20 19 danger signs in the speedometer of automatic fashion edition of Volkswagen lavida navigation edition

Volkswagen LaVida dashboard indicator light is shown below.

Engine system fault light: when the start switch is placed in the ON position, the warning light is lit; After starting the engine, the warning light goes out. When the vehicle is running, the warning light is on, indicating that the engine control system is out of order.

Low oil pressure warning light: When the start switch is placed in the ON position, the warning light will light up; After the engine is started, the warning light goes out; When the vehicle is running, it lights up, indicating that the engine control system is faulty.

Battery charging fault light: when the start switch is placed in the ON position, this indicator light is lit; After starting the engine, the indicator light goes out; If it is still on, it means that there is something wrong with the vehicle charging system.

Low fuel level warning light: When the fuel level in the fuel tank is too low, this warning light will light up. When the fuel tank is full of fuel, the warning light goes out.

Brake system failure: When the start switch is turned on or the engine is started, the warning light will light up for a few seconds and then go out. If the warning light continues to light up, it means that the brake fluid level is too low, and the braking system of the vehicle should be checked immediately.

TPMS abnormal tire pressure warning light: When the start switch is turned on, the warning light will light up for a few seconds and then go out. If the system fails and the warning light continues to light up, please contact Geely Automobile Service Station for maintenance as soon as possible.

Airbag fault light: When the switch is turned on, the warning light will light up for a few seconds and then go out. If the system fails, the warning light will be on continuously.

ABS fault light: When the ABS braking system has a fault, this warning light is lit.

Left and right turn indicator lights: When the vehicle turns left and right or changes lanes, turn down the handle of the light combination switch, turn on the left turn indicator light, turn up the handle of the light combination switch, and turn on the right turn indicator light.

Daytime driving indicator: When the vehicle starts, the indicator lights up. When the front combination light is turned on, the daytime running indicator light goes out automatically. When the current combination light only flashes a warning for a short time, it will not go out.

Warning light for driver's seatbelt not fastened: When the start switch is turned on, if the driver's seatbelt is not fastened, the warning light will continue to light. The warning light went out after the driver correctly fastened his seat belt.

Low beam lamp: When the lamp combination switch is turned on to the low beam, the low beam lamp is on. Press the lamp combination lever, and the high beam will light up.

Front and rear fog lamps: when the light combination is turned on to the front fog lamp, the front fog lamp indicator will be on, and when the rear fog lamp is turned on, the rear fog lamp indicator will be on.

Constant speed cruise indicator: When the constant speed cruise control is started, this indicator lights up.

ESC(esp) off indicator: when the ESC (esp) off button is pressed, the indicator is displayed on the instrument panel.

How to eliminate the LaVida speed limit prompt;

To clear the Volkswagen LaVida speed limit prompt, please press and hold the A key for a few seconds to try to clear the setting. If it cannot be cleared, please use the following methods. After lifting, the speed limit will not be displayed on the instrument.

Press button A to reset the alarm speed, and Anton button A is reset. Press the upper end of quick switch B to increase the alarm speed (press 5km each time), press and hold the upper end of switch B and keep the alarm speed continuously adjustable. At this time, set the alarm speed higher, so that there will be no alarm during normal driving. After setting, Anton button A confirms the alarm speed modification information.