Automobile safety work summary

Automobile safety work summary essay (general 5 articles)

Time is passing and never stops. A period of work is over. Looking back on the work during this period, we are achieving results. At the same time, we also found the shortcomings and problems in our work, and compiled past achievements into a work summary. What are the characteristics of a good work summary? The following is a sample summary of automobile safety work that I compiled (5 general articles). You are welcome to learn from and refer to it. I hope it will be helpful to everyone.

Summary of automobile safety work 1

1. Training safety conditions in each training room

(1) Automobile engine training room

1. There are currently 8 engines in the automobile engine training room, including four benches and four for students' disassembly and assembly training. Each engine requires a certain amount of engine oil and the bench requires 22V voltage, so fire and electric safety equipment must be prepared. .

2. There is a Cruze 1.6L bench that needs to be used by students to participate in skills competitions, so students need to continue to disassemble and work, and there are certain safety risks in operating skills.

(2) Automobile chassis training room

1. The automobile chassis training workshop currently has 5 benches, several chassis disassembly and assembly parts, a small amount of brake fluid, and power steering. fluid, transmission lubricant, etc. There are certain safety risks.

2. The use of various equipment requires the use of 220V voltage to drive the motor to work, so students need to master certain fire and electricity safety knowledge.

(3) Automotive Electrical Training Room

1. The Automotive Electrical Training Room currently has 14 teaching boards and various electrical circuit display benches, including 480V voltage plugs. Four, and the rest are 220V power supply voltage. Students need to know electricity safety knowledge in class.

2. There are some equipment in the electrical training room that require a small amount of oil to lubricate the equipment to operate, so safety and fire prevention knowledge and equipment are essential.

(4) Vehicle training room

1. The vehicle training workshop needs to undertake part of the maintenance tasks of school vehicles, so there is a lot of engine oil for the vehicle training workshop , gasoline, lubricating oil and other flammable and explosive materials are stored.

2. Since the vehicle workshop is located in an underground garage, some equipment is a high-power electrical appliance, so high-voltage electricity precautions are required.

3. Since the lift in the vehicle training workshop uses hydraulic pressurization for lifting, hydraulic maintenance is required after a period of work. The lift has been used for nearly a month since last year. Year, no safety inspections and maintenance have been carried out so far.

4. Since no peripheral treatment has been carried out in the underground garage, the tire balancer, air drum and other equipment have been damaged to some extent and require emergency maintenance. In order to prevent students from being damaged during the teaching process, Improper use may cause teaching safety accidents.

2. Practical training results

(1) Improved students’ professional skills

During the practical training, students not only consolidated and deepened their theoretical understanding through practical teaching, The understanding and mastery of knowledge also greatly improves one's professional skills.

(2) School-enterprise cooperation has achieved new breakthroughs

In the past, school-enterprise cooperation was a one-time cooperation, and the cooperation would be interrupted due to various reasons. The most important reasons are that students are not adapted to the working hours and intensity of the company, have poor ability to withstand pressure, complain a lot, cannot endure hardships, have a high position for themselves, and the company cannot pay them. Students feel that their efforts are not rewarded, and they are not interested in the company. He said that after providing you with a learning environment, you can't create value now and there is no reason to pay you. This is a real contradiction. In the end, the contradiction intensified. The company thought that the students had affected the company's operations, and the students thought that the company Exploiting them results in dissatisfaction among enterprises, students and teachers. The matter of school-enterprise cooperation has fallen by the wayside, and there will be no opportunities for cooperation in the future.

(3) Teachers’ practical skills and professional knowledge have been greatly improved

In the process of practical training guidance this semester, the role of teachers has changed. They used to be teachers In terms of the student practice model, companies are now responsible for training, and teachers are responsible for the position of department heads. Teachers are responsible for checking students' completion of tasks and supervising students to complete tasks.

In the process of supervising and checking students' completion of tasks, teachers will find various problems. In addition to solving problems, teachers must also encourage students and mobilize their enthusiasm for work. When encountering problems during work, teachers themselves must also Teachers need to actively learn and master the knowledge and skills they do not understand. In this process, teachers have been greatly exercised and can clearly understand their own teaching shortcomings and lack of knowledge, and find the direction for their efforts.

3. Shortcomings in practical training safety

(1) There is no fire protection equipment, which poses a major safety hazard.

1. There are more or less oil products in each training room, especially the underground vehicle training workshop, which has larger and more property materials. Once a fire breaks out, the consequences will be disastrous. Therefore, Each training room is equipped with certain fire protection equipment to prevent emergencies and avoid certain safety accidents.

2. Each training room does not have warning signs, system tables, or safety operating specifications, so a certain amount of advertising signs on the walls can remind students to pay attention to safety and prevent problems before they occur. .

(2) The equipment in the vehicle training workshop has not been maintained, and there are major safety hazards.

1. The base of the car lift equipment has been used for one year and needs to be reinforced and deepened. The lift needs to purchase overhead rods to prevent falling accidents caused by lift failure. The hydraulic oil of the lift needs to be inspected and repaired regularly, and the hydraulic oil needs to be replaced and added when necessary.

2. Due to the construction of underground garages, car washing by drivers and other reasons, the air pump pipeline is blocked by sediment and needs to be cleaned and repaired by professionals.

3. The tire balancing machine needs to be damaged and needs to be repaired. Otherwise, there will be a teaching safety accident.

IV. Directions for future improvements

(1) Improvement of teachers’ practical teaching abilities

It is recommended that schools establish incentive policies and formulate training plans to push teachers out , for teachers who choose the practical teaching route, they will be sent to conduct more than half a year of training in corresponding companies in related majors to enhance teachers' practical skills. For example, appropriate subsidies should be given to personnel who conduct on-the-job training in enterprises; regular and fixed-job training plans for teachers should be set based on the development ideas of each college, etc. At the same time, we should strengthen the study of the purpose of higher vocational education, so that teachers can establish awareness of vocational education and realize the significance of vocational education.

Teachers must also have the initiative and motivation to provide their own practical teaching capabilities, and actively learn the knowledge and skills they lack. For e-commerce majors, the requirements for teachers are higher. In addition to their own In addition to business theoretical knowledge and computer application technology, you also need to have comprehensive application capabilities. Only when teachers' abilities are improved, can they teach theoretical knowledge well and demonstrate practical operations well, can we cultivate high-quality skilled talents who master professional skills.

(2) Reflect on the curriculum setting in the talent training plan

The preparation of the talent training plan must be based on the company’s market research, and the curriculum should be based on the job occupation. Skill development as a guide. After the professional training goals and professional positioning are clearly determined, the curriculum setting is very critical. Curriculum settings that do not meet the needs of talents will not only make students feel that they can’t learn anything, the theory is boring, and their practical ability is not strong, but also cannot demonstrate the talents of higher vocational students. Features. Before setting up future courses, we must invite experts in the enterprise industry and company executives to communicate and discuss and carry out research activities.

(3) Reflection on the teaching content of professional courses

The selection of teaching content for professional courses is a very important systematic project, which determines what kind of knowledge is imparted to students. It can form a reasonable knowledge structure so that students can enter the society and get employment in the future. The teaching content of professional courses includes professional parts and professional basic parts. In our school, the teaching content of professional courses must not only take care of the teaching of students' basic knowledge of the subject, but also take into account the teaching content of students' basic knowledge. The cultivation of some practical abilities of citizens must also take into account the cultivation of students' character and humanity and the rigorous training of professional skills, so that students can become people with good ideological and moral qualities, multi-faceted knowledge and perfect survival abilities. In short, the reform of curriculum teaching content must start with teachers and teaching materials.

(4) Increase the emphasis on social training and introduce social training many times to combine social training with the practical teaching of school teachers and theoretical teaching.

Relevant departments of the school increase the introduction of social training, and regularly invite social workers into the school to train students, so as to combine social training, practical teaching of school teachers with theoretical teaching, so that students can learn as much as possible of contact with social enterprises.

(5) Strengthen the management and supervision of practical training

The management and supervision links in practical training are weak. For students who do not complete tasks on time and with high quality, use the school’s Management and restraint by the system seems very pale. When students no longer care, how to motivate them is the next direction we need to think about. Automobile safety work summary 2

1. Strengthen safety and use safety as the starting point to promote orderly production.

Plan in advance and make preparations for Spring Festival travel. Strictly control the three levels, including Spring Festival travel driver qualification review, vehicle technical condition inspection, maintenance and repair, and normal operation of vehicle 3G and GPS equipment to ensure that drivers participating in Spring Festival travel are qualified, vehicles are in good technical condition, monitoring equipment is operating normally, and safety facilities are complete and effective .

Before the Spring Festival travel season, all bus drivers in the fleet will be inspected based on their professional qualifications, illegal driving, traffic accidents, service quality, safe operation, implementation of safe operating procedures, participation in education and training, psychological and physical health, etc. Drivers' driving qualifications will be reviewed, analyzed and cleared one by one. Drivers who do not meet the conditions will be disqualified from participating in the Spring Festival Transport to ensure the purity of the driving team. Comprehensive safety inspections and maintenance were conducted on each vehicle participating in the Spring Festival travel rush. The inspection content mainly includes: whether the steering, transmission, brake, and tires are qualified; whether the lights and wipers are intact; whether safety facilities such as anti-skid chains, triangles, fire extinguishers, fire hammers, shovels, emergency doors, and seat belts are complete and effective; whether the vehicle Check whether the appearance, appearance of the vehicle, and bedding are clean and hygienic. Any unqualified items will be rectified immediately. It ensures that the vehicles operating during the Spring Festival travel period are in good technical condition and that the safety facilities are complete and effective. During the Spring Festival travel period, both our team’s vehicles and the borrowed transport capacity strictly carried out safety inspections, effectively preventing hospital vehicles from running on the road. All vehicle monitoring equipment of our team was inspected, maintained and repaired to ensure the normal operation of the monitoring equipment.

Further strengthen the safety management of each link: strictly implement the "three no entry, six no exit" source safety management regulations and operation management procedures, and adhere to the GPS and 3G trip registration review system , conduct a thorough review of the driver's qualifications, physical condition, and vehicle technical condition before departure, and understand the road traffic conditions and weather information, etc. If all conditions for departure are met, the issued departure notice will be valid within the same day.

Strengthen real-time dynamic supervision of vehicles, severely crack down on illegal behaviors such as "three excesses", and promptly correct drivers' bad traffic habits and improper operating behaviors. Make full use of 3G and GPS platforms to strengthen vehicle dynamic supervision, strictly implement supervision procedures, and conscientiously implement the 24-hour duty system. Adhere to the 3G and GPS registration system and the punishment system for illegal behaviors; timely correct drivers' bad traffic habits; timely collect weather information and road condition change information, and send timely group short messages through 3G and GPS platforms to remind drivers to drive safely.

Inspectors go deep into rural lines to severely crack down on overloading, speeding, fatigue driving and failure to follow prescribed routes.

Drivers are advised to reduce their speed, wear anti-skid chains, stop driving and other safety precautions in bad weather conditions.

Use the 3G and GPRS platforms to check from time to time whether drivers rotate on time, whether there are overcrowding, whether the number of drivers is assigned as required, whether the cumulative driving hours per day exceeds eight hours, and whether drivers have bad habits while driving. Achieve timely discovery, timely correction, and timely treatment to nip potential safety hazards in the bud.

Further implement the "84220" project and the long-distance passenger transportation system of parking and resting or connecting transportation from 2 to 5 a.m., and reduce the driving speed at night by 20 to prevent drivers from driving fatigued.

2. Strengthen driver safety education and improve safety awareness and operating skills

Before the Spring Festival travel season, our team held a special meeting on Spring Festival travel safety and trained 106 drivers, with a high participation rate , the pass rate was 100; five Friday safety studies were held during the Spring Festival travel period; in the latter part of the Spring Festival travel season, another special training was conducted for drivers. Through safety training and education, the safety awareness and operating skills of safety managers and practitioners, especially drivers, have been further improved. Mainly strengthen training from the following aspects:

1. Strictly implement the "three inspections" system before leaving the vehicle, during driving, and after closing the vehicle, promptly discover hidden dangers, and make timely rectifications to prevent the operation of hospital vehicles on the road.

2. Strictly adhere to the "three determinations" principle and the signature system for handover. According to regulations, vehicles equipped with more than two drivers must strictly implement the "three fixed" principle (fixed driver, fixed driving section, fixed driving period) and shift signature system to ensure that the cumulative driving time of passenger drivers in 24 hours does not exceed 8 hours in principle. Continuous driving during the day (daytime) shall not exceed 4 hours, continuous driving at night shall not exceed 2 hours, and each stop and rest period shall not be less than 20 minutes. Prevent fatigue driving.

3. Strict safety management of long-distance passenger transport and tourist passenger transport. The driving speed of passenger vehicles at night shall not exceed 80% of the daytime speed limit, and it is strictly prohibited to drive at night on mountainous roads below level three that cannot meet safe traffic conditions.

4. Strictly implement the regulations of stopping operations from 2 to 5 am.

5. Obey traffic control and wear anti-skid equipment on icy and snowy roads.

6. Before entering the tunnel, you must slow down and turn on the lights in advance to prevent accidents caused by the "black hole effect" and "white hole effect".

7. Driving on bridges and mountainous roads with dark curves to prevent accidents caused by dark ice.

8. When encountering landslides, dangerous bridges, or flooded roads, you must stop and check. After confirming safety, get off the passengers and pass empty.

9. Be careful and drive carefully on steep slopes, dangerous roads, transitions, and bridges.

10. Maintain a safe speed and safe distance, and ensure appropriate emergency measures.

11. It is strictly prohibited to slide in neutral when going downhill.

12. Luggage, luggage and items must not hinder the driver’s operation and sight.

13. Safety propaganda should be carried out to passengers during parking, parking, water filling, refueling, gas filling, eating and other aspects, and corresponding protective measures should be taken.

14. Passengers are strictly prohibited from getting on or off the bus before it stops.

15. Strictly enforce the company’s safety reward and punishment system to ensure safe and civilized driving.

16. Illegal activities such as "three excesses" and "three violations" will be dealt with strictly in accordance with relevant regulations.

17. Carry out warning education on typical road traffic accidents. Summary of automobile safety work 3

Since the establishment of the safety community, the xxx town truck safety working group has strictly followed the deployment and requirements of the implementation plan for creating a safe community, solidly promoted the truck safety work in our town, and prevented and reduced the number of trucks The occurrence of safety accidents has ensured the safety of people's lives and property and achieved good results.

1. Strengthen organizational leadership

A leading group led by the x Safety Supervision Station and composed of the traffic police team xx, the police station, the traffic management station, the work transportation office and other departments was established to be specifically responsible for the transportation enterprises Carry out truck safety work and formulate and improve various rules and regulations.

All member units of the working group have taken the prevention and reduction of transport vehicle accidents and injuries as an important task and conscientiously implemented the first-in-command responsibility system. The working group holds a scheduling meeting every month to report work progress, conduct a summary and analysis of existing problems, and study solutions.

2. Carry out publicity and education

In-depth transportation enterprises will carry out publicity, education and training around a series of laws and regulations such as the "Road Traffic Safety Law" and "Shandong Province Road Traffic Safety Management Regulations" , effectively improve the road traffic safety awareness of company employees; post promotional slogans around the company and key roads to improve the safety awareness of drivers and masters; organize and carry out truck safety publicity activities, hang promotional banners, post more than 20 slogans, and distribute publicity There are more than 500 copies of materials, creating a strong publicity momentum.

3. Strengthen vehicle and personnel management

Each enterprise has established a vehicle management leading group and assigned a deputy general manager to be responsible for vehicle management; it has formulated rules and regulations to strictly manage affiliated vehicles. Establish files for all vehicles, and record in detail the various technical files, vehicle conditions, vehicle departure information, etc. All vehicles must be regularly inspected in accordance with company regulations, and the affiliation of those that cannot be inspected on time shall be terminated; all vehicles shall be regularly inspected before departure. , those who fail to meet the driving conditions will not be allowed to pass, to eliminate potential safety hazards.

Established a vehicle driver’s personal file, signed a traffic safety responsibility letter with the vehicle driver, and required the driver to conscientiously study and abide by road traffic rules and operating procedures, and be sure to drive safely, civilly, and get out of the vehicle. Ensure that the certificates are complete at all times, inspect, maintain and repair vehicles as required, and keep the vehicles in good condition. The vehicle management leading group regularly conducts safety and business knowledge tests on drivers to improve drivers' awareness of safe driving.

After half a year of work, the number of truck safety accidents has dropped significantly, effectively ensuring the safety of truck drivers and achieving tangible results. Automobile safety work summary 4

In 20xx, with the care and support of the group company, all station staff worked together as one and made unremitting efforts to overcome the adverse effects of severe weather. By June 16, this year In the first half of the year, we transported 10,000 passengers, including 10,000 bus passengers and 10,000 long-distance passengers. Although the overall passenger flow has declined compared with the same period last year, because the station team always puts safety work first, no safety accidents occurred at the station during the blizzard. Since the beginning of this year, the station has carried out the following work closely around the work goals set at the beginning of the year:

1. Leadership attention and organizational guarantees.

The station always regards safety work as an important task of the station. A safety leadership group has been established to hold regular safety meetings every month to promptly convey the spirit of the group company's safety committee, implement the relevant requirements of the group company, and do a good job in safety work to the letter. Pay attention to making stage summaries at ordinary times, identify problems, and make timely rectifications.

2. Highlights and holiday protection

During this year’s Spring Festival travel period, there were heavy snowfalls for several days. In order to ensure the safety of the station and prevent passengers from slipping, party members and cadres at the station took the initiative to work overtime to clear the snow. . At the same time, due to the suspension of many flights, passengers were stranded in the station. The station actively organized station staff to explain the situation and guide passengers in a timely manner. This year is the first year that the country has adjusted statutory holidays. The May Day holiday has been adjusted from the original 7 days to 3 days. Although it is impossible to predict accurate passenger flow based on previous years’ experience, the station still insists on carrying out various tasks in accordance with the provisions of the "Festival Work Regulations" and implementing The holiday transportation emergency plan involves the participation of the station manager, deputy station manager, shift leader, dispatcher, station office and other positions. The division of labor is clear and the responsibilities are assigned to each person.

Mainly focus on several aspects: First, organize overtime and evacuate passengers. During the festival, the passenger flow at the station doubled, and the large influx of passengers put great pressure on the normal passenger transportation work of the station. Through multiple contacts, the station organized transportation capacity, arranged station staff to work overtime, and increased service windows to meet the needs of passengers during the festival. The second is to conduct security checks.

In order to alleviate the work pressure of station security during the holidays, the station tried to cooperate with Jingang Property for the first time during the May Day holiday, hiring security guards during the festival and strengthening the station's dangerous goods inspection work. The third is to ensure good review. In order to prevent overloading at the source, during the Spring Festival travel season, reviewers boarded every bus for review.

3. Safety inspection and hardware guarantee

The station insists on inspecting the performance of fire extinguishers in the station once a month to ensure their effectiveness. Supervise Shanghai Yaobo Company to perform regular maintenance of risk detectors in accordance with the agreement to ensure that the security inspection work is carried out normally.

In June, the station cooperated with a technology company to install monitoring equipment at the ticket office, ticket replacement office, ticket hall and other locations, which not only strengthened management but also helped safety.

IV. Careful organization and activity guarantee

First, during the "Safety Production Month" and the traffic "Anti-Three Violations Month" activities this year, the station established a The activity leadership team assigns responsibilities to each person to ensure that the activity is carried out in a solid and effective manner. The station also specially held a meeting for all station staff to convey the spirit of the group company's documents. It also conducted safety education for employees by hanging banners, posting posters, electronic displays, publicity boards, etc. to create a strong atmosphere of the event and make this safety month activity deeply rooted in the hearts of the people. .

The second is to carry out educational activities. In the first half of this year, in order to strengthen the safety responsibility of station staff, the station signed a "Safety Responsibility Letter" with each station staff. At each meeting, safety work is emphasized to cultivate the awareness of safety first among station staff.

5. Existing problems

Through hard work, the station has accumulated certain experience in safety management work and achieved some results, but there are also shortcomings, mainly reflected in the following aspects: Mainly Some safety facilities are outdated and need to be replaced.

In the work of the second half of the year, the station is determined to rely closely on the group company, carry forward its advantages, improve shortcomings, strive for safety and accident-free, and complete the safety indicators issued by the group company. Automobile safety work summary 5

1. Improve and improve the organization and put organizational measures in place.

In order to strengthen the safety work of the site and ensure the implementation of the safety production work of each team at the site, the safety production work network is adjusted in a timely manner based on the actual situation of the site, thus forming a bottom-up safety network organization , Create a safe production atmosphere. The site includes safety work in the year-end team evaluation, strengthens the daily safety inspection system, and strengthens the toll collector's "one post, two jobs" responsibility, so that the safety work responsibilities are clear, the responsibility is assigned to the person, and safety is emphasized in everything, everywhere, and at all times. . On the premise of paying attention to the safety of toll facilities and equipment, we pay more attention to personal safety, especially after the opening of the ETC lane at the site this year. Due to the high speed of vehicles in the ETC lane, the site stipulates that the on-off and off-duty queue monitors must emphasize the safety of the on-off lanes and field personnel. Ensured own safety.

2. Strengthen safety production management and promote safe toll operations.

To focus on safety is to focus on operations. In order to achieve the goal of zero responsible safety accidents throughout the year, the site always regards safety as its lifeline. First of all, on the basis of signing the "Responsibility Letter for Safety Production and Comprehensive Management" with each team, safety responsibilities are broken down layer by layer, personnel in safety positions are appropriately adjusted, safety management goals are formulated, and safety publicity and education are intensified. Secondly, cultivate employees' safety prevention capabilities. During the National Safety Production Month in June, we will carefully formulate a safety production month activity plan, including a theoretical test and a safety training. Starting from employees' ideological awareness, we should strengthen their awareness of safety concerns and prevention awareness; make sure that everyone is a safety officer, cultivate employees' awareness of safety concerns, and mobilize all employees in the station to "pay attention to safety and prevent accidents." It is required that safety work must be discussed at every meeting, every problem must be grasped, the alarm bell must be sounded, and the safety work must be unremitting. Thirdly, focus on system construction, strengthen the improvement and supplement of safety systems, operating regulations and emergency plans, and establish a long-term safety management mechanism. Third, safety responsibilities should be implemented, who is in charge and who is responsible should be implemented at all levels and the responsibilities should be clear.

Each team and team has clearly defined safety responsibilities at all levels, and must implement the "one post, two jobs" responsibilities of front-line employees; fourth, increase safety assessment efforts, strengthen awareness of responsibility, and respond to ineffective management and inadequate supervision. Parties who fail to detect and correct safety hazards in a timely manner and who operate in violation of regulations will be held accountable; fifthly, various safety training activities are organized from time to time, including testing, video, photo publicity, fire drills, holding "safety special issues", and Through various forms such as "all employees looking for safety shortcomings", we do everything possible to strengthen employees' safety awareness and self-protection capabilities. Through effective management, we strive to achieve no major safety accidents throughout the year and ensure the safety of the site.

3. Actively carry out various forms of safety publicity and education activities

Since this year, our station has actively looked for carriers of safety education activities and organized employees to study safety production knowledge books. Various forms of safety publicity and education activities include education and testing, fire-fighting drills, posting safety wall charts, entrance safety reminders to fasten seat belts, etc. At the beginning of the year, a Spring Festival travel safety work plan was formulated, and the work was actively arranged and implemented to complete the Spring Festival travel work. In April, the World Expo security work plan was formulated, various inspections were intensified, and the safety work during the World Expo was successfully completed. In view of the safety production in June During the monthly event, safety banners were hung at Hangzhou South Railway Station and Yuanfu Railway Station, and safety bulletin boards were put up to promote safety knowledge to drivers and passengers. Actively perform safety service work at the window, effectively publicizing the importance of safety, making everyone aware of the Safety Production Month activities, stimulating the enthusiasm of employees to consciously participate in activities, and creating an active atmosphere for safety production activities. At the end of the year, the site carried out fire drills and anti-theft and robbery drills, thereby improving employees' awareness of self-protection and safety and civilization. In response to the characteristics of thunderstorms, wind protection, and lightning protection work in the second half of the year, while increasing inspections and prevention, we formulated a flood prevention emergency plan, clarified the relevant safety precautions for lanes, toll areas, and station buildings, creating a strong safety civilization. Operating atmosphere.

4. Carry out self-examination and troubleshooting carefully, find hidden dangers, and implement rectifications.

In this year, our station adheres to weekly safety supervision and inspection records, safety hazard inspections and fire-fighting equipment inspections twice a month. During the inspection, we pay attention to the "three combinations", that is, firstly, the inspection The second is to combine inspection with implementation; the third is to combine inspection with strengthening the basic work of safe production. This year, our station held 12 regular safety meetings and 4 safety education and training sessions. We implemented the work requirements of superiors as planned, analyzed and deployed the station's safety production work, carried out 54 safety supervision inspections, 27 safety hazard inspections, and 27 fire-fighting equipment inspections. The team insists on safety inspections and night inspections for each shift, safety management is standardized, the organization is sound, education is frequent, and the safety work system of the company and management office is implemented well.

Through the efforts of all employees, we have successfully completed the target management responsibilities in safety production this year and achieved no safety accidents throughout the year. However, safety work never ends, and safety must be firmly established. , the ideology of unremitting efforts and always sounding the alarm, continue to carry forward the work style of strictness, diligence, meticulousness and practicality, and at the same time prepare to summarize the safety production work in the next step and promote the development of safety work.

Safety knowledge, awareness and concepts. Safety production is related to the safety of employees' lives and property, and is related to social stability. Only when all employees understand safety knowledge and improve their understanding of the importance of safety in production can we focus on safety production and insist on safety first, so that employees and managers can Only by firmly establishing safety awareness and being truly vigilant can the truly safe operation of toll stations be guaranteed. ;