Work summary of safety inspector

Model essay on work summary of safety inspectors (select 5 articles)

Time goes forward step by step on the annual ring, and a period of work has ended. Looking back on this extraordinary time, there are laughter, tears, growth and shortcomings. So make a summary. In order to make it easier and more convenient for you to write a work summary, the following is a model essay for security inspectors (5 selected articles) compiled by me. Welcome everyone to learn and refer, I hope it will help you.

Security inspector 1 Work summary If I use one word to describe my xx years, I think it should be-enrichment. Over the past year, words such as pipeline positioning, valve well, pressure regulating box and rectification have appeared in my works. Cooperate with colleagues in inspection department, engineering department, comprehensive coordination department and voltage regulation center to do their jobs every day; Although architecture has great mobility to people, I still know most of it. With the freezing of Yitong River, the year's work will come to an end. Now I will summarize my work in the past year as follows:

I. Work situation

1. pipeline positioning work: this year, * * * conducted pipeline positioning times to measure the remaining kilometers on foot; Externally, it has assisted PetroChina and Sinopec units in pipeline positioning for many times; Internally assist the engineering department, supervision office, gas office maintenance center and comprehensive coordination office to locate pipelines; We have made our own efforts for engineering construction, emergency maintenance and pipeline protection. This year, because the pipeline locator returned to the factory for maintenance for one and a half months, the pipeline locator was newly purchased by the inspection office, and I participated in the rectification. The number of pipeline locators decreased compared with the previous year, but each pipeline locator task was successfully completed.

2. Rectification of valve well and pressure regulating box: from mid-April this year to the end of 10, I participated in the rectification of potential safety hazards of valve well and pressure regulating box; * * * Rectification of pressure regulating box (installing guardrail, paving square brick, brushing guardrail, anti-corrosion of foot) and valve well. I am mainly responsible for the contact between the construction team and various departments, leading the construction team to inspect the construction site step by step, assisting the rectification team leader in the inspection during construction and acceptance after construction, and collecting and sorting out data. After 7 months of rectification, the expected rectification goal has been achieved.

3. Other work: I participated in a number of large-scale dangerous operations this year, and was responsible for on-site safety monitoring and gas detection using leak detectors during dangerous operations; Participated in rescue work for many times, such as the rescue and maintenance of Ф 325 pipeline in the super-large north area; And cooperate with other daily work of department leaders.

Second, harvest

The coming year is also my most rewarding year. Through continuous practice, I can be more skilled in using pipeline locator, leak detector and other instruments. Able to independently complete some tasks assigned by leaders. Through one year's pipeline positioning work, I am more familiar with the location of some pipelines; Through the rectification work, I am not only familiar with the geographical location of some users, but also familiar with the location of pressure regulating box and valve well, which has accumulated a valuable wealth for my future work.

A whole year has passed, and a brand-new year is coming. In the future work, I will work harder to learn from my leading colleagues around me, learn their experience and some new knowledge, and apply them to my daily work. I will work harder to add confidence to the beautiful blueprint of safe production!

Summary of safety inspector's work Over the past year, the words pipeline positioning, valve well, pressure regulating box and rectification have been appearing in my work. Cooperate with colleagues in inspection department, engineering department, comprehensive coordination department and voltage regulation center to do their jobs every day; Although architecture has great mobility to people, I still know most of it. With the freezing of Yitong River, one year's work will be over. Now my work for one year is summarized as follows:

I. Work situation

1. pipeline positioning work: this year, pipeline positioning was carried out, and the cumulative distance was measured on foot; Externally, it has assisted PetroChina and Sinopec units in pipeline positioning for many times; Internally assist the engineering department, supervision office, gas office maintenance center and comprehensive coordination office to locate pipelines; We have made our own efforts for engineering construction, emergency maintenance and pipeline protection. This year, because the pipeline locator returned to the factory for maintenance for one and a half months, the pipeline locator was newly purchased by the inspection office, and I participated in the rectification. The number of pipeline locators decreased compared with the previous year, but each pipeline location task was successfully completed.

2. Rectification of valve well and pressure regulating box: from mid-April this year to the end of 10, I participated in the rectification of potential safety hazards of valve well and pressure regulating box; * * * Rectification of pressure regulating box (installing guardrail, paving square brick, brushing guardrail and anti-corrosion of foot) and valve well. I am mainly responsible for the contact between the construction team and various departments, leading the construction team to inspect the construction site step by step, assisting the rectification team leader in the inspection during construction and acceptance after construction, and collecting and sorting out data. After 7 months of rectification, the expected rectification goal has been achieved.

3. Other work: I participated in a number of large-scale dangerous operations this year, and was responsible for on-site safety monitoring and gas detection using leak detectors during dangerous operations; Participated in rescue work for many times, such as the rescue and maintenance of Ф 325 pipeline in the super-large north area; And cooperate with other daily work of department leaders.

Second, harvest

The coming year is also my most rewarding year. Through continuous practice, I can be more skilled in using pipeline locator, leak detector and other instruments. Can finish some collars independently.

The task of guidance and explanation. Through one year's pipeline positioning work, I am more familiar with the location of some pipelines; Through the rectification work, I am not only familiar with the geographical location of some users, but also familiar with the location of pressure regulating box and valve well, which has accumulated a valuable wealth for my future work.

A whole year has passed, and a brand-new year is coming. In the future work, I will work harder to learn from my leading colleagues around me, learn their experience and some new knowledge, and apply them to my daily work. I will work harder to add confidence to the beautiful blueprint of safe production!

Summary of the work of safety inspectors 3 In order to implement the spirit of the xx document "Notice on Launching Special Actions for Safety Inspection", the last special inspection was reviewed.

At the time of the last inspection, there were several hidden dangers in production safety in our community, and we issued a rectification instruction for the hidden dangers in production safety. In order to completely eliminate potential safety hazards, the place where the rectification instruction for potential safety hazards is issued shall be rechecked. During the re-inspection, safety hazards were not rectified in several other places, among which the safety hazards of Shunxiang Auto Repair were serious, the number of fire extinguishers was out of date and insufficient, the installation and use of heating devices in painting room were not standardized, the distribution box lacked protective doors, the air compressor lacked protective covers and warning signs, and the safety hazards were not rectified during the re-inspection.

Gep dry cleaning in the United States did not add protective cover to the distribution box. The safety hazards of the liquefied gas room in Jiayi Miaomiao Hotel have not been rectified, but the ventilation holes have been increased and rectified. For the supermarkets and hotels inspected last time, the rectification is in good condition, all fire extinguishers are adjusted and all are equipped with emergency safety lights. Set up a public security team in the community to supervise and inspect the places with potential safety hazards from time to time to ensure the safety of residents' production and life and maintain the safety and harmony of the community.

Summary of the work of safety inspectors 4 In order to further strengthen the safety supervision of crowded places such as shopping malls, supermarkets, large-scale bathing and leisure centers, large-scale car repair, cleaning and large-scale entertainment places in the community area, and prevent the occurrence of vicious accidents in crowded places, according to the notice of a street safety production Committee, the safety production inspection was carried out in crowded places in the community. The inspection results are hereby notified as follows:

1. In accordance with the requirements of the Notice, community cadres in our community conducted a thorough investigation of crowded places in the jurisdiction to check whether there was a fire acceptance permit and whether the use nature of the main building, evacuation routes, safety exits, electrical lines and other public areas were changed without authorization.

Second, focus on the inspection of densely populated areas within the jurisdiction, pay attention to the source, conduct in-depth inspections, ensure that hidden dangers are not left dead ends, do not go through the motions, find possible safety hazards in time through investigation, and persist in putting an end to crowded stampedes and other incidents in densely populated places.

Third, through the inspection of crowded places within the jurisdiction, there are no potential safety hazards in crowded places within the jurisdiction, but we will continue to pay more attention to the safety of crowded places to prevent irreparable incidents.

Summary of Safety Inspector's Work 5 Since the construction of xx Expressway 16 in 20xx/October, the xx Expressway Construction Office has attached great importance to safety production, and can carry out its work in strict accordance with the spirit requirements of relevant safety documents issued by the office quality supervision station and the group company. So far, there has been no safety accident. The following is a summary of the safety work of xx Construction Office in the first half of 20xx and the arrangement of safety production in the second half:

I. Safety in production

1, safety production management system

Since the commencement order was issued on 20xx 16 10/6, our office immediately organized personnel to study and issue guidance documents, such as Measures for the Administration of Safety Production in xx Section of Expressway, Detailed Rules for the Administration of Safety Production Expenses in xx Section of Expressway, and forwarded them to the provincial government, quality inspection stations, Safety Protection and Safety Site. Implement the principle of "who is in charge of production", make sure that someone is in charge of production safety, arrest people at all levels, and put an end to illegal operations.

In accordance with the requirements of the relevant documents of the quality supervision station of our bureau, our bureau established the safety production committee and the safety production office, determined the safety management system with the director of the construction office as the head and the safety engineer as the head, determined the special person to pay attention to safety, carried out the safety production inspection regularly and irregularly, rectified in time when hidden dangers were found, and always kept the safety work under control.

In addition, our bureau organized xx expressway project safety management personnel to participate in safety training courses, strengthened safety education and on-site safety knowledge training for all personnel, improved the safety awareness of all personnel, and conducted safety technical disclosure according to the characteristics of various professions.

2, the development of production safety work

The Construction Office regularly and irregularly inspects the safety work of the whole line, and often presides over safety meetings to report the inspection situation, requiring all construction units to pay more attention to the ideological situation, focus on the implementation of problems, and establish the awareness of safety alarm bells. Details are as follows:

1, set up a production safety emergency leading group with the director of the construction office as the team leader, the director as the deputy team leader, and the senior resident and project manager as the team members. Unified leadership, coordination and command of xx expressway construction project construction safety production emergency work.

2, "safety site" construction standard assessment. Organize the Construction Office and the participants of xx Project to seriously study the contents of "Assessment Standard for Safety Site Construction of Key Highway and Waterway Projects in Anhui Province", master the key points of inspection for reaching the standard, and carry out the self-assessment of the assessment standard for safety site construction of the project as required.

3 to carry out a number of safety activities with the theme of "year of safety production" and "month of safety production". We will strengthen the work of safety production by organizing photo exhibitions of safety accidents, publicity and education days of "Safety Production Month", learning safety accident warning and education films, carrying out "I make suggestions for safety", selecting "safety star teams, safety star team leaders, safety star employees", "youth safety production demonstration posts" and "online safety knowledge competition" and other popular forms.

4. Organize emergency plan drills. The construction unit is required to carefully prepare the emergency plan drill plan according to the emergency plan drill plan, actively organize emergency rescue drills, summarize them in time, and take effective measures to further improve the emergency system and improve the emergency handling capacity.

5. Carry out safety inspection and rectification of potential safety hazards. The Construction Office requested the Municipal Safety Supervision Bureau to further implement the implementation of safety management rules and regulations through comprehensive and in-depth inspection, especially the potential safety hazards of special equipment such as temporary electricity consumption, construction machinery, sidewalk (border protection), pile digging, blasting operation, high slope construction and gantry crane.

6. By requiring the Director General's Office to prepare the three-stage safety risk analysis and prevention, the unit early warning method and the implementation plan of "one school, one meeting and one volunteer", the supervisory role of the supervisor is fully mobilized to ensure the formation of a long-term mechanism for safety work.

Second, the shortcomings and problems in the work of production safety

1, the temporary electricity consumption is not standardized, and it is impossible to achieve "one machine, one brake, one box leaking";

2. Warning signs and signs are insufficient and not set in time;

3. Limit devices are not installed at both ends of the gantry crane track;

4. The number of full-time security personnel is insufficient.

5, foundation pit excavation protection is not timely, serious damage.

6, the construction site is still not wearing a helmet phenomenon.

The above problems were notified to the construction unit in the form of safety rectification notice, and the rectification was in place.

Three, the second half of the production safety work plan

1, pay special attention to safety publicity, education and training, and enhance the safety awareness of all staff; It is required to hang safety production banners in office areas and construction sites to raise the awareness of safety production of cadres and workers and create a safety production atmosphere that is well known, concerned and valued by everyone;

2, pay special attention to the construction of long-term mechanism of safety production, and further improve the management level of safety production; First, establish a safety organization system, clarify the target responsibilities, further strengthen the establishment of safety production institutions, the staffing of safety production personnel and the construction of safety production management networks to ensure that safety production organizations are in place. Second, in accordance with the provisions of the "Safety Production Law", fully implement the project leader's first responsible person for safety production; According to the principles of "who is in charge and who is responsible" and "safety must be in charge of production", the project leader has a comprehensive system of "one post and two responsibilities"; Third, strictly control production safety accidents; Fourth, strengthen the long-term effectiveness of safety management mechanism and establish long-term early warning awareness of safety production;

3. Continue to strengthen the management of safety work, ensure that safety personnel and various safety management functions are in place, put safety at the same height as production, and thoroughly correct the phenomenon of emphasizing construction but not safety;

4. New employees who are required to participate in the construction must carry out "three-level education";

5, continue to pay special attention to the hidden dangers rectification and major security risks in time to eliminate or take effective preventive measures. At present, the main problems should be studied and solved;

6. Increase the frequency of regular and irregular safety inspections, pay special attention to the investigation of potential safety hazards, and focus on the rectification and implementation of potential safety hazards;

7, to further strengthen the unit early warning method and the study and education of "safe site";

8. Strengthen the education and inspection of flood control, lightning protection and gale safety, and put the responsibility on people and implement a 24-hour duty system.

In a word, we will continue to adhere to the safety production inspection and hidden danger investigation of the third bid section of xx line, so that all project participants can "sound the alarm and prevent delay" and always implement the policy of "safety first, prevention first" to nip all kinds of hidden dangers in the bud, put an end to all kinds of accidents and ensure the safe and harmonious development of engineering construction.

;