How to install the air outlet of central air conditioning-what are the precautions?

1. How to install the air outlet of the central air conditioner?

1, it is best not to install a lamp slot at the air outlet of the central air conditioner, because the lamp slot is easy to block the cold air or hot air sent from the air outlet, which will affect the cooling and heating effect of the air conditioner.

2. When heating in winter, it is best to adjust the blades to 45 after the air outlet of the air conditioner is installed, so that hot air can be easily sent to all corners of the room, and it is not good to be too high or too low.

3. Generally, the central air-conditioning tuyere should be installed before painting the wall, because there is a gap between the air-conditioning tuyere and the wall, which can be made up by painting to achieve aesthetics and airtightness.

Second, the central air conditioning air outlet installation principle

Compared with the traditional split air conditioner, the central air conditioner has the advantages of soft and uniform air outlet, concealed installation, beautiful appearance and no space occupation, and is an ideal choice for many middle and high-end users. However, most users only consider the brand, quality and other issues when purchasing, while ignoring its coordination with the ceiling layout of the room.

If the design is not done well in the early stage, it will be found that the air outlet of the central air conditioner is not perfectly integrated with the overall indoor decoration, and it is difficult to achieve the ideal use effect. The choice should be based on the brand and the corresponding quality. Of course, the most important thing in the installation process of the air outlet of the central air conditioner is to coordinate with the ceiling style, so that people can use the air conditioner without affecting the beauty of the room.

Three, the installation of central air conditioning tuyere matters needing attention

1, central air-conditioning needs to determine the installation position and pipeline layout direction of indoor units in advance, and the positioning must be strictly in accordance with the construction drawing, because the deviation of indoor units will cause poor air-conditioning effect.

2. There are three ways to send air back to the central air conditioner: side return air, side return air and downward return air. Different air outlet modes, different sizes and different installation positions should be planned in advance.

3. Be sure to seal the air supply outlet and air return outlet of the indoor unit with special tinfoil dust-proof paper for air conditioning, and do a good job of dust prevention, otherwise dust will easily enter the indoor unit in the later construction process.

4. Install the air outlet of the central air conditioner before painting, so as not to scratch the wall. When painting, you can also fill the gap between the blinds and the wall, which is beautiful and beautiful.

5. It is best not to install lights at the air outlet of the central air conditioner, which will affect the heating speed.