Secondly, the safety supervision work of power projects must adhere to the principle of "prevention first" to carry out safety supervision work, and safety supervision work must be carried out in acco

Secondly, the safety supervision work of power projects must adhere to the principle of "prevention first" to carry out safety supervision work, and safety supervision work must be carried out in accordance with national regulations. Its supervision department needs to ensure the comprehensiveness of safety supervision work, pay attention to the timeliness of safety supervision work, and prevent violations during the construction process. Once violations are discovered, they must be dealt with seriously and investigated in accordance with relevant legal provisions. Responsibility, implement safety supervision procedures and systems, and cannot make them a mere formality. 2. Strictly clarify the responsibilities of safety supervision. Safety supervision of power projects is mainly to ensure the safety of power project production. Therefore, when conducting safety supervision, the supervision department needs to clarify its own work functions and supervision responsibilities, thereby improving the staff's Safety awareness and implementation of safety supervision throughout the entire construction process of the project. The safety supervision work of power projects needs to be carried out from the source, and the responsibilities of the front line of project construction must be emphasized and clarified. Engineering technicians, managers, foremen, and project managers not only need to carry out safety management, but also need to clarify their own management responsibilities. That is to say, the management responsibilities of personnel at all levels of the project must be clarified in the safety supervision of power projects, and the safety management of project construction must be done well. The safety supervision department must carry out safety supervision work with a highly responsible attitude, conduct regular inspections of the construction site of the project, and keep supervision records during the supervision process, so as to promptly discover potential safety hazards and risks during the construction, and Solve it based on reality. In addition, the supervision unit must also conduct timely and effective communication with the construction unit of the project regarding the hidden dangers during construction, and carry out project production and construction on the basis of ensuring the safety of the project, so as to ensure the safety and smoothness of the project construction and improve the enterprise economic and social benefits, and avoid unnecessary safety accidents. 3. Strictly strengthen safety production education and training. The safety awareness of construction technicians and managers directly determines the effectiveness of safety supervision work. Therefore, when carrying out power engineering construction, relevant units must conduct safety production training for their staff. First of all, enterprises should expand the scope of safety production training and education, expand safety production awareness training to project leadership, temporary workers, seasonal workers, migrant workers, etc., improve the safety awareness of all personnel, and also expand the content of safety training and education Expand to engineering safety technology, safety measures and safety management knowledge, so that staff can have a more comprehensive understanding of safe production in the project. The second is to increase the number and frequency of safety training. Safety production education and training in power engineering can be divided into weekly training and monthly training. Safety production meetings are held every week to summarize and analyze safety measures and technologies in production, and actively discuss safety issues in production, thereby improving safety. Supervision level. Safety production meetings and heart-to-heart discussions are held every month, and safety production lectures are held regularly to improve the safety awareness of staff. Under special circumstances, it is necessary to conduct safety emergency meetings and do a good job in safety training and production of the project. Finally, strict qualification assessment must be carried out for technical personnel of special types of work in power engineering to ensure their technical level and comprehensive quality. The above measures are used to ensure the smooth progress of project safety supervision work. 5. Timely supervise rectification or report to relevant departments. During the construction stage, the supervision agency should conduct inspections and inspections of the safety production conditions at the construction site, and notify the construction unit in writing of any hidden safety hazards discovered and urge them to make rectifications. If the situation is serious, the supervision agency should promptly issue a project suspension order, require the construction unit to stop work for rectification, and report to the construction unit at the same time. After the potential safety hazards are eliminated, the supervision agency should check the rectification results and sign opinions on review or resumption of work. If the construction unit refuses to make rectifications or does not stop work for rectifications, the supervision agency shall promptly report to the construction authority where the project is located or the industry authority of the project. Inspections, rectifications, reviews, reports, etc. should be recorded in the supervision log and monthly supervision report. 6. Supervision units must attach great importance to self-construction (1) Supervision agencies must establish and improve safety production management systems to ensure the implementation of safety production supervision responsibilities.The main technical investigator of the unit is fully responsible for the safety production management work. The project chief supervisory engineer is responsible for the safety supervision of the project under supervision and clarifies his/her job responsibilities according to the supervision personnel. The safety supervision personnel, under the leadership of the director, are responsible for the safety supervision of the construction site. Conduct daily supervision of production safety work. (2) Supervision units should strengthen the education and training of supervisory personnel on production safety knowledge and learn the laws, regulations and standards related to production safety. And should be familiar with safe operating procedures. (3) The supervision unit must communicate and arrange the work and inspection contents of production safety in a timely manner, conduct routine inspections or irregular inspections at least once a month on the progress of safety supervision work, and require the project supervision department to promptly report any problems discovered during the inspection. Implement rectifications and organize review. The contents and results of inspections and rectifications must be recorded in writing. (4) The project director shall conduct a comprehensive safety inspection of the construction site organization every week, discover and raise problems, eliminate hidden dangers, and establish a safety management evaluation system. The supervision unit can only establish and improve the safety production management system, clarify the responsibilities of safety production supervision, and implement dynamic and full-process safety supervision on the construction site, so as to review what needs to be reviewed, check what needs to be inspected, report what needs to be reported, and record what needs to be recorded. Only by keeping records can we effectively carry out safety supervision at the construction site and do a good job in self-protection at the same time.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd