Pay attention to how to draw the sign of the steps.

Watch your step sign is drawn like this: draw a step, and if someone falls, mark the words "Watch your step" with yellow warning color.

Steps generally refer to buildings made of bricks, stones and concrete for people to go up and down, mostly in front of the gate or on the ramp. The calculation of engineering quantity generally involves the calculation of step engineering quantity.

The step width of indoor and outdoor steps in public buildings should not be less than 0.30m, the step height should not be greater than 0.15m and should not be less than 0.10m, and the steps should be anti-skid. The number of indoor steps should not be less than 2 levels. When the height difference is less than level 2, it should be set according to the ramp.

In crowded places, when the step height exceeds 0.70 meters and the side is facing the sky, there should be protective facilities. Outdoor steps are composed of platforms and steps. The platform surface should be about 500mm wider than both sides of the doorway, and 20-50mm lower than the indoor terrace, and the slope of outward drainage is about 1%.

The slope formed by the steps should be gentler than that of the stairs. The width of the steps is generally not less than 300mm and the height is not more than150mm. When the indoor and outdoor height difference exceeds 1 1,000 mm, enclosure railings or fences shall be set on the airport side of the steps.

The method for posting the warning step indication sign is as follows:

1, posted on the facade of the steps.

2. Make a three-dimensional logo frame next to the steps.

Put it in an eye-catching position before going up the steps.

Stick it on the ground under the first step.

Stick it on the wall at the corner of the upper step.

6. Hanging on the wall above the steps.