How to make cloud ornaments Three methods of making cloud ornaments

Catalogue method 1: make basic cotton cloud 1, and cut four thin iron wires with equal length with wire cutters. 2. Twist the wire into a ring. 3. Make the two rings perpendicular to each other. 4. Fix the two rings with glue or iron wire. 5. Add two X-shaped iron rings to complete the frame of the cloud. 6. Stick the polyester cotton on the iron wire with hot melt adhesive. 7. Continue to glue the polyester cotton to the wire frame until every inch of wire is wrapped. 8. Fill the gap with small pieces of polyester cotton. 9. Create a fluffy feeling. 10. Tie a fishing line on the cloud. 1 1. Hang the cloud on the ceiling. Method 2: Make noctilucent cloud 1 and prepare a white paper lantern. 2. Stick a ball of polyester cotton on the lantern. 3. Continue to stick more polyester cotton on lanterns with hot glue. 4. Fill the gap with small pieces of polyester cotton. 5. Create a fluffy feeling. 6. Increase lighting facilities. 7. Tie a fishing line at the top of the cloud. 8. Hanging clouds. Method 3: Make 3D paper cloud 1 and draw the basic shape of the cloud on the cardboard. 2. Cut the clouds off the cardboard. 3. Draw clouds along the edges of clouds cut on white cardboard. 4. Cut the clouds carefully. 5. Squeeze a thin layer of hot glue between clouds. 6. Put a fishing line directly on the hot glue. 7. Fold another cloud in half. 8. Stick the folded edge on the hot melt adhesive. 9. Hang the cloud with a rope. 10, make more clouds. 1 1. You can also stick the fishing line in an embroidered apron. The basic version of cloud-glowing cloud paper 3D cloud There are few things in the world that can make people relax and think like clouds. Unfortunately, we can't always appreciate their beautiful figures. This article will teach you how to make cloud ornaments. In this way, even indoors, you can enjoy looking up at the blue sky.

Method 1: basic cotton cloud was made.

1. Cut four thin iron wires with equal length with wire cutters. The length of the wire depends on the size of the cloud you make. Remember, these wires will be bent into a ring. The wires must be roughly the same length.

2. Twist the wire into a ring. Take a wire and put the two ends together. The length of the overlapping part is 2.5 cm. Then screw the two ends together and fix them. The other three iron wires are treated in the same way.

3. Make the two rings perpendicular to each other. Pick up one ring horizontally, and then insert another ring vertically into the first ring. The last two rings should cross each other, and the connecting line of the two intersections is the center line of two circles respectively.

4. Fix the two rings with glue or iron wire. You can use a hot glue gun to glue the intersection of iron wires firmly, or you can tie other iron wires at the intersection to fix them. Either way, the sharp thread and the circle should be screwed together.

5. Add two X-shaped iron rings to complete the frame of the cloud. First, place the third iron ring obliquely on the two intersecting circles from the left, and fix the intersection point with hot glue or iron wire. Then, the fourth ring is obliquely sleeved on the three rings from the right side and fixed in the same way. The two newly added rings should cross in an X-shape.

6. Stick the polyester cotton on the iron wire with hot melt adhesive. Pull a long strip of polyester cotton, squeeze it into hot glue, and then wrap the filler on the wire. At least two iron wires should be wrapped around each polyester cotton. Hot glue will soon cool and solidify, so act quickly!

7. Continue to glue the polyester cotton to the wire frame until every inch of wire is wrapped. Be careful when pasting, wrapping it too tightly will affect the shape of the cloud.

8. Fill the gap with small pieces of polyester cotton. After the clouds are roughly formed, tear off a small piece of polyester cotton, coat it with hot melt adhesive and stick it on the clouds.

9. Create a fluffy feeling. If the cloud looks too round, you can gently pull it to loosen the small pieces of polyester and cotton. With a sense of concavity and convexity, the clouds look more realistic. Don't push too hard, or the polyester cotton will be torn. Expert tips

Claire Donovan-blackwood

Claire Donovan-Blackwood is an expert in arts and crafts, the owner of Heart manual UK, and is committed to creating a happy and creative life. She is a senior blogger with 12 years of rich experience. She likes to make easy-to-learn handicrafts and DIY works, especially paying attention to mindfulness training in the production process.

Claire Donovan-blackwood

An expert in arts and handicrafts

Cotton clouds can be made into lanterns. Claire Donovan-Blackwood, the boss of Heart manufactured UK, revealed a trick: "If you use polyester filaments to make clouds, you can gently tear them apart until they become even and fluffy. Then use hot melt adhesive to stick the fiber silk to the paper. Finally, you can hang clouds on lanterns as lanterns. "

10. Tie a fishing line on the cloud. Cut a long fishing line. Reach into the clouds and find the intersection of two wires. Tie the fishing line at the crossroads.

1 1. Hang the cloud on the ceiling. You can tie one end of the fishing line to the ceiling. If you want to fix it more firmly, nail a hook to the ceiling and tie a trap to the hook at the end of the fishing line.

Method 2: Make noctilucent clouds.

1, prepare a white lantern. If you want to make a big cloud, stick two small lanterns together with a glue gun.

2. Stick a ball of polyester cotton on the lantern. Tear off a piece of cotton candy-sized polyester cotton, squeeze some hot glue on it, and then stick the polyester cotton and the lantern together.

3. Continue to stick more polyester cotton on lanterns with hot glue. Try to change the size of cotton balls-big, small and medium. Don't miss the top and bottom of the lantern.

4. Fill the gap with small pieces of polyester cotton. This time, apply the hot melt adhesive directly to the lantern, and then quickly stick the polyester cotton. If the cloud is made up of several lanterns, don't forget to fill the gaps between the lanterns with polyester cotton.

5. Create a fluffy feeling. Gently loosen the polyester cotton and let the clouds swell. Try to make cotton balls appear in different sizes so that the clouds are more realistic.

6. Increase lighting facilities. For simplicity and quickness, put a battery-powered LED light in the lantern. You can also put a string of decorative white lights in the lantern. If you use popsicle lights, you can even pull the string of lights out from under the lanterns to create the effect of raindrops. The light source installed in the lantern must not generate too much heat, and the light must be turned off when no one is around.

7. Tie a fishing line at the top of the cloud. Reach out to the top of the clouds. When you touch the hanging point, tie the fishing line. If the clouds are made up of multiple lanterns, then each cloud should be connected by a fishing line. When finished, don't forget to cover it with polyester cotton.

8. Hanging clouds. Install some hooks on the ceiling. Tie the end of the fishing line into a circle and hang it on the hook. There is a lantern hanging on each hook. If there are three little lanterns hidden in a cloud, it always needs three hooks.

Method 3: Make 3D paper clouds

1. Draw the basic shape of the cloud on the cardboard. Draw a simple outline of the cloud on the cardboard with a pencil or marker. This is your template. Draw it as big as the final cloud. If you don't know how to draw clouds, you can search for "the shape of clouds" under Baidu pictures. Search engines will provide you with countless choices.

2. Cut the clouds off the cardboard. Cut along the line with sharp scissors, or cut with an art knife. After cutting the whole cloud, throw away the remaining cardboard.

3. Draw clouds along the edges of clouds cut on white cardboard. Choose cardboard so that the clouds are strong enough. Put two pieces of cardboard under the template. Use a pencil to understate and avoid leaving dark pencil marks.

4. Cut the clouds carefully. Cut out the shape of the cloud with scissors or art knife. In order not to let the clouds have obvious pencil marks, try to cut along the line. If you accidentally leave pencil marks on the cardboard, gently wipe them off with an eraser. Be careful not to bend the edge of the paper.

5. Squeeze a thin layer of hot glue between clouds. Heating glue gun. Put a cut cloud on the table. Squeeze a thin layer of hot glue on the center line of the cloud from top to bottom.

6. Put a fishing line directly on the hot glue. Cut a fishing line to hang the clouds. The fishing line can be long or short, it's up to you. Generally it can be between 15 and 45 cm. Place the thread vertically on the extruded hot melt adhesive. Fishing line is used to hang clouds, not at the bottom of clouds; In other words, the fishing line can only extend from above the clouds.

Be sure to use a transparent fishing line. In this way, the cloud will feel suspended when it is hung. Don't use metal fishing line.

7. Fold another cloud in half. Put the clouds with fishing lines aside for the time being. Take out another cloud and fold it horizontally. The crease should be in the same position as the glue seam on the first cloud-the cloud splits in two from top to bottom.

8. Stick the folded edge on the hot melt adhesive. After the second cloud is folded in half, align the folded edge with the hot glue on the first cloud, and then press it by hand. To ensure that the two clouds stick together firmly, hold it down for 30 to 60 seconds before releasing it. If the previous glue dries, squeeze a thin layer of hot melt adhesive on the original line.

9. Hang the cloud with a rope. Hang it wherever you want! Such as lights, ceiling hooks, ceiling fans and so on.

10, make more clouds. Only one cloud is definitely not enough! Repeat the above steps to make more clouds. Fishing lines can also be different in length, so that the clouds will rise and fall after hanging, which is more beautiful. You can also hang several clouds on the same fishing line to create the effect of Dieyun. Remember, each 3D cloud is made up of two cut 2D white clouds. If you want to make 6 3D clouds, you need to cut out 12 clouds with white cardboard.

1 1. You can also stick the fishing line in an embroidered apron. The apron is round, which is most suitable for making movable ornaments. It is best to have long and short fishing lines for hanging clouds, but the length of the fishing lines above the apron must be the same, because these lines are used to hang ornaments. When the glue dries, tie the fishing line on the sheet with a knot. Then, you can hang these lovely clouds anywhere you like.

An apron is a small wooden ring used to fix cloth when embroidery or other needlework is finished. Ordinary handicrafts or sewing supplies can be bought. There is usually a small metal tightening device on the wood circle, but this device is not used when making clouds.

Tips If the effect is good, do more; The ceiling covered with clouds looks particularly cool.

It is suggested that the paper lanterns should be painted with luminous paint to make the clouds glow in the dark.

Don't pull the polyester cotton excessively, otherwise it will tear the cotton and the clouds will be deformed.

Warning that polyester cotton is flammable, do not let the cloud near any heat source such as desk lamps and chandeliers.

you need

The basic version of the cloud

Polyester cotton

No.24 galvanized iron wire (diameter 0.56 mm)

combination pliers

Line or fishing line

Tape or hook

Glowing clouds

White paper lantern

Polyester cotton

Hot melt glue gun

Hot melt adhesive stick

corner

scissors

Chandelier hook

Battery-powered LED lights or strings of lights

Paper three-dimensional cloud

untrue

White thick cardboard

Scissors or art knives

Hot melt glue gun

Hot melt adhesive stick

corner

Embroidered apron

Chandelier hook

print

This page has been accessed12,291times. Is this article helpful to you? Whether enabling cookies can optimize your experience with wikiHow. Accept our cookie rules and continue to use wikiHow.

classify

Interests and crafts

home page

About Wikipedia

expert

contact us

Site map

Terms of Use (English)

Privacy policy

Don't sell my information

Do not sell information

Pay attention to us

6 1 1