Standard sticking method of truck reflective label

The standard for attaching reflective stickers to trucks is as follows: 1. Sticking authentic reflective stickers, but not fake and shoddy products. Authentic reflective stickers have manufacturing trademarks, 3c certification marks, products and other information. If you don't have this information, it is a fake and shoddy product, so you must pay attention to buying reflective stickers.

2. The reflective sticker at the rear of the car body must start with a white unit and end with a white unit, and the intersection of the four corners of the car body must be a white unit. The reflective sticker on the side of the car body can start from the red unit, but the intersection position between the side of the car body and the rear of the car body must be the white unit.

3. Do not punch or slot the reflective label, and do not damage the reflective label.

4. Reflective stickers cannot affect the normal functions of vehicles, such as headlights and turn signals.

5. The reflective stickers on the side of the car body can be disconnected, but the reflective stickers should account for more than 50% of the length of the whole side of the car body.

6. The length of each reflective sticker shall not be less than 300mm, and each reflective sticker shall contain at least one red unit and one white unit.

7. The interval length of the reflective stickers on the sub-body should not be greater than150 mm..

8. The reflective sticker on the side of tricycle should be no less than the ground height1.2m. If it is difficult to post, a baffle should be installed for posting.