What should I do if the volume of red rice mobile phone is low?

1. What should I do if the speaker of the red rice phone becomes louder?

This is caused by the volume of the mobile phone being turned down, the speaker being blocked or the hardware problem of the mobile phone.

First, turn up the volume of your mobile phone. The specific method is as follows:

1. First click "Settings" on the phone desktop, as shown in the figure.

2. Then select the "Sound and Vibration" option in the setting interface of the mobile phone.

3. After entering the sound and vibration interface, slide the slider in the red box below to the right to increase the volume of the mobile phone.

Second, clean up foreign bodies or water stains in the speaker.

Third, take your mobile phone to Xiaomi's official customer service center for repair.

2. What if 2.Redmi's voice is low?

First of all, please declare: those who have no computer experience or are trying Android for the first time should be carefully debugged.

It is best to back up the parameters before modifying them to prevent the loss of important data. Step 1: The mobile phone must be ROOT, and the root method can be searched in the forum. It is recommended to use the main root.

Step 2: Install the mobile phone uncle toolbox (attached). Step 3: Open the mobile phone uncle toolbox and enter the engineering mode. Step 4: Enter the Engineering Mode (MTK). Step 5: Enter the hardware test. Step 6: Input audio. The following options indicate the normal mode (headphone mode) speaker mode. Step 7: Enter the required modifications. Type selects various audio types, Level selects the volume level, which is the maximum volume level of level 6, 0 is mute 1-6 is adjustable volume level, and Value sets the maximum size of the currently selected volume level to 255. It is suggested that level 6 should be set at around 250.

Max Vol Vol is the largest, and it is recommended to set it to around 150. Note: The values of normal mode and speaker mode need the same tone.

Let's explain how to set it up. 1: Here's how to adjust the volume of the receiver: Select Hardware Test-Audio-Normal Mode, and then select SPH. Now, start setting several levels. After filling in the numbers, just click Settings and it will take effect without restarting the phone. You can set it according to your own preferences. My settings are as follows: Level 0 ~ ~ Value 0 Set Level 1 ~ ~ Value 45 Set Level 2 ~ ~ Value 60 Set Level 3 ~ ~ Value 80 Set Level 4 ~ ~ Value 100 Set Level 5 ~ ~ Value. E 120 set 6 levels ~ ~ value 140 set 2: * * Volume adjustment mode: select speaker mode and ringtone, and now set several levels. After filling in the numbers, click Settings, which can be set according to your own preferences. My settings are as follows: level 0 ~ ~ value0set level1~ ~ value60set level 2 ~ ~ value130set level 3 ~ ~ value160set level 4 ~ ~ value190set. Level 5 ~ ~ Value 2 10 Set Level 6 ~ ~ Value 230 Set 3: Multimedia volume mode: select speaker mode and media. Now, after filling in the numbers, just click Settings, and you can set them according to your own preferences. My settings are as follows: level 0 ~ ~ value0set level1~ ~ value60set level 2 ~ ~ value130set level 3 ~ ~ value160set level 4 ~ ~ value190set. LEVEL 5 ~ ~ Value 2 10 Set Level 6 ~ ~ Value 230 Set 4: Microphone volume setting method: select audio-then select MIC for speaker mode. Now set up several levels. After filling in the numbers, click Settings, which can be set according to your own preferences. My settings are as follows: level 0 ~ ~ value 200 setting level 1 ~ ~ value 200 setting level 2 ~ ~ value 200 setting level 3 ~ ~ value 200 setting level 4 ~ ~ value 200 setting level 5 ~ ~ value. 200 Set 6 levels ~ ~ ~ The value of 200 sets the maximum volume. If the maximum sound sense is small, it can be increased appropriately, and if there is staccato, it can be reduced appropriately.

All types have been modified. Try listening to the music again, * * *, and the effect will be much better. You can ask me if you don't understand, and you don't have serious debugging experience.

3. How to increase the volume of red rice mobile phone?

The volume adjustment of red rice mobile phone can be carried out as follows: install uncle mobile phone toolbox-audio-adjust volume-restart.

The specific method comprises the following steps:

1. Install the mobile phone uncle toolbox and open it to enter the engineering mode.

2. Enter the phone, slide left to the hardware test, and then click "Audio" to enter and adjust the volume value.

3. After entering 3. For the audio item, we can see the first three options, namely, normal mode, earphone mode, speaker mode and the option to enter speaker mode (this is * * *).

4. In the position of 4. The value is 0-255, fill in the maximum value on the right, that is, 255, and then click "Settings" to confirm (hint: please reduce the value if there is staccato). Max Vol. 0- 160, fill in the maximum value on the right, that is, 160, and then click "Set" to confirm (hint: please reduce the value if there is a break).

5. Adjust the earphone volume. Select headset mode. The adjustment method is the same as above, and there is no need to skip the adjustment.

6. Just restart your phone.

4. What should I do if the voice of the red rice mobile phone is low?

Enter the dialing interface and enter "* #13411# * *" to enter the MTK engineering mode.

Enter "Hardware Test" → "Audio". Adjust the earphone volume to enter "earphone mode", select "media" and "level Media" as the type item, and level is the adjustment range of the volume key.

Level 0 is the minimum volume, and mine is the minimum volume of headphones. Just change the value of level 0 (usually 75), and you will feel as much as you change it. Click the settings on the right to save. Adjust the microphone volume to enter "Normal Mode" and select "mic" as the type item. If the problem is that the microphone volume is low, change the value of 0-6 to 250 (what do you think), and save it after changing the settings on the right.

5. What should I do if the voice of the red rice phone is low?

1. Enter the dialing interface and enter "* # * #1341# * *" to enter the MTK engineering mode.

2. Enter "Hardware Test" → "Audio".

3. Adjust the earphone volume to enter "earphone mode", and select "media" and "level Media" as the type item, and level is the adjustment range of the volume key.

Level 0 is the minimum volume, and mine is the minimum volume of headphones. Just change the value of level 0 (usually 75), and you will feel as much as you change it. Click the settings on the right to save.

4. Adjust the microphone volume to enter "Normal Mode" and select "Mic" as the type item. If the problem is that the microphone volume is low, change the value of 0-6 to 250 (what do you think), and save it after changing the settings on the right.

6. The red rice phone is too loud.

Take Red Rice note as an example, 1. First, open the dialing interface of the mobile phone.

2. Then enter *#*#3646633#*#*, as shown below: 3. Slide the menu to the hardware test menu and enter the audio option, as shown in Figure 4. Enter speaker modulation mode. As shown in figure: 5. The following options are available: ringing (incoming call *** )Sip (built-in) Mic (microphone) FMR (radio) Sph (speaker) Sph2 (receiver) Sid (note) media (antenna signal). 6. Find the level option, where 0 is mute and 1- 14 is adjustable sound, as shown in figure 7. Finally, click OK to restart the phone.

7. What should I do if the volume of the red rice phone is low?

1. Enter *#*#3646633#*#*, and select the audio option after entering the engineering mode.

2. After entering, find the loudspakermode option, which is the * * * option for the played sound.

3. Click on the small yellow triangle on the right of level 0 in the third row, select level 6, and then fill in the position where the Value is 0-255, and the maximum value on the right is 255. Finally, click Set to confirm.

4.Max Vol. 0- 160, fill in the maximum value on the right, that is, 160, and then click Set to confirm.

5. Restart the phone to take effect after adjustment.

8. How to adjust the engineering settings when the voice of Xiaomi red rice mobile phone is small?

First, enter the dialing page, and enter "* # 3646633 # * # *" on the dialing page to enter the engineering mode of MTK.

After entering the engineering mode interface, slide to the right twice to find the "Audio" option under the "HardwareTesting" option, and click to enter, the following interface will appear: NormalMode normal mode; HeadsetMode headset mode; Speaker mode Speaker/external sound mode. You need to tune which note, just click which one to enter.

Generally speaking, the sound of external speakers is low, so here is to explain the detailed replacement steps. Click "LoudspeakerMode", and the left interface will appear. Maximum volume of system mode 1 16, maximum adjustable volume 160. From here, we can see the reasons for the low turnover.

Don't worry about the category here, but the volume level here. After clicking, you can find that the volume level of Red Rice note is 14, while that of Redmi is only 6, which is why you feel that the volume span in Redmi is relatively small. The volume level here is from Level0- 14, regardless of the previous one. We directly select the option of Level 14, then fill in 255 in the option of Valueis0-255, click Save Settings, fill in 160 in the option of MaxVol0- 160, and click Save Settings.

It should be noted here that the number entered should not exceed the maximum limit. The volume adjustment of headphones is similar to the above steps. Click HeadsetMode to enter, select the maximum level, and enter the corresponding value to save.

Just adjust the value of the maximum sound. The maximum value of the value setting is 255. Suggest the best level 14, MaxVol maximum volume 160. The recommended setting is 150. If the MaxVol is broken after being turned up, it can be reduced appropriately and the above steps can be repeated until it is satisfactory.

Note: the values of NormalMode and LoudspeakerMode must be the same.