Household reverse osmosis pure water machine installation knowledge

Now people pay more and more attention to safety and health, especially those related to our daily life. Drinking water is something we drink every day, so the safety of drinking water has attracted much attention. Many people buy reverse osmosis pure water machine, which can filter out bacteria, viruses and scale in tap water and make it safer to drink. However, many people bought it, but they are not very clear about the installation, so it is easy to make installation mistakes. Let's introduce the installation of home reverse osmosis pure water machine.

First of all, we need to know the main parts of reverse osmosis pure water machine, and then we can install each part. Let's take a look at the installation steps of home reverse osmosis pure water machine.

Installation of Household reverse osmosis pure water machine Accessories

We all know that the machine can't have only one part, so we need to make sure all the accessories are ready before installation, and check whether the pipes, faucets and so on are complete. After checking all these accessories, we will unpack and assemble them for later use. If the faucet we need is special, we need to drill holes during installation, which depends on what kind of faucet we have.

Installation of Home reverse osmosis pure water machine Host

When we install the main engine, we need to insert the reverse osmosis membrane into the reverse osmosis membrane tube until we feel the end, and then we tighten the cover at the end of the tube. After this step is completed, we need to take out the PE tube of the membrane tube and put it into the container. Then we turn on the power supply after passing water, fill the first three channels with water, and then see the black water flowing out. We can turn off the power supply after knowing that the black water is flowing out, and then install the removed PE pipe.

The domestic reverse osmosis pure water machine is connected with the water inlet tee.

After the main engine is installed, we need to connect the water inlet tee. First, we need to turn off the main switch of water, then wrap several layers of raw plastic on the thread of the spherical valve, and then connect it to the side hole and the PE pipe at the outlet.

The domestic reverse osmosis pure water machine connects the water inlet, the water outlet and the sewage outlet.

We first need to measure the length of all the PE pipes that need to be cut, and then connect the PE pipes to the water inlet of the water purifier. The back is connected with a PE pipe, and the activated carbon is the water outlet. PE pipe can be connected to the sewage outlet to discharge sewage, usually once a month, each time for ten minutes.

After all the above are installed, we can carry out the test. Turn on the switch and rinse with water first. We will see some black water flowing out, this is the first filtered water, and there will be a small amount of toner. This is normal. We can use it in a day or two.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~