What are the contents of Sinopec’s Seven Thoughts and Seven Quits on Safety?

Sinopec's seven thoughts and seven quits on production safety

"Think seven and seven quits" work requirements:

1. If you don't comply with the safety ban, you won't do it ;

2. Think about safety risks, but don’t do it if you don’t know;

3. Think about safety measures, but don’t do them if they are not perfect;

4. Think about a safe environment, If you are not qualified, you will not work;

5. If you want safety skills, you will not work if you don’t have them;

6. If you want safety supplies, you will not work if you don’t have them;

7 .If you want to confirm safety, you won’t do it until it is implemented.

1. If there is a safety ban, do not comply with it. "Safety prohibitions" are high-voltage lines and lifelines in direct operations. Employees of both owners and contractors must be familiar with and strictly abide by them during production operations and construction operations. We will never do anything that is explicitly prohibited by the "safety ban".

2. If you think about safety risks, don’t do it if you don’t know. Hazard identification and risk assessment are important means to control risks and ensure safety. Before working, all employees must identify the hazards of the work they are doing, analyze whether there will be hazards such as falls, slips, falls, objects, electric shocks, poisoning, etc. during the operation, and check whether the tools and equipment used may cause personal injury. Injuries etc. Do not start work without knowing the safety risks.

3. Think about safety measures, but don’t do them until they are perfect. Perfect safety measures are an important condition for ensuring operational safety. Before production operations or construction operations, employees must check and confirm the on-site safety measures one by one. If there are any omissions, they must be supplemented before work can begin.

4. If you want a safe environment, you will not work if you are not qualified. A safe working environment is the basic guarantee for achieving safety. On the one hand, we must create a safe working environment for workers, and resolutely put an end to illegal orders in order to compete for time, rush for progress, and ignore the safety risks in the working environment; on the other hand, employees must check, analyze and evaluate whether the working environment exists before starting work. In case of major hidden dangers, we refuse to give orders that violate regulations and take risks.

5. If you want safety skills, don’t do it if you don’t have them. Good safety skills are the basis for employees to safely and successfully perform their job responsibilities and complete their work tasks. When arranging work tasks, managers should assign work tasks to employees with relevant safety skills. At the same time, safety briefings must be carefully conducted to ensure that operators understand the work content and existing risks.

6. If you want safety supplies, don’t do it if you don’t have them all. Safety and labor protection products are the last line of defense to ensure the life and health of workers. Before starting work, it is necessary to strictly check whether the corresponding safety and labor protection supplies are complete according to relevant standards, whether they match the work tasks, whether there are defects, and whether employees are familiar with the use of safety and labor protection supplies, etc.

7. If you want to confirm safety, you will not do it until it is implemented. Safety confirmation is an important means to ensure that safety measures are in place. The focus of security confirmation is ticket management. Check and confirm strictly in accordance with the security measures required by the ticket and the preventive measures determined after risk assessment to ensure that all measures are implemented.