Ct200h brake light is not on.

If the owner finds that the brake light is not on when driving on the road, it is best to slow down. Find the nearest repair shop to replace the brake light bulb or detect the brake light switch and other components, so as to restore the vehicle to normal driving state and avoid certain safety hazards when driving on the road. As follows: 1. It is most likely that the brake light bulb is damaged, because the bulb is used frequently, and the owner can replace it with a new one. Or check whether there is poor contact and adjust the light bulb.

2. The owner can also check whether there is a problem with the brake light switch and connect the brake light switch through wires. If the light bulb is on, the switch is damaged, and the owner can replace the brake light switch.

3. Disconnecting the fuse will also cause the brake light not to light up. However, some cars do not have a separate brake light fuse, but are used together with other electrical equipment. You can check the electrical equipment that is not working in the vehicle, and then replace the fuse.

Cars generally have three stop lights, one at the left and right of the tail, and a high stop light on the rear windshield.

Some cars only have two brake lights, but this kind of car has no high brake lights.

Brake light is a very important lighting system, and it is also an easily damaged lighting system in automobiles.

After the driver steps on the brake pedal, the brake light will light up, which can remind the driver behind to keep the distance.

If the brake light is broken, it will not light up after stepping on the brake pedal, which is very easy to cause rear-end collision.

Most car brake lights are damaged because the light bulb is broken. If the light bulb of the brake light flashes, the rider should replace it in time.

During the annual inspection, it is necessary to check the lighting system. If the brake light or turn signal is broken, the annual inspection will fail.