How to repair the wall brick falling off

If the wall brick falls off, it can be repaired according to the following steps:

1. Clean the removed tiles, remove the old adhesive, and ensure that the wall is clean, flat and dry.

2. Coating tile glue: according to the size and quantity of tiles, squeeze out a proper amount of tile glue and spread it on the wall with a shovel, paying attention to the smoothness and uniformity of the glue.

3. Fixing the tiles: Paste the new tiles on the glue, paying special attention to the levelness and verticality with the surrounding tiles to ensure that the new tiles are closely spliced with the surrounding tiles.

4. Knocking compaction: Knock the ceramic tile with a rubber hammer to make it firmly fixed on the wall. Then trim the whole wall with a balancer or scraper to ensure that the wall is flat, horizontal and vertical.

5. Waiting for drying: Tiles need to wait for a period of time to dry, and the length of time depends on the drying time of the adhesive used, generally it takes 24 to 48 hours.

6. Joint filling: fill cement jointing agent between tiles, and after it is dried, wipe it with a wet cloth to ensure that the gaps are completely filled.

These are the steps to repair the falling of wall tiles. It should be noted that if there is no professional technology and experience, it is best to ask professional workers to repair it, so as not to affect the appearance and use effect.