What is the size of Guangzhou Automobile Chuanqi Shadow Leopard wiper? Tutorial on How to Replace Shadow Leopard Wipers

The size of the 2022 Shadow Leopard wiper is 25+ 17 inches, and a special interface is adopted. The wiper has no fixed replacement cycle, so it should be replaced if it is not cleaned.

Shadow Leopard Wiper Replacement Steps

1 Break the wiper to the front of the car, and it will be fixed when it swings to a certain position. Press the button of the rain wiper blade, hold the wiper blade at the same time, and shake it upward to take out the old rubber strip.

(Note: Don't throw the wiper arm backward, or it will easily break the glass. At the same time, you can put a towel on the glass to prevent the glass from being scratched. )

2 Untie the two fixing buckles and unplug the old rubber strip. Don't use too much force when loosening the middle connecting device and buttons on both sides, and the plastic covers on both ends can't be removed. )

3 When installing the prepared new adhesive tape, the two metal parts of the wiper can be staggered up and down and correctly installed in the first groove. The whole process is a bit cumbersome and requires patience. You should install one side first, and then the other side.

After the new tape is put back successfully, the wiper can be installed in the reverse order of the disassembly steps.

Note: Some models are complicated to replace, and many car owners have damaged the wiper. The owner can read the instructions before replacing it, and please go to the regular garage for installation if it is impossible to replace it by himself.