Coal mine safety protection management system and establishment of warning sign system

Safety protection facility management system (first example)

In order to further strengthen the management of pressure wind self-rescue devices, anti-outbreak metal fences, explosion-proof water sheds and gas outburst anti-backwind devices Supervision to ensure the safety of workers at the mining face. Under the guidance of the mine leaders and in accordance with the "one supply and three prevention" management regulations, this management system was specially formulated.

The construction unit is responsible for the installation and management of pressure air self-rescue devices, anti-explosion metal fences, and explosion-proof water sheds. The construction unit must do a good job in daily maintenance of these protective facilities. As the work surface progresses, the construction unit Pressure air self-rescue devices must be replenished in a timely manner in accordance with regulations, and the positions of anti-outbreak metal fences and explosion-proof water sheds must be adjusted to ensure compliance with regulatory requirements; the ventilation area must be responsible for the installation and management of gas outburst anti-backwind devices, and the ventilation area must do a good job of preventing backwind devices. Routine maintenance and inspection work.

A project inspection and sales number system will be implemented for each important link of the safety protection system such as anti-outbreak fences, anti-backwind devices, and three reverse anti-outbreak air doors.

The Outbreak Prevention Department and the Safety Supervision Department are responsible for the supervision and inspection of pressure wind self-rescue devices, anti-outbreak metal fences, explosion-proof water sheds and gas outburst anti-backwind devices. If the existing hidden dangers are not rectified within the time limit, the safety department will be punished. The Supervision Section shall impose penalties according to the circumstances and hold relevant personnel accountable.

Safety protection device management system (second example)

Article 1

All newly manufactured or purchased equipment must have complete and effective safety protection devices It can only be put into use after passing the inspection and acceptance by the Production Technology Department.

Article 2

In addition to daily maintenance, intermediate maintenance and overhaul of equipment in use, maintenance safety protection devices, workshop leaders and maintenance personnel must be clearly specified on the maintenance order Make a complete inventory of the safety devices of the equipment in this workshop. If damage is found at any time, timely maintenance should be arranged and records should be kept, including:

1. Various pump couplings should be equipped with protective plates.

2. Protective covers or blocks should be installed on various transmission belts and wheels.

3. Straight ladders, inclined ladders, and flat surfaces should meet relevant requirements. The safety guardrails of various ladder access platforms should not be less than 110 cm, and the distance between vertical poles should not be greater than 20 cm.

4. Mechanical interlocking guardrails, support bars, limiters, etc. on each floor of the elevator.

5. Mobile and seasonal exhaust fans and various types of axial flow exhaust fans or electric fans that can be accessed by the hand should be equipped with protective nets or welded isolation grids, strips, and shields.

6. Various protective nets, covers, and fences should be installed firmly to facilitate maintenance.

Article 3

Production workers must check whether the protective devices are complete and effective before using the equipment. If there is any problem with the protective cover, they must promptly notify the workshop, department and relevant personnel for maintenance.

Article 4

Safety protection devices may not be dismantled or modified arbitrarily without the consent of the production and maintenance department. Anyone who discovers unauthorized dismantling or random damage during inspections at all levels will be severely criticized and educated on those responsible, and the department will be ordered to reinstall it. The parties will be fined 100-500 yuan. Those who cause accidents or nearly cause accidents will be held accountable in accordance with relevant regulations. , and shall be implemented in accordance with relevant regulations.

Warning signs and management system (first example)

1. Different warning signs and Chinese warning instructions should be equipped according to the types of occupational disease hazards.

(1) Set warning signs and Chinese warning instructions in conspicuous positions at work positions where serious occupational disease hazards occur. Warning statements should specify the types, consequences, prevention and emergency treatment measures of occupational disease hazards.

(2) For equipment that produces occupational disease hazards, warning signs and Chinese warning instructions must be placed in conspicuous locations on the equipment. The warning instructions should state the performance of the equipment, the types of occupational disease hazards that may occur, safe operation and Maintenance precautions, occupational disease protection and emergency treatment measures, etc.

(3) In storage areas where chemicals, radioactive isotopes, and materials containing radioactive substances that cause occupational disease hazards are stored, dangerous goods signs or radioactive warning signs must be set up at the door of the room or next to the equipment (materials).

2. Warning signs should be designated with dedicated personnel responsible for inspection and maintenance. They should be inspected once a month and maintained and replaced in a timely manner.

3. Warning instructions must not be changed at will, discarded, or altered.

4. If warning signs are found to be missing, altered, damaged, etc., report them immediately to the security department, who will be responsible for replacing them as soon as possible to avoid misleading employees.

5. Anyone who intentionally damages, alters, or steals warning signs will be punished by the unit leader, depending on the severity of the case, such as warning, fine, classification, or expulsion.

Safety Warning Sign Management System (Second Example)

At present, there is a prominent phenomenon of random removal of safety warning signs and safety placards at construction sites, resulting in damage to the signs. According to Article 26 of the "Work Safety Law", "Production and business units shall set up obvious safety warning signs at production and business sites and related facilities and equipment with relatively high risk factors." These regulations are specially formulated.

1. Regulations

(1) No one may move or dismantle various safety warning signs at the construction site without the consent of the construction site management personnel.

(2) Safety officers of each construction team shall carefully identify dangerous factors in the work area, and set up obvious safety warning signs in production and business premises and related facilities and equipment with greater risk factors; each construction team shall be responsible for Safety warning signs set for maintenance.

2. Supervision and management

The Mine Safety Section and the Office shall supervise and manage the safety signs, slogans and construction teams at the construction site in accordance with these regulations;

Mine Safety Section and office personnel should be loyal to their duties and adhere to principles; any construction team that fails to comply with regulations will be dealt with strictly in accordance with these regulations.

3. Responsibility

(1) Any construction team that commits any of the following acts will be subject to financial penalties:

① Without the consent of the construction site management personnel , move or dismantle safety warning signs and slogans, and those who cause damage to safety warning signs and slogans will be fined 50-100 yuan;

② Moving or dismantling safety warnings without the consent of the construction site management personnel Signs and slogans, those who cause damage to safety warning signs and slogans shall be compensated for the cost of the sign and shall be fined 50-100 yuan;

③ Those who intentionally cause damage to safety warning signs and slogans shall be compensated for the cost of the sign , and a financial fine of 150-300 yuan will be imposed;

(2) Each construction team that commits any of the following acts will be required to make corrections within a time limit; those who fail to make corrections within the time limit will be given a financial penalty of 50-200 yuan:

p>

①The team safety officer failed to identify hazardous factors at the construction site;

②The team failed to set up obvious safety warning signs in places with greater risk factors and on related facilities and equipment.

4. Supplementary Provisions

Production and business premises and related facilities and equipment with greater risk factors generally refer to the nature of operations, equipment, materials or storage used in the production and business premises The items have dangerous factors and can easily cause casualties to employees or other personnel, or the operation and use of relevant facilities and equipment can easily cause personal injury.

Safety warning signs refer to various signs, words, symbols, lights, etc. that remind people to pay attention. At the same time, safety warning signs should be obvious and easy to identify by operators and the public.