Millet flat 4plus parameters

The configuration parameters of Xiaomi Tablet 4 Plus are as follows:

CPU: Snapdragon 660AIE processor, the highest frequency is 2.2 GHz?

Memory and capacity: 4gb+64gb/4gb+128gb; LPDDR4x dual channel memory, eMMC5. 1 high speed flash memory?

Screen: 10. 1 inch full HD screen (16: 10 screen ratio, 1920x 1200FHD, 224 pixels per inch,1000. Support eye protection mode, standard mode, enhancement mode, luminous screen, intelligent adaptation mode stepless color temperature?

Camera: rear camera:13 megapixel rear camera; F/2.0 aperture; Support HDR；; ; Support beauty; Support 1080p video shooting, 1920x 1080 30-frame front camera: 5 megapixel front camera; F/2.0 aperture; Support pre-beauty; Support HDR；; ; Support face recognition?

Facial recognition: front fingerprint unlocking?

Fingerprint recognition: AI face unlocking?

Charging and battery: 8620 mAh (typical); Support 5 V /2 A charging; Standard 5 V /2 A charger?

Network and standard: support single card, not limited to operators, single Nano-SIM card slot; Support mobile/Unicom/telecom 4G, support mobile/Unicom 4G+ support protocol 802.11a/b/g/n/ac; Support 2.4 G WiFi/5 G WiFi/WiFi Direct; ; Support 2× 2wi-fi MIMO; Support Bluetooth 5.0?

Navigation and positioning: GPS, AGPS, GLONASS, Beid?

Sensor: gyroscope; Acceleration sensor; Ambient light sensor; Hall sensor; Electronic compass?

Appearance of millet flat plate 4

The front of Xiaomi flat panel 4 is an 8-inch screen with the size of 16: 10, which is thinner and longer than the traditional flat panel. The four corners of the screen are chamfered with R-shaped arcs corresponding to the frame, and the four peripheral frames of the screen do not use the ultra-narrow frame elements on the mobile phone, which is still a relatively traditional shape.

The overall size is 20cm* 12cm, which is smaller than half a piece of A4 paper and weighs 340g, which is roughly equivalent to the weight of two Xiaomi 8 mobile phones and slightly heavier.

Only the central front camera can be seen at the top of the screen, and the light sensor and LED indicator are well hidden.