Huawei watch3 is connected to Xiaomi mobile phone, and there is no response.

The following self-discovery through pairing wearable devices with mobile phones needs to meet the following conditions:1; Only Huawei mobile phones with emui 10. 1/ HarmonyOS system 2.0 and above support this function, and the Bluetooth switch of the mobile phone is turned on, but Huawei Health App is not turned on. 2. Watches/bracelets are paired. If the above conditions have been met, please put the watch/bracelet close to the mobile phone and away from other electronic devices, and try to make the two devices close together and find the pairing by yourself. If there are still anomalies, you can use Huawei Health App to manually add devices for pairing, or check according to the following scenarios. When 1. approaches, the phone will not play the approach discovery prompt box, so you cannot pair. 1. The Bluetooth broadcast time near the watch/bracelet is 1 minute, and the broadcast stops after 1 minute. If there is no operation for 1 minute, please try to light the watch/bracelet screen and trigger the near discovery broadcast again. 2. When the mobile phone is connected to WLAN, click on the mobile phone and set >; Application > application management, click three points in the upper right corner > Show system program, search for application device connection service, click Store to delete data, clear the cache, turn off the Bluetooth of the mobile phone, wait 15-20 seconds, click the watch side key, and get close to the mobile phone for pairing. Second, waiting for a period of time after popping up the box indicates that the pairing failed. 1. Check whether there is pairing information in the Bluetooth of the mobile phone system. ; Paired device Bluetooth, if it exists, will not be paired. Turn off the screen of the mobile phone and then turn it on, or turn off the Bluetooth of the mobile phone to trigger the matching of the near-looking bullet box again. 2. Please try to turn off the phone screen or switch the phone Bluetooth, then turn it back on and try again.