What matters should be paid attention to in aerial work lifting platform?

1 Operators of aerial work platforms must hold relevant certificates, and it is forbidden to work after drinking.

2, aerial work platform lift car operators must be in good health, no disease and bad mood that hinder the operation.

3. Operators of aerial work platforms must be familiar with the performance and structure of aerial work platforms operated by forklifts.

4. Pay attention to the surrounding environment before operation: inflammable and explosive articles shall not be carried within 5 meters; The working range should keep a safe distance from the wires.

5, it is forbidden to use operating bucket, vertical bracket to pull cables and other items that have nothing to do with the elevator.

6. It is forbidden to load goods in the operation bucket, and there must be no two people in the operation bucket.

Second, the driver's responsibilities

1. Drive the aerial work platform safely, obey the traffic rules and don't drink and drive.

2, the driver must be in good health, no disease and bad mood that hinder driving.

3. Drivers should pay attention to traffic signs and the surrounding environment of the operating point, and don't risk driving on load-limited bridges and roads with unknown road conditions.

4. Before the driver operates, check whether the components, devices and safety warning signs of the lifting aerial work platform are complete and effective.

5. Place the supporting feet after the vehicle is in place: it is required that all supporting feet are opened and the support is in place reliably.

Third, the safety operation requirements

1. Before starting, conduct a comprehensive inspection of the aerial work platform, including: grounding wire and grounding wire. It is required that the grounding is not loose, the cable is intact, there is no leakage of components, and the safety devices and electrical instruments are sensitive and effective.

2, aerial work platform appearance inspection, standard section connecting bolts shall not be loose and missing.

3, mechanical operation without sound, no oil leakage.

4. There are no obstacles within the travel range of safety machinery, and the lifting limit must be safe and reliable.

5, safety brake must be within the validity period, expired to replace in time.

6. The operator must wear safety helmet, gloves and rubber shoes as required, and fasten your seat belt before the bucket operation.

7, it is forbidden to play in the process of operation, it is forbidden to throw anything down.

Four, the controller operation requirements

1, the controller handle should be at zero position before operation. After connecting the power supply, check whether the voltage is normal, whether the parts are leaking electricity, and the working conditions of the electrical instruments.

2, empty crane test run, test limit device and transmission device. Make sure there are no errors and exceptions before continuing.

3. During the repeated use of the aerial work platform, it is not allowed to change the running state up and down at will.

4. During the operation of the aerial work platform, the operator shall not leave the operating post, observe whether there is any abnormality in the elevator, and respond in time if any abnormality is found.

5. Check and handle the aerial work platform, and it is forbidden to run if the fault is not ruled out.

6. Report to the person in charge and the safety officer in time if the aerial work platform is abnormal.

7. After the aerial work platform stops working, lower the work bucket to the bottom, set all switch boards to zero, cut off the power supply, and leave the work bucket after turning off the switch.

Five, operating bucket ride requirements

1, safety bucket passengers of aerial work platform must obey the instructions of operators.

2, it is forbidden to have high blood pressure, heart disease, dizziness, fear and other personnel to ride the operating bucket.

3. When taking the operation bucket, you must press the principle of first down and then up, and the access shall not be crowded.

4, aerial work platform in the process of operation failure, shall not panic, shall not jump out of the operating bucket under unknown circumstances, shall cooperate with the operator to troubleshoot, make the elevator out of danger.

Six, street lamp replacement, installation and operation requirements

1. Operators must wear safety equipment as required, and gloves and rubber shoes must be in place.

2, it is forbidden to live work, street lamp power cord must be cut off before replacement, to prevent electricity accidents.

3. Personnel working high above the operating bucket must wear safety belts as required, and fasten them as required.

This paper refers to the aerial work platform.