Good operation methods can bring refrigerators into a low-carbon era

Good operation methods can bring the refrigerator into the low-carbon era

Good operation methods can bring the refrigerator into the low-carbon era. Low-carbon life leads the future. However, for us, low-carbon Life starts with how to use the refrigerator correctly. The following is a sharing of good operating methods that can help refrigerators enter the low-carbon era. Good operating methods can bring the refrigerator into the low-carbon era 1

Choose an energy-saving refrigerator when buying a refrigerator

Perhaps, when we buy a refrigerator, most people look at the brand of the refrigerator , Nowadays, many brands of refrigerators carry the slogan of energy saving and emission reduction. Therefore, when we buy a refrigerator, we should do more comparisons, inquire more, and go online to check which brands of refrigerators consume less electricity. Buying a good refrigerator can be said to be the first step to save energy and reduce emissions.

Refrigerator temperature adjustment

Perhaps many of us don’t know that the setting values ??of the refrigerator are different in the four seasons of spring, summer, autumn and winter, and the setting can be set in any season. Achieve energy conservation and emission reduction. Allowing the refrigerator's set value to change with seasonal changes can effectively reduce power consumption and achieve power saving. The specific setting values ??are generally set according to the instructions of each manufacturer.

Clean the ice on the inner wall of the refrigerator in time

When the refrigerator is used for a long time, it is easy for a layer of ice to adhere to the inner wall of the refrigerator. This ice not only takes up the space of the refrigerator, but also causes the refrigerator to malfunction. The pressure increases, which in turn consumes electricity. Timely cleaning of ice in the refrigerator can effectively save energy and reduce emissions, thereby achieving a low-carbon life.

Avoid putting bulky food

Bulky food can easily increase the workload of the refrigerator. Cutting the food into small pieces and putting it in the refrigerator is more efficient than the whole food. Put it in the refrigerator to save energy, and cut the food into small pieces, which is also convenient for quick freezing and quick defrosting, takes up little space, is flexible and convenient to take, etc.

There is no need to put some food in the refrigerator

Many friends like to put all the vegetables, beer, milk, fruits and other food they bought in the refrigerator , stuffing the refrigerator full', in fact, this approach virtually increases the burden on the refrigerator. Some foods do not need to be put in the refrigerator at all. If you want to save energy, you must make reasonable use of the refrigerator space to achieve a truly low-carbon life.

Avoid opening the refrigerator door for a long time

Although this seems to be a basic common sense, sometimes it is because we are careless and do not close the refrigerator door tightly, causing the refrigerator to produce serious cold air. outflow, leaving the refrigerator in a state of continuously supplying air conditioning, causing unnecessary waste of power. Good operating methods can bring the refrigerator into the low-carbon era 2

How to adjust the temperature of the refrigerator

How to adjust the temperature of the refrigerator

Unless the temperature at your home is the same all year round It's spring, otherwise there's no need to change the temperature of your refrigerator. Otherwise, due to the large temperature difference between summer and winter, the temperature control knob of the refrigerator needs to be adjusted in summer and winter to save electricity and ensure the quality of food freezing.

Adjustment method: The temperature control knob is generally 0, 1, 2, 3, 4, 5, 6, 7. The higher the value, the lower the temperature inside the freezer. Generally, we put it in the third gear in spring and autumn. It depends on your requirements whether the freezer can reach below minus 18 degrees. In order to keep the food fresh and save electricity, we can turn on the 1st or 2nd gear in the summer and the 4th or 5th gear in the winter.

Correctly adjust the refrigerator temperature

Temperature adjustment in summer

During the use of the refrigerator, its working time and power consumption are greatly affected by the ambient temperature, so We need to choose different gears to use in different seasons. When the ambient temperature is high in summer, it should be used in the 2-3 weak gear.

Reason: The ambient temperature is high in summer, and the temperature inside the cabinet is difficult to drop every 1 degree. The loss of cold energy through the cabinet insulation layer and door seal will be accelerated, so the startup time will be long but the shutdown time will be long. Very short. This will cause the press to operate at high temperatures for a long time, thereby aggravating the wear of the piston and cylinder. The insulation performance of the motor coil enameled wire will also decrease due to excessive temperature, and the power consumption will increase sharply, which is uneconomical and unreasonable.

If you shift to the weak gear (2.3) at this time, you will find that the start-up time is significantly shortened and the downtime is extended, which not only saves electric energy, but also reduces the wear and tear of the compressor and extends the service life. Therefore, when the temperature is high in summer, the thermostat will be set to a weak setting.

Winter temperature adjustment

It is suitable for shifting to 4th gear or above in winter. The reason is that the product you purchased only has a refrigerator thermostat to control the refrigeration and freezing temperatures. Since the technical requirements for refrigeration temperature are controlled between 0-10 degrees, the refrigeration environment is generally low in winter and it is easy to reach the set temperature. If the set temperature is too high, it will easily cause the refrigerator to start up in a short time, causing the freezing and refrigeration effects to fail. In winter, if the ambient temperature is low, the main thing is to ensure the refrigeration effect. Under normal circumstances, if the ambient temperature is lower than 16 degrees, it can be adjusted to level 5, and if the ambient temperature is lower than 10 degrees, it can be adjusted to level 6 or 7. Sometimes because the ambient temperature is too low, such as 0~5 degrees, the food can be stored outside the refrigerator after the gear is lowered.

Low temperature compensation switch switch

The product system you purchased is a single-system refrigerator, with only one refrigerator thermostat to control the refrigeration and freezing temperatures. Since the technical requirements for refrigeration temperature are controlled between 0 and 10 degrees, when the ambient temperature is close to the storage room temperature, the refrigeration start-up time is very short, and the temperature will be reached even if it does not start. In order to avoid non-startup or short start-up time in winter, the production department specially designed a low-temperature compensation or switching device for single-system refrigerators to ensure normal operation even if the ambient temperature is low in winter. Therefore, when the ambient temperature is lower than 16 degrees, it is necessary to turn on the low temperature compensation or switch (see the manual for details). In addition, pay attention to the ambient temperature not falling below 10 degrees, and adjust the thermostat to a stronger position.

The optimal temperature of the refrigerator

The temperature control of the refrigerator should be adjusted according to the season.

Adjusting temperature control is actually adjusting the temperature difference coefficient.

Generally, the greater the temperature difference between the inside and outside of the box, the smaller the temperature control coefficient adjustment. On the contrary, the smaller the temperature difference between inside and outside the box, the greater the adjustment of the temperature control coefficient.

The most important thing is to adjust the gear according to the season and the condition of the refrigerator. 0The smaller the weather heat adjustment, the colder the weather, the larger the adjustment." Master this principle.

The temperature of the freezer should be lower than -18 degrees, and the temperature of the refrigerator should be between 1-10 degrees. The thermostat of the refrigerator is generally set in the refrigerator compartment. It can be adjusted to a low range between 1-3 in summer, to a mid-range in spring and autumn, and to a higher temperature in winter. At the same time, turn on the temperature compensation switch in winter, but don't forget to turn it off when the temperature gets warmer, otherwise it will consume a lot of electricity. When the room temperature is below 10 degrees Celsius; the thermostat should be set to the "6" position. 7 is the highest level. After adjustment, it is the quick freezing state of the refrigerator. It needs to be turned back after use, otherwise the refrigerator will not stop working.

If you want to save trouble, set the thermostat to the middle setting.

Remember: Setting the thermostat on low (first gear) is the best way to save power without affecting the preservation of food in your refrigerator.