Responsibility book for construction safety production

Model essay on the responsibility book of construction safety production (5 general remarks)

In the real society, more and more places need to use the responsibility book, which is a system established by assessment, reward and punishment according to the prescribed work standards. How should we draft the responsibility book? The following is a model essay (5 general remarks) on the responsibility of construction safety production, which I have carefully compiled. Welcome to share.

Responsibility letter for construction safety production 1 This responsibility letter is formulated in order to conscientiously implement the policy of "safety first, prevention first and comprehensive treatment", further strengthen the supervision of safety production activities of construction units according to law, standardize the safety behavior of construction units, curb major construction safety production accidents and reduce the occurrence of general accidents:

A, safety responsibility and implementation:

1. The contractor and the construction owner must complete all construction procedures before the project starts;

2, the construction party must conscientiously implement the national and provincial safety guidelines, policies and regulations. Strictly implement the "three simultaneities" system of simultaneous design, simultaneous construction and simultaneous use of safety facilities in construction projects;

3, the construction party should be equipped with not less than 1 full-time safety production management personnel at the construction site;

4. Construction personnel should wear safety helmets during construction, and those who don't wear safety helmets are prohibited from entering the construction site;

5. The construction party shall not contract or subcontract twice;

6, the construction unit or individual needs to buy accident insurance for its construction personnel;

7. Warning signs shall be set at eye-catching positions on the construction site, equipped with necessary safety protection articles and fire-fighting facilities, and all equipment shall be qualified or within the warranty period. Safety equipment should be strictly implemented in the construction area to ensure the safety of construction personnel and passers-by;

8, special personnel certificate rate 100%, it is forbidden to work without a license;

9, tower crane should be checked before admission, tower and all kinds of limit insurance devices are complete and effective, tower crane installation must be firm, the operator should operate in strict accordance with the operating procedures;

10. Strictly implement the accident reporting and handling system. After the accident, report the details of the accident to the construction administrative department or the local government within two hours, and take effective measures to rescue personnel and property. The accident should be handled in accordance with the principle of "four pass", and legal responsibility should be investigated if the circumstances are serious.

Second, the important index control:

1, put an end to serious accidents and the number of work-related deaths is "zero";

2. The serious injury rate should be controlled within 0.03%;

3. The safety education rate is 100%, and the certified rate of special operators is100%;

4. Poisoning accidents and serious traffic accidents;

5, no fire, electric shock accident;

6. The rectification rate of major accident hazards reached 100%, the rectification rate of general accident hazards reached more than 95%, and the monitoring rate of major hazard sources reached100%;

Third, the accident treatment:

In case of production safety accident, the construction unit shall be responsible for handling it, take measures to prevent the accident from expanding, protect the scene of the accident, and report it truthfully and timely according to the procedures; Put an end to the phenomenon of concealment and late reporting. If the circumstances are serious, the superior safety supervision department will find out the cause of the accident and impose relevant penalties.

Supervision unit:

Responsible subject:

20xx March

Responsibility Letter for Construction Safety Production 2 In order to ensure the implementation of the responsibility system for safety production at different levels, strengthen the safety production management of the project department and subcontractors, ensure the life safety and occupational health of all construction personnel, and prevent the occurrence of safety accidents, the project department and subcontractors sign a responsibility letter for safety production of construction personnel with employees, which is as follows:

65438+

2. Always put safety in production first in the construction work, consciously abide by the requirements of this responsibility book and the safety technical disclosure, safety operation procedures and safety production management regulations of the project department, and obey the management of the project department managers and subcontractors.

3. Actively fulfill their rights and obligations in production safety, help each other and supervise each other, so as to achieve "no harm to themselves, no harm to others, no harm to others" and put an end to "illegal command, illegal operation and violation of labor discipline".

4. When entering the construction site, you must wear a safety helmet, fasten your hat belt, and wear work clothes and work shoes. Fasten your seat belt when working at high altitude (suspended), near the edge or in a hanging basket. It is forbidden to take risks, do homework after drinking or bring children into the construction site. It is forbidden to throw garbage tools into the air, take the hanging basket of the material elevator or climb the scaffolding up and down. It is forbidden to dismantle, alter, misappropriate or damage all safety facilities at will.

5, are not allowed to connect disorderly pull virtual plug floating line, skip the leakage circuit breaker wiring; Non-designated personnel are not allowed to operate construction machinery.

6, are not allowed to work in unprotected dangerous parts; Articles are not allowed to be stacked on stairs, main roads and protective frames.

7. Comply with the fire laws and regulations, no smoking in the work site, take fire prevention measures during hot work, no illegal electrical appliances, and fire-fighting equipment will not be damaged by misappropriation. Flammable garbage on site must be cleaned in time and transported to the designated place to prevent fire.

8. Obey the leadership, obey the rules and discipline, unite and cooperate, be self-disciplined, and have the right to stop others from directing, operating or refusing to direct illegally. Report to the leader in time when potential safety hazards are found, and have the right to evacuate the dangerous area in case of distress. Cooperate with the rescue in time when an industrial accident occurs, and immediately report to the team leader and the project department, and don't report it indiscriminately.

9. Be civilized and hygienic. Clean up the garbage in the working area of the processing zone on the same day, and keep the environment inside and outside the dormitory of the living area clean and tidy. Take good care of public property, do not throw, damage and waste building materials, water and electricity, and do not damage finished products; No defecation, littering, littering. No fighting, no trouble, no stealing. If there is any contradiction, you should report to the leader and try to solve it fairly.

10. If I violate the above regulations, I should correct it in time after criticism and education. If I disobey the management, refuse to correct, or cause adverse consequences, I will be punished according to the relevant provisions depending on the circumstances. If an accident is caused by violation of regulations, the responsibility will be borne by me.

The above 10 guarantees that it will be implemented seriously. This responsibility book must be signed by yourself, kept by yourself, taught by yourself, and consciously observed by yourself.

Person in charge: xxx

20xx year x month x day

The third responsibility for construction safety is to implement the relevant national laws and regulations on construction safety, such as the Construction Law, the Law on Work Safety, the Regulations on Work Safety in Construction Projects, and the Decision of the State Council on Further Strengthening Work Safety. With the policy of "safety first, prevention first and comprehensive treatment", the responsibility system is effectively implemented, and the management of safe production and civilized construction on the construction site is strengthened with more powerful measures and more pragmatic style. In order to achieve the company's safety production management objectives, the responsibility objectives are implemented layer by layer. Now, we have signed a 20xx annual target management responsibility letter for safe production with various project departments. The details are as follows:

I. Management objectives

1, put an end to general accidents and above production safety accidents. Put an end to major mechanical accidents, major fire accidents and acute poisoning accidents. The frequency of young people's work-related injuries should be controlled within 3‰, and the annual accident rate of serious work-related injuries and deaths is zero.

2, actively promote the project department to create provincial civilized demonstration site. In accordance with the Regulations on the Management of Civilized Construction Sites and the Standard for Safety Inspection of Building Construction (JGJ59-20xx), the standardized management of safety and quality of building construction and civilized construction will be promoted, and the compliance rate of civilized construction will reach 100%.

3, civilized construction management objectives

Its jurisdiction ensures the completion of 1 above provincial safety and civilization demonstration sites.

Second, the measures and requirements

1, the project department shall set up a safety management leading body in accordance with the provisions of the Measures for the Establishment of Safety Production Management Institutions and the Staffing of Full-time Safety Personnel in Construction Enterprises issued by the Ministry of Construction. If the total construction area of the project exceeds 1000 square meters, it must be equipped with 2 ~ 3 full-time safety officers, and if it exceeds 50,000 square meters, a safety management unit shall be set up.

2, the project intends to set up a leading group for production safety on the construction site, adhere to the ten-day inspection system. At the weekly meeting, safety production analysis and research must be carried out at the same time to solve the problems existing in safety production work on the construction site and arrange and implement various safety management work in time.

3, clear responsibilities, implement the post safety production responsibility system, clear the project manager is the first person responsible for the project safety production post responsibility system, and decompose the post safety production responsibility layer by layer, so that the responsibility is clear, the measures are effective and implemented to people.

4. Strictly implement enterprise safety management rules and regulations, and ensure the investment of safety and civilized construction measures in accordance with the Measures for the Administration of Safety and Civilized Construction Measures for Construction and Installation Projects of the Ministry of Construction. Increase investment in safety protection facilities and equipment, and strictly control unqualified safety protection articles and eliminated mechanical equipment entering the construction site.

5, improve the overall safety management quality of the project intends to, the project manager, full-time security officer must go through safety training examination, examination qualified before mount guard.

6. Carry out the activity of "caring for life and paying attention to safety" to create a civilized construction site, adhere to the principle of "people-oriented", improve the working conditions and living environment of workers, eliminate environmental pollution, and improve the safety culture concept and civilized behavior consciousness of all employees.

7. Conscientiously implement the mandatory provisions and standards for safety production in engineering construction, organize an on-site self-inspection every ten days, implement the measures of "three determinations and one implementation" for potential accidents, strengthen the accident control of scaffolding, formwork support, foundation pit enclosure, lifting machinery injury, falling from high altitude, and pay close attention to safety protection measures such as "three treasures and four mouths" and construction electricity. In the event of an accident, we must adhere to the "four don't let go". Seriously implement the safety accident reporting system.

8. Carry out in-depth safety compliance activities on the construction site and take effective measures to ensure the full implementation of safety standards. We should take effective preventive measures. According to the company's "Atlas of Safety Protection and Civilized Construction Implementation on Construction Site" and "Demonstration Atlas of Safety and Civilized Construction Standards in Fujian Province" standards.

9, vigorously do a good job in safety education and training, in order to improve the broad masses of workers' concept of safety in production, enhance self-protection ability, abide by various safety operation procedures, and strictly implement the system that special operations personnel must hold relevant certificates.

10, emergency rescue plan for production safety shall be formulated, and emergency plan drills for safety accidents shall be carried out regularly.

1 1. The company will regularly assess the implementation and implementation of safety production target management of each project management department, organize the assessment at the end of the year, and give a notice of praise to the project department that has completed the management target. Won the title of provincial civilized construction demonstration site, giving greater economic rewards. Informed criticism will be given to those who have not completed the project, and an economic penalty of 1 1,000 ~11,000 yuan will be given according to the relevant regulations of the company. For mismanagement, causing casualties, it will be handled in accordance with the provisions of Articles 62, 64 and 66 of the Regulations on the Administration of Construction Project Safety Production.

12, this responsibility book is the responsibility book of 20xx annual safety production target management, which serves as the basis for organizing year-end assessment.

This responsibility letter shall come into effect after being sealed by the company, signed by the enterprise legal person and signed by the project managers of various management departments.

Company seal:

Project department:

Signature:

Person in charge:

Date, year and month

Date, year and month

Construction safety production responsibilities 4 I. Working principles:

1. Adhere to the Safety Production Law, the Regulations on Safety Management of Electric Power Construction and the relevant management systems for safe and civilized construction of the Project Department, clarify the safety management responsibilities of all parties, and implement the principle of individual responsibility.

2. Give full play to the role of safety production guarantee system and supervision system, do a good job in safety training and education for all contractors, ensure that workers master the required production skills and safety knowledge, and cultivate a rigorous work style.

3. Work concept: through unremitting efforts, actively prevent all kinds of accidents (except irresistible natural disasters) and actively prevent all kinds of hidden dangers.

Second, the security objectives:

Personal death accident is zero; Personal injury accident is zero; Group injury accidents are zero; Major mechanical equipment accidents are zero; The fire accident is zero; Traffic accidents are zero; Collapse accident is zero; Occupational health injury accidents are zero; The accident rate of minor injuries is less than 1‰.

Three, the safety responsibility of punishment and reward requirements:

The safety leading group of the project department will inspect, assess and evaluate whether the responsible unit has achieved the goal of safety and civilization and implemented the departmental safety responsibility system according to the following standards, and put forward suggestions on rewards and punishments.

The security deposit is RMB 50,000.00 Yuan (deducted from the project payment for the second time).

When an accident occurs during the assessment period, the security deposit shall be assessed according to the following standards:

1. In case of personal death and traffic accident, 100% will be deducted.

2, personal injury accidents, 80%.

3, major equipment accidents (including major construction machinery accidents), 60%.

4. Major equipment accidents (including major construction machinery accidents) will be deducted by 40%.

5, major fire accidents, 60%.

6. In case of a major fire accident, 40% will be deducted.

7, a group injury accident, 30%.

8. Major traffic accidents, 40%.

9, general traffic accidents, 30%.

10, major collapse accident, 40%.

1 1, a large collapse accident, 30%.

12, if the minor injury rate is higher than 1‰, 30% will be deducted.

13. In case of concealment accident, 50% will be deducted if it is found, regardless of the severity.

14. If the safety objectives are achieved, the hidden dangers and accidents in this area or other units are found during the construction and actively handled, they will be reported to the safety committee for research and reward according to the evaluation results, and the amount will depend on the situation.

4. This responsibility letter is made in duplicate, one for each party, and it will take effect after being signed by both parties. This responsibility is valid from the date of signing to the end of the project.

China water conservancy and hydropower xxxxx Co., Ltd.

Manager of xxx Wind Farm Project Department:

Date, year and month

Team leader:

Date, year and month

Responsibility letter for safe production in construction 5 In order to improve the management level of safe production in construction enterprises, the policy of "safety first, prevention first and comprehensive management" is conscientiously implemented, and according to the requirements of the county party committee and county government for safe production, the safety management mechanism of the building system is further rationalized, safety management is strengthened, safety responsibilities are implemented, and all kinds of safety accidents are prevented and reduced from the source. According to the Law on Safety in Production, Regulations on Safety in Production in Construction Projects and Regulations on Safety in Production in Shandong Province, combined with the actual situation, the Housing and Urban-Rural Development Bureau and the construction enterprise signed the XX annual responsibility letter for safety in production, which clarified the following safety production responsibility objectives.

I. Responsibility objectives

(A), production safety control indicators

1. The construction enterprise will not have a fatal accident, a serious injury to more than three people or a direct economic loss of more than 30,000 yuan.

2. The timely rectification rate of all kinds of hidden dangers of accidents identified at all levels reached 100%.

3, construction enterprises in a municipal safe and civilized construction site reached more than 30%.

4, the construction site according to the "building construction safety inspection standard" check score of 70 points or more (including 70 points).

(2), the basic management of production safety

1, the construction enterprise establishes an enterprise legal person as the team leader, who is in charge of the construction safety leading group of the deputy team leader.

2, the construction enterprise as a legal person is the first person responsible for safety in production, must be fully responsible for the safety in production of the enterprise, implement the laws, regulations and rules on safety in production, establish and improve the safety production management organization, and be equipped with complete safety production management personnel according to regulations, and hold a special meeting on safety in production at least once every quarter to study and solve new trends and problems in safety production management and implement safety precautions. Meetings should be recorded.

3. Implement the target responsibility system for production safety, sign the responsibility book for construction safety target management with all levels and departments, and define the post responsibilities and corresponding responsible persons.

4. Improve the construction safety management rules and regulations and the emergency rescue plan for construction safety accidents, and clarify the positions and corresponding responsible persons in the department.

5. The enterprise shall conduct planned safety inspection on the construction site.

6. When a production safety accident occurs during the construction, the main person in charge of the construction enterprise should quickly rush to the scene, organize rescue (application), and report the accident to the Housing and Urban-Rural Development Bureau in time, assist the Housing and Urban-Rural Development Bureau and relevant departments to seriously investigate, do a good job in the aftermath in time, and shall not conceal, conceal or delay the report.

7, according to the provisions of the supervision of workers (migrant workers) wage payment, put an end to the petitions caused by the arrears of wages of workers (migrant workers).

8, actively organize the publicity, education and training of production safety, especially to strengthen the education and training of special operations personnel, newcomers or migrant workers.

Second, the production safety inspection and assessment

1. Quarterly inspection: Housing and Urban-Rural Development Bureau conducts quarterly inspection of construction projects of construction enterprises. Inspection results, as one of the basis for quarterly assessment and evaluation of enterprise safety production management.

2. Temporary inspection and random inspection: In the middle of quarterly safety inspection, the Housing and Urban-Rural Development Bureau will inspect the engineering projects constructed by enterprises from time to time, and the inspection results will be recorded in the assessment and evaluation of enterprise safety production management in this quarter, which is also one of the bases for quarterly assessment and evaluation.

3. Annual comprehensive evaluation: According to the results of safety inspection, temporary inspection and random inspection in four quarters, at the end of the year, the enterprise's annual safety production management level is comprehensively and scientifically evaluated, and the evaluation results are reported.

Third, reward and punishment measures

Housing and Urban-Rural Development Bureau shall commend and reward the person in charge of the enterprise who has fully completed the responsibility target; If the responsibility target is not completed, the advanced qualification of the enterprise and the person in charge shall be cancelled, informed criticism shall be given, and economic punishment shall be given according to the relevant provisions; Poor management, resulting in personal injury and production safety accidents, according to the relevant provisions, seriously investigate the relevant responsibilities of the responsible units and responsible persons.

Signature of the person in charge of Linyi County Housing and Urban-Rural Development Bureau:

Signature of the person in charge of the construction enterprise:

XX year month day

;