Speech on chemical safety responsibility 222

Chemical production is characterized by flammability, explosiveness, poisoning, high temperature, high pressure and corrosion, so safety production is more important in chemical industry. The following is my carefully collected speech on chemical safety responsibility 221. I will share it with you and enjoy it.

chemical safety responsibility speech 1

guided by the safety production management policy of "enhancing safety awareness, strengthening safety education, vigorously implementing various safety systems, strengthening various safety inspections, eliminating various potential safety hazards, and ensuring safe production", the safety education is carried out step by step from the safety officers of various departments, and typical accidents such as sodium decomposition and high-voltage post fire in the past are taken as the control focus, so as to do a good job in safety production and safety inspection, focusing on governance and management. I carried out the plan carefully. Through the practical implementation of the company's safety production management policy, through the practical work of all the staff in the safety department and the active cooperation and efforts of the leaders and employees of various workshops and departments, the accident rate decreased significantly compared with the same period of last year, and the safety production goal in the first half of the year was achieved. The work in the first half of this year is summarized as follows:

1. Strengthen safety education in various forms to enhance the safety awareness of employees

1. Concentrate the safety officers in all workshops and sections for safety training, study and discussion every Thursday afternoon, learn safety technology and safety management knowledge, distribute learning materials, timely convey and implement the spirit and requirements of superior documents, analyze and discuss various recent accident cases at home and abroad, and draw inferences from others to find problems and formulate preventive measures in combination with the actual situation of the company. And require the safety personnel of all departments to implement the contents and spirit of the meeting to all the staff in the workshop in time. In addition, according to the seasonal characteristics, combined with the actual production situation of the company and the problems existing last week, the matters needing attention next week were comprehensively analyzed and deployed, and the problems were found and solved in time, giving full play to the role of the safety management network.

2. Last year, according to the specific production situation of the company, a comprehensive and practical Collection of Common Safety Knowledge including various safety systems and safety knowledge was compiled and distributed to every employee. This year, some new contents were added and distributed to the new employees in the past year. Learning was organized in various forms, which popularized safety knowledge and improved employees' awareness of self-protection. I also take advantage of daily inspection, duty and other opportunities to discuss with employees in depth, grasp the safety psychology of employees in time, and carry out safety education at any time in combination with the actual situation, which has received good educational results.

3. The accident warning education was carried out.

(1) Organize all employees to watch the safety warning education CD of Anti-Three Violations Accident. Using the form of case reappearance, through vivid reappearance of typical real cases of enterprises, the broad masses of cadres and workers realize that violation of regulations means going to an accident, approaching injury, or even ruining their lives. Make the broad masses of cadres and workers truly understand safety from the depths of their minds, attach importance to safety, and always think about safety.

(2) Organize all employees to carry out safety accident warning display board education. Combining with some accident cases that happened in the company in recent years, and collecting some typical cases of habitual violation of regulations from outside, I made a set of safety accident warning display boards in the form of combining pictures and texts, and also made some safety education wall charts. Various workshops and sections also participated in the production of some exhibition boards according to this model. Through colorful contents and vivid reappearance of real cases, the safety awareness and safety concept of employees have been enhanced, which has won unanimous praise from cadres and employees and improved their safety quality.

4. Conduct factory-level safety training and education for employees in key positions and new employees. I re-compiled a company-level safety training textbook, which mainly includes relevant laws and regulations; Basic knowledge of safety production and occupational health; Safety production rules and regulations and labor discipline of the unit; Risks in the workplace, preventive measures and emergency measures for accidents; Relevant accident cases, etc. Through the careful education of new employees, they have a preliminary understanding of the company's safety production situation, and obtained the necessary basic safety skills and self-protection knowledge before taking up their posts.

5. Strengthen supervision, timely education and follow-up inspection of foreign construction personnel, and often conduct targeted safety education in combination with the actual situation on the spot, which standardized many unsafe behaviors of them, such as illegal use of fire, electricity, climbing work, etc., and avoided some safety accidents.

chemical safety responsibility speech 2

In 2 years, under the correct leadership of the party and government team of the company, under the guidance of national, provincial and municipal laws, regulations and related documents on safety and environmental protection, and in accordance with the safety production policy of "safety first, prevention first, comprehensive management, environmental protection and benefit to the people" and "avoiding and eliminating accidents to the maximum extent" formulated by the company at the beginning of the year. Any casual violation of Chapter < P >, any irresponsible command, and any thoughtless recklessness may bring a painful price. Therefore, strengthening the investigation and management of potential safety hazards, correcting all kinds of violations and improving the safety awareness of employees in the whole factory are still the focus of our future safety management work.

because most of the products produced by our company are corrosive, the equipment is seriously aging, some monitoring methods are relatively backward, and the degree of intrinsic safety and automation is not high, which brings great hidden dangers to safety and the safety situation is particularly severe. Safety work is accomplished by all the staff * * *, and only when all the staff start it, everyone will automatically and consciously observe, manage, catch and check hidden dangers, and all kinds of responsibility systems and safety slogans can be implemented. Otherwise, only a few leaders and several departments can grasp and manage it, and it will never be done well. Therefore, we emphasize here that all the staff should start it in safety management, and everyone wants to be safe, everyone pays attention to safety and everyone manages safety. In order to let all employees firmly establish safety awareness from their hearts and realize the passive implementation of "I want to be safe" to the active response of "I want to be safe", the following is a summary of the work of the Safety and Environmental Protection Department in the past 2 years.

1. Safety management

1. The Safety and Environmental Protection Department revised the company's safety production responsibility system, rules and regulations, accident handling system, etc. in combination with the company's actual situation, which made the responsibilities and authorities of all departments and personnel of the company more clear, and was more practical and timely. At the same time, each branch factory is required to supplement and revise its own post safety operation procedures, so as to better meet the needs of the post.

2. In order to improve the safety management, the Safety and Environmental Protection Department has strengthened the software construction, and established files and accounts including safety inspection, hidden dangers rectification, safety education and training, safety meetings, safety organization, accidents and emergency response, special equipment, hazardous chemicals files, labor insurance supplies, environmental protection, etc., which has made the management of various documents, materials and files reach a new level, and improved the management level and work efficiency through this work.

3. Strengthen internal management and readjust the internal staff of the Safety and Environmental Protection Department. Because an old employee retired in the first half of the year, there is no suitable candidate to take over the fire control and safety education work he is in charge of, so the internal work needs to be readjusted. After the adjustment, the division of labor of all functional personnel is more clear, so that they have a clear division of labor and do their own duties. On Monday, the safety officers of each branch factory and functional department held a safety meeting to summarize the work of last week and arrange the safety work this week.

4. the safety and environmental protection department has strengthened the supervision and supervision of all kinds of tickets and operation activities, and punished and corrected habitual violations and unsafe behaviors developed for a long time in strict accordance with the relevant regulations on the management of tickets and operation activities, thus greatly reducing all kinds of violations. However, because the company has not been very standardized in hot work for many years, although all kinds of work tickets are complete now, the implementation is not very good and not all of them have been put in place. Especially for hot work analysis, although the company has a perfect system and formulated three-level hot work regulations, the hot work analysis is still decided by experience. For many years, the company has not analyzed whether it is a secondary fire or a special fire. The analysis department has neither analysis equipment nor how to analyze it. Even the hydrogen pipeline fire is judged only by a portable detector, and the safety risk is difficult to control.

5. Strengthen the management of hazardous chemicals production site. By carrying out safety standardization work, set warning signs, warning instructions and hazard notification in production sites that may cause occupational hazards, set safety warnings in production workshops, set height limit signs on the company's pipe gallery bridge, and set wind flags in obvious positions, so that all employees can improve their safety awareness and have a corresponding grasp and understanding of some prevention and emergency treatment knowledge and measures.

6. Strengthen the handling of all kinds of accidents and near misses, focus on the management of serious and extraordinarily serious near misses, treat near misses as accidents, focus on analyzing the causes of accidents, implement preventive measures, and strengthen the safety awareness of employees through accident handling. In case of production safety accidents, the company should seriously organize an accident analysis meeting, analyze the reasons, implement rectification measures, and investigate the responsibilities of relevant personnel, so as to further improve the safety consciousness of employees and urge them to take preventive measures.

2. Safety training

1. At 15: 3 on April 9, 2, the company invited Hu Hui, a safety expert of Syngenta China Investment Co., Ltd. in China, and others to give a vivid safety education to the middle-level leaders and safety management personnel of various departments of our company. By watching vivid accident cases, we had a more sensible understanding of the accident and greatly improved our safety awareness and prevention awareness.

2. The Safety and Environmental Protection Department organized safety management personnel at all levels to participate in municipal safety training in a planned way. This year, 11 people exchanged safety qualification certificates for managers through retraining, which greatly improved the overall safety management level of our company and met the requirements of all levels of departments for safety training of hazardous chemicals enterprises.

3. Special operators were trained in safe operation. In the first half of the year, more than 5 operators of special jobs were retrained, and the training was reviewed by relevant departments, and new certificates were replaced. In the second half of the year, nearly 6 operators in dangerous positions were newly trained, which greatly increased the rate of holding certificates for special operations personnel and greatly reduced the number of people without certificates.

3. Safety inspection and hidden dangers rectification

1. Led by the Safety and Environmental Protection Department, the functional departments are organized to conduct a safety inspection of the whole company at least once a month, and then the inspection results will be notified to the whole company in the form of inspection notification by the Safety Production Committee, and re-inspection will be organized according to the rectification time, and each branch factory and department will be specially assessed according to the rectification rate of hidden dangers.

2. In combination with the investigation and management of hidden dangers in production safety and the special action of one hundred days' supervision of production safety by Jiamusi Municipal Administration of Work Safety, 179 general hidden dangers were found in the whole company by December through comprehensive inspection, seasonal inspection, professional inspection and daily inspection, and the Safety and Environmental Protection Department implemented them one by one, and 172 rectification projects were completed, with a rectification rate of 96%. At present, there are 12 major safety hazards in the company that have been reported to Agrochemical Corporation, and 11 major safety hazards have not been rectified for the time being due to the company's capital relationship and production reasons.

3. during holidays, the safety and environmental protection department organized relevant personnel to conduct unscheduled safety inspections, made spot checks on various production posts, and found that the phenomenon of "three violations" was severely punished, which educated employees to overcome paralyzed thoughts and played a good role in consolidating the safety production of the whole company.

iv. investment in safety production

1. With the increasing attention paid by the provincial and municipal safety production supervision administrations to safety production, the frame structure of the liquid chlorine tank farm in the liquid chlorine section was listed as a major safety hazard rectification project by the provincial safety inspection supervision team at the beginning of last year, and it was required to complete the rectification before June 3, 2, and at the same time, 2.5 million yuan was given as a subsidy for the safety hazard rectification. At the beginning of this year, the company began to carry out rectification, renovated the liquid chlorine storage tank area of major hazard sources, changed indirect chlorine liquefaction into direct liquefaction, updated the liquid chlorine liquefaction process, and replaced ammonia refrigeration with Freon refrigeration, which reduced risks and ensured the safety of employees in accident situations.

2. Due to the company's lack of funds, there are still some hidden dangers that need to be rectified urgently. For example, the use area of sulfuric acid storage tank area in chlor-alkali branch is seriously insufficient, and there is no safe distance, which has great safety hazards; There are cracks in the cement beams of the platforms on the third and fourth floors of the synthetic workshop, and the wall skin falls off seriously, and the eaves on the northwest side are loose and blocks of cement often collapse; Most glass pipes and gaskets in chloroacetic acid workshop of pesticide branch are seriously aging;

the tower wall in the cooling tower of the power station is corroded seriously, and the ring beam at the top is corroded seriously, and some tower walls at the upper part have holes, and the lightning protection device with loose concrete at the top of the tower is disconnected in many places; The two electrostatic precipitators of power station boilers are seriously aging, and the dust exceeds the national standard by more than ten times; There is no special annular fire water pipeline in the factory area, which has been listed as a major fire hazard by the municipal fire department. These hidden dangers have not been rectified for a while, so we can only take some extraordinary measures to monitor and use them. I also hope that the company will solve them as soon as possible. I hope the company will solve it as soon as possible.

V. Various types of accident management

Although the overall safety management level of the company has been improved to some extent in 2 _ _ years, the employees' awareness of safety precautions is not very strong, the risk factors are underestimated, the analysis of harmful factors cannot or will not be carried out, the construction and maintenance operations are arbitrary, and violations occur from time to time. In addition, some protective facilities are not advanced and scientific, and the intrinsic safety of equipment needs to be improved. The incidence of all kinds of accidents in December of 2__ year showed a downward trend compared with that in 2__ year. In 2__ years, there were 7 industrial accidents, 1 fatal accident and 4 non-personal injuries and attempted accidents. In 2__ years, there were 9 personal injury accidents (one of which was a hit-and-run accident). Based on the principle of "four don't let go", the Safety and Environmental Protection Department carefully analyzed these 8 industrial accidents, found out the causes of the accidents and implemented the rectification measures. The person responsible for the accident and the responsible unit were severely punished. Really achieved "the cause of the accident has not been found out, the responsible personnel have not been dealt with, the rectification measures have not been implemented, and the relevant personnel have not been educated."

in the past 2 years, the safety and environmental protection department has done a lot of work according to the company's safety production guidelines and objectives, which has made some progress in safety management. However, there is still a big gap and deficiency compared with the work requirements of the state, provinces, cities and companies. Next year, on the basis of earnestly summing up the successful experience of this year's safety and environmental protection work, we will continue to clarify the safety idea of "people-oriented, prevention first" and continue to adhere to the safety production policy of "safety first, prevention first, comprehensive management, environmental protection and benefit for the people". Strengthen the education and training of safety production, increase the intensity of management and investment, and enhance the legal concept and self-awareness of workers' safety production.

chemical safety responsibility speech 3

safety first, prevention first. This is chemical industry.