National highway safety production, environmental protection and civilized construction measures?

What are the measures for production safety, environmental protection and civilized construction on national highways? Below, Zhongda Consulting will give you a detailed introduction for your reference.

Establish a safety production responsibility system for all types of personnel at all levels, clarify the safety responsibilities of personnel at all levels, pay attention to implementation, pay attention to the implementation of responsibilities, regularly check the implementation of safety responsibilities and provide timely feedback.

(1) Safety production This section adopts the method of half-wide two-way traffic and half-wide closed, which diverts some vehicles through adjacent roads. At the same time, these roads are properly maintained and repaired to ensure normal driving of vehicles. Implement 24-hour duty, have dedicated personnel to command and maintain traffic order, and set up warning lights and neon lights at night to ensure traffic safety. 1. Implement the production safety responsibility system and implement responsibility management (1) Establish and improve the production safety leading group headed by the project manager, and carry out safety management activities in an organized and leadership manner. (2) Establish a safety production responsibility system for all types of personnel at all levels, clarify the safety responsibilities of personnel at all levels, implement the system and responsibilities, regularly inspect the implementation of safety responsibilities and provide timely feedback. (3) All management and operating personnel are not required to sign a safety agreement with the construction project and make safety guarantees to the construction project. 2. Carry out safety education and enhance personnel's awareness of production safety. Improve safety production experience, effectively prevent unsafe behaviors and reduce human errors. 3. Strengthen operation standardization management and achieve the unification of safety technology and production technology. 4. Special safety controls should be set up in key locations, such as complex machinery operating positions, intersections in transportation, and construction sites where humans and machines are mixed. Special safety management rules should be formulated and dedicated personnel should be responsible. 5. Construction diversion plan (1) Set up a slow traffic ahead sign 30 meters away from the starting point and end point of the route, and set up speed limit, no overtaking, and no driving signs on both sides of the route, 50 meters apart. www.fdcew .com sets up two construction signs 400 meters apart. Set up protective fences in the construction section, with reflective films on the outside, with a spacing of 1 every 10 meters, and pennants with ropes in the middle. Construction workers are working on one side, and construction workers are strictly prohibited from walking across the road railings. And set up night warning lights. (2) Establish a full-time safety officer (3) Insist on frequent and regular safety inspections to discover potential accident hazards in a timely manner and plug accident loopholes. 6. Formulate the following safety systems (1) Under the guidance of road administration department personnel, set up a full-time safety department with dedicated personnel for patrol inspections. (2) Workers entering the construction site must wear reflective uniforms. (3) Warning reflective signs must be set up at the construction site. (4) Before starting work, you must check whether the equipment and machines are running smoothly and completely. It is strictly forbidden to work while sick. It is strictly forbidden to pile up materials and equipment on the road. (5) It is strictly prohibited to drink alcohol before entering the construction site, and it is strictly prohibited to fight at the construction site. (6) It is strictly forbidden to stand under the boom when loading and unloading materials, and it is strictly forbidden to park under high-voltage lines. (7) It is strictly forbidden to install cables indiscriminately, and it is strictly forbidden to use dangerous electrical appliances such as electric stoves. The power bus must be equipped with leakage protection devices.

(2) Environmental protection measures 1. Establish an environmental protection team to formulate environmental protection projects and adopt environmental protection measures. The project department and construction team shall be managed at different levels and be responsible for inspecting and supervising the implementation of various environmental protection work. 2. During construction, soil must be taken and discarded strictly in accordance with the design requirements to protect vegetation. After the construction is completed, the land should be restored as soon as possible to return the land to the people and restore its original appearance. 3. Control dust: Sprinkle water on construction access roads regularly to reduce dust. Fine materials or bulk materials that easily cause dust should be covered or properly sprinkled with water. They should be covered with canvas, covers and similar items during transportation. 4. Noise: Near residential areas, unless approved by the supervision engineer, no noisy mechanical construction will be arranged at night. If construction occurs, the construction machinery and construction operations will be controlled.

(3) Civilized construction (1) Set up eye-catching signs and slogans at the construction site, sign up for construction, and issue briefings and blackboards to promote safe production and civilized construction. (2) Unify the layout and command to ensure smooth roads, clean environment, and civilized and sanitary conditions. Install a fence outside the construction site. (3) The comprehensive department will take the lead in organizing labor competitions to enable employees to establish a good atmosphere of love and dedication and enhance their sense of ownership. (4) Create an employee home and carry out various cultural and recreational activities to enrich the spiritual life of employees. (5) Actively cooperate with local governments and owners in joint public security prevention work, carry out industrial and civil society construction activities, and achieve "two civilizations at the same time, both hands must be strong". (6) On-site management ensures that the site is cleared after work is completed, materials are stacked and equipment is parked in an orderly manner, and power lines and electrical components are arranged and installed.

(7) Prefab houses are built in all living and production areas of employees to provide better living and accommodation conditions for employees.

For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd