I deeply realize that as an engineer, we should have a rigorous scientific attitude and strive to be safe, economical, practical, durable and beautiful in the spirit of building people-oriented; In the design process, we should not only strictly follow the requirements of building codes, but also study the coordination of various types of work. What is abnormal is the communication between structure and building, and the coordination between structural design and construction. This requires engineering designers to have a high comprehensive quality, not only to grasp the main contradictions in architectural structure design, but also to study some details. In the process of graduation design, I deeply realized that specification is the navigation mark of design, so we must think more and experience more. In the future study and work, we should constantly strengthen the study and understanding of norms. Only in this way can there be no mistakes.

Learn from each other and pay attention to communication. In the design process, we encountered many problems, so we must be diligent and eager to learn, strive to give full play to the enterprising spirit and creativity of the team, and fully tap the potential of the team, thus improving work efficiency. In engineering practice, we should have the wisdom and strength of the group, so we should pay attention to the cultivation of team spirit.

"Raise a soldier for a thousand days and use it for a while." In the graduation project, I am glad that I can use what I have learned for four years, and I also deeply feel the importance of basic knowledge. When studying professional courses, I always feel that the knowledge I have learned is too far from reality. This idea of quick success and instant benefit has made me relax my study of some professional courses. In the process of graduation project, I deeply realized the significance of "using books and hating less". In the future study and life, we must not rush for success and neglect to lay a solid foundation. "Tall buildings rise from the ground", we should effectively integrate theory with practice and apply what we have learned.

Graduation design is a very important stage in undergraduate education. Master the basic theory, methods and steps of architectural structure design. In the future study and life, I will strengthen the study of professional knowledge and strive to become an excellent engineer as soon as possible. Thank you again for your guidance and help in my graduation project.

General template for graduation thesis summary 3

Four years of college life is coming to an end. Four years' study of architectural structure has cultivated the basic skills of each of us to do architectural structure design independently. Unconsciously, the graduation project is coming to an end, and this half year will be unforgettable. With the coming of graduation day, the graduation project is drawing to a close. After several weeks of hard work, with the guidance of teachers and the help of classmates, I successfully completed this design topic-the training of frame structure diagram and construction organization design of an office building in Yangzhou. Looking back on the whole process of graduation design, I have many experiences, both bitter and sweet! After more than two months' study and design, I have understood the drawings and become familiar with 03G 10 1 drawings, the separation of reinforcement between beams and columns, and the calculation of reinforced area. This is the improvement of my skills.

Graduation design is the last link of students' learning stage, the comprehensive application of basic knowledge and professional knowledge, and a comprehensive process of re-learning and re-improving. This process also cultivates students' learning ability and independent working ability, and the level of graduation design also reflects the comprehensive level of undergraduate education. Therefore, the school attaches great importance to graduation design and strengthens the guidance and mobilization education for graduation design work.

With the help of teachers and classmates, I successfully completed this design project-the frame structure design of an office building in Yangzhou. According to the schedule in the task book, I finished my graduation project on time and accurately. In the early stage of graduation design, I reviewed various related textbooks, including structural mechanics, reinforced concrete, seismic design of building structures, foundation design, architectural architecture and so on. And borrowed relevant design specifications from myself. In the graduation design, we first carried out architectural design. Teacher X is mainly responsible for our architectural design guidance and the correction of architectural drawings. The teacher strictly requires everyone to be beautiful and practical until the graphics meet the specification requirements. Then the structural design. Teacher X is mainly responsible for structural design. Teacher x is serious and responsible. He sees students at least twice a week. When I don't know, the teacher always explains it to us seriously until we all understand. In the graduation project, Qi Xin, a member of our group, worked together and cooperated with each other, giving full play to everyone's team spirit. Near the end of the graduation project, Mr. X instructed us to draw the structural drawing, revise all the drawings and sort out the calculation book.

After this graduation project, I have a further understanding of the knowledge of frame structure. After this design, I really applied the theory I learned to analyze and solve problems, especially in the concrete frame structure, but I also felt the lack of knowledge and the foundation was not solid. At the same time, in the process of drawing, we have improved our ability to use PKPM software and CAD software. This graduation project has enabled our team to master the knowledge I have learned in recent years more systematically, and the completion of the graduation project has also laid a good foundation for me to go to work in the future.

In this graduation project, the relationship between our classmates has been further improved. Students help each other. If we don't understand something, we can discuss it together and listen to different opinions, which is conducive to our better understanding of knowledge, so I am very grateful to my classmates who helped me there. After this graduation project, I understand that knowledge can only be realized through application. Some things are thought to be learned, but when they are really used, they are two different things, so I think they are really learned only when they are really used.

Finally, I want to thank my tutor for his careful guidance and help. In the design process, through consulting a large number of relevant materials, communicating with classmates and self-studying, consulting teachers, I learned a lot of knowledge and experienced a lot of hardships, but the gains were also great. In the whole design, I learned a lot, cultivated my ability to work independently, and established my confidence in my work ability, which I believe will have a very important impact on my future study, work and life. And greatly improved the hands-on ability, so that I fully realized the difficulty of exploration and the joy of success in the creative process. Although this design is not very good, what I learned in the design process is the biggest harvest and wealth of this graduation design, which will benefit me for life.

The end of graduation project means the end of our college life and stepping into the society. Through my own efforts and diligence, I believe I will realize my dream in the future.

General template for graduation thesis summary 4

After this graduation project, I feel that the process is very hard and full of fun.

This graduation project requires the design of a backup and recovery tool for windows multi-system startup mechanism, which is very helpful for me to set foot on my post in the future. Although the students in the last class have done a great job, I still look forward to completing the design through my own efforts and making a breakthrough. This is also my test for myself. Therefore, in this design process, I completely follow the requirements of software design steps, starting from the topic analysis, then carrying out overall design and detailed design, and finally realizing the system. Every step allows me to apply what I have learned in theory to practice. Also let me master a set of standardized design operation procedures.

In the project analysis stage, because this is a backup and recovery tool for designing a windows multi-system startup mechanism, it is particularly important to analyze the startup mechanism. You must fully understand the information provided by the teacher. This is the key, from consulting materials, asking questions, to slowly solving problems one by one, the teacher gave me great help.

In the overall design stage, due to the comprehensive analysis of the subject, the function and menu structure of the tool are fully understood, and the user operation flow chart and functional module hierarchy diagram are formed.

In the detailed design stage, first, the main functions of each module are studied, and programmed and debugged respectively. Secondly, it is very difficult to assemble the written functions, and the complicated interfaces and calls between functions are prone to errors. This requires me to develop a good habit when programming, and declare the functions to be used in the header and add comments to facilitate subsequent search and modification. So the standardization of programming is very important.

Finally, the system realizes the link. Debugging completed program. During debugging, due to logical problems, the partition table of the backup sector is backed up incorrectly, which leads to recovery errors and data loss of the whole hard disk. The hard disk needs to be repartitioned before the system can be used again. I was very anxious at that time, and this mistake also meant that all previous efforts were in vain. But with the analysis and encouragement of the instructor, I corrected the mistake again, found it and corrected it. It made me realize that no matter what scenarios I encounter in the future, I have to analyze the reasons, list possible scenarios, and calmly deal with them, which will inevitably "save the day."

The key and difficult points of this graduation project are: the backup and recovery of the main boot area and the partition table of the boot area. The application of extended int 13 to read and write large-capacity hard disk breaks through the obstacle of capacity limitation.

In a word, I learned a lot from this graduation project. Although it is over, it can only be the beginning. As a programmer in the future, there are still many specifications and programming languages to learn. How to upgrade yourself from ordinary pg to se? In the computer field, there are too many things to learn, but what I learned in college life is limited. Only when we have higher requirements for ourselves can we have new achievements as the driving force!

General template for graduation thesis summary 5

20XX 165438+ 10, I started my graduation thesis. After a long period of writing, the thesis has been basically completed. The writing of the thesis is a long-term process, which requires careful revision, continuous study of various documents and careful summary. After such a long effort, I finally finished my graduation thesis. In the process of writing this graduation thesis, I have countless unforgettable feelings and gains. 65438+ At the beginning of February, my topic was decided in the exchange and discussion with my tutor. That is: the phenomenon of youth literature from the perspective of communication-from the post-80 s writers. As soon as the opening report was finalized, I began to collect information in the school library. At that time, in the face of many articles in the network database, I was really at a loss and didn't know how to start.

I told the instructor about this difficulty. Under the careful guidance of the teacher, I finally learned how to use the vast resources of the school to find the youth literature resources I need. I found about 100 related papers, read them carefully, summarize my notes, and lay a good foundation for my thesis. The main purpose is to find the viewpoints in those papers in the past, so as to avoid duplication of viewpoints and strive to study youth literature from a brand-new angle.

After collecting the materials, I sorted them in the computer, and then summarized my writing materials in different parts. Try to make my information fit the information of the paper, which is beneficial to the writing of the paper. Then hand it over to the teacher for communication in time, and then make relevant changes after listening to the teacher's opinions. The teacher's opinion is always very valuable, which can well point out the deficiency of my data collection and what kind of information I need to improve my article.

At the beginning of 1, the information has been searched and the first draft of the paper has been written. The logical structure of the first draft is a bit unclear, so I will write whatever related issues come to mind, but there is no clear hierarchy, which makes the article look a bit messy. Such an article is inevitably inconsistent with the requirements, but after all, it is a first draft and needs to be revised repeatedly under the guidance of the teacher.

Writing graduation thesis is a process that every college student must go through, and it is also a precious memory before graduation. When we see that our efforts have paid off, we always feel a little proud and excited. Everything is like this, and we need to do it step by step and seriously and rigorously. Only with a good attitude can we do a good job. At the beginning, we all thought that graduation thesis was a very difficult thing, and everyone was inevitably a little scared. However, after a long period of hard work and accumulation, and after constantly searching for information, we all completed the graduation thesis writing according to the teacher's requirements. I believe everyone can appreciate the joy of this harvest. This is the tempering of my will, the improvement of my practical skills, and I believe it will be of great help to my future study and work.

In this graduation thesis, students help each other and discuss related professional issues. This kind of exchange is a very meaningful experience for us who are about to graduate. Four years of college have passed together. Finally, we can get together to discuss and study professional issues, so as to better understand each of us' interests, define our own life dreams, and then give play to our advantages in our future life and work, learn our own majors, and combine them into one.

Thank you for your careful guidance and care, so that I can successfully complete my graduation thesis. Teachers always pay for their students silently. Although many times we don't pay much attention to the writing of the paper and don't finish the tasks assigned by the teacher on time, the teacher can still contact us actively and tell us how to revise the paper and how to finish the work related to the paper as required. Teachers always check carefully, and it is rare to read every tiny format requirement of the paper carefully, read every classmate's paper carefully, and then put forward the most pertinent opinions.

General template for graduation thesis summary 6

After the graduation thesis is completed, you can also write a graduation thesis summary report, which is a summary and reminder to yourself. Because the completion of the graduation thesis not only marks a perfect end to the four years of college, but also lays a good foundation for future life.

The topic of my thesis is "Website design of English course for educational technology majors". I chose this topic because I think it is very challenging. The weaker I am, the more I want to try. In the process of thesis writing and website making, sometimes I feel very hard, and sometimes I have the idea of giving up, but in the end I persisted and successfully completed my graduation project, for my own goals and choices.

At first, it was to collect information. Under the guidance of the tutor, we began to prepare through various channels-collecting relevant academic papers, core journals, books and so on. Through the internet and libraries. After a month of in-depth study, I collected a lot of materials related to graduation design. Under the guidance of teacher Zhang, I abandoned some irrelevant contents and kept some valuable materials as backup. During this period, I went in and out of the library all day. On China HowNet, I searched some academic papers and periodical articles. Search foreign literature on Springer, refer to some graduation thesis samples and some graduation thesis design summaries; In common search engines, I have learned some relevant knowledge, and at the same time I have specially browsed a large number of foreign language websites, and listed these contents as an outline, which is convenient for later inquiry and reduces the workload in the later period.

Next, I began to sort out, analyze and study the collected data, and make a research plan and website design scheme. After the opening report was completed, I immediately entered the intense and orderly writing and website creation. According to the principle of taking the essence and discarding the dross, I wrote the first draft and added my own novel opinions, especially in the process of making the website, I absorbed the advantages of other foreign websites and added my own innovation. During the period, I communicated with Mr. Zhang by telephone, SMS, email, etc., and listened to the teacher's good suggestions and actively adopted them.

The teacher revised the first draft and returned it to me in time. After reading the paper, I found many loopholes, especially the format of the paper. As far as website planning is concerned, I put forward some suggestions, such as not covering all the knowledge in the textbook, but using a chapter as a typical example to express your innovation. At this point, I found that it is not so simple to do a good job, but it is not difficult. It is absolutely impossible to perfunctory things. We should seriously think about everything and complete the task with our thoughts.

An excellent paper is not written, but revised, which requires patience and care. In the process of making the website, I encountered many problems, some of which were beyond my technical scope. Whenever my idea can't be realized or I can't run, I feel impetuous, but I didn't give up, but I adjusted my mentality in time and completed the first design with the help of my classmates and teachers. The less you understand, the more you have to learn. In the process of learning, you will gain a lot. One of them is that learning from each other is the best way to learn. After learning, you will feel a sense of accomplishment, which I realized after I made the website.

After all the work is done, only the graduation thesis defense is left. Before I do it well, I feel that it may be difficult to defend my thesis, and I am inevitably a little worried. It is only after you have really experienced it that you find that anything you think is rare is because you are not sure or ready. I spent two days writing the defense of my graduation thesis. I feel good about myself in the process of defense. Although I was a little nervous at first, I entered the state after two minutes. Because I am explaining what I have done, I feel familiar with my graduation project and discuss it with my teachers and classmates smoothly.

In the whole process of graduation thesis design, I learned the attitude and mentality that I need to do anything. First of all, I learned to be meticulous in my study, and I can't underestimate any problems and deviations that appear. I should solve it in the right way, have patience and perseverance in the process of doing things, and don't give up when encountering difficulties. I can find a way to solve the problem as long as I persist. Learn to cooperate with others in your work and listen to others' opinions carefully, so that you can get twice the result with half the effort.

First of all, I want to thank my tutor, Mr. Zhang Yongfang, and my classmates and friends around me for their help and their valuable opinions and suggestions. In addition, I want to thank all the teachers who taught me knowledge during my college days. It was your careful teaching that gave me a good understanding of specialized courses, which is also the basis for the completion of the thesis.

General template for graduation thesis summary 7

First, the graduation design content

In the traditional land survey process, the field data collection terminal is far away from the indoor data processing center, and the measurement results of the field team can only be checked by self-inspection, and it is impossible to conduct comprehensive inspection and overall summary with other joint investigation teams, which makes the indoor data processing center and data users in a waiting state. Moreover, after the data is brought back, it will take more manpower, material resources and time if it is to be rechecked. This paper mainly studies the data transmission server based on ACE component to realize the data exchange of GPS differential data, GPS positioning data and real-time field data collected by mobile data acquisition system among vehicle-mounted system, mobile data acquisition system and indoor monitoring system in land law enforcement inspection.

For specific objects, when designing the system, the vehicle-mounted system and mobile data acquisition system in land law enforcement inspection are used as clients, and the indoor monitoring system is used as server. This paper studies the data transmission between two clients and 1 server under ACE.

The system server runs as a Windows service in the Windows operating system. When the system starts running, it will monitor TCP connections. After the server is connected to the port, it will start to monitor the data in real time and monitor the customer service on the same port. The customer service side declares its identity and connects to the port where the server side is located. After the connection is successful, the communication between the server and the customer service can be realized. Under such a platform, the client can send messages within the scope of the protocol to the server, and can also send messages to other clients through the server, and other clients can perform various required tasks according to the received messages.

(The system mainly adopts technologies such as C++ and ACE, and runs on Microsoft Windows XP operating system. On the server side, VStudio2005 is used as the development tool, and the network program based on ACE TCP communication is used to realize the server, and various related network programming technologies under ACE are adopted. For the client, you can use any language or tool to develop network programs based on Socket communication, such as Java, C++, C, Visual Basic, etc. In this paper, the TCP communication technology based on ACE is developed by using VStudio2005. )

2. Graduation design achievements

The system can realize the communication between customer service and server. The server is compiled in VStudio2005, and the slogan of the server is set to 3000, and then runs on Windows XP. At this point, the server has bound port 3000, and is listening to this port, waiting for the connection of the client. Run the created client in VStudio2005, set the port it wants to connect to as 3000, and set the IP it wants to connect to as 127.0.0. 1. It can also run in Windows XP. Select the server that communicates with the client, enter some data in the customer service and send it to the server after confirmation, so that the received data can be displayed on the server. The display on the server side also shows the port number, IP address and the number of words received.

After testing, the system can realize data transmission between two clients and 1 server. In the test, I used

The transmitted data is GPS information. First, one of the clients chooses the communication mode, which is called client 1. Here, it chooses to communicate with the client, and the other client is called Client 2. When the client 1 connects to the server, the client 1 sends data to the server, which will be stored in the server. After the task is completed, the client 1 exits and the server waits for another client to arrive. When the client 2 is connected to the server, after the identity is confirmed, the server will send the saved data to the client 2, and the client 2 will realize the communication between the server and two customer service terminals.

Three. The Harvest and Experience of Graduation Design

Graduation design is a comprehensive consideration of the four-year study results of our university, a yardstick to measure whether we can become a qualified graduate, and the last time we show ourselves in university life.

After getting the project assigned to me by my tutor, I began to actively look for the needed reference materials, and contacted my tutor from time to time to discuss the demand analysis of the system I wanted to design. After continuous discussion, trial use of the system and reading of reference materials, a model of remote data service system emerged in front of me.

After starting to write programs for this system, I found that many things are not as simple as I thought. On the internet, simple technology is easy to find, but once this technology is complex and difficult to realize, it is difficult to find relevant information, and we can only explore it bit by bit from the text of the information. Although it takes a lot of time and energy, only in this way can we realize the sense of achievement in creation, and we can only get nothing by following the trend.

At the beginning of the data service system, there were many problems where there were no problems at ordinary times. After a large number of reference materials, search related, repeated scrutiny, careful inspection, the problems found have been solved one by one.

In the whole process of graduation design, I experienced failures and setbacks, and also enjoyed the sense of accomplishment and joy of overcoming difficulties and getting out of trouble. And this process is like life, there are ups and downs, but as long as you persist, there is no insurmountable difficulty.

Thank you, teacher Meng, for your careful guidance and help. In the design process, through consulting a large number of relevant materials, exchanging experiences with classmates, self-study and consulting teachers, I learned a lot of knowledge and experienced a lot of hardships, but I also gained a lot. I learned a lot in the whole design, and also cultivated my ability to work independently, and established my confidence in my work ability, which I believe will have a very important impact on my future study, work and life.