How to write the content of the return visit culvert after the rectification of the gas station

How to write the content of the return visit culvert after the rectification of the gas station?

Self-inspection report of gas station

Safety self-inspection report of gas station: (1) Safety self-inspection of fire safety management standard of gas station.

1 range

Gas station fire safety management, fire safety responsibilities and responsibilities, fire safety system and operating procedures, station equipment management, explosion-proof fire management, fire inspection and hidden dangers rectification, publicity and education training and fire emergency evacuation drills, fire files.

This standard is applicable to commercial automobile gas stations. Other gas stations can also refer to the implementation.

2 normative reference documents

GBJ 16-87 code for fire protection design of buildings

GB50058-92 Code for Design of Electrical Installations in Explosive and Fire Dangerous Environments

GB50 156-2002 Code for Design and Construction of Automobile Filling Stations

3 Safety self-inspection terms and definitions

The following terms and definitions apply to this standard.

3. 1

An automobile gas station at a gas station.

A place that specializes in refueling gasoline and diesel fuel tanks of motor vehicles.

Note: Gas stations belong to key units of fire safety.

3.2

Underground oil storage tank

For a horizontal oil storage tank buried underground by directly covering soil in the tank or filling sand (fine soil), the highest liquid level in the tank is 0.2m lower than the lowest ground elevation within 4m outside the tank.

4 safety self-inspection fire safety responsibilities and obligations

4. 1 General provisions on safety self-inspection

The gas station shall be designed and constructed according to GB50 156-2002, and put into use after being examined and accepted by the public security fire department.

Gas stations should implement the fire safety responsibility system step by step and post by post, and clarify the fire safety responsibility.

The gas station shall report to the local public security fire department for the record, establish a contact system with the local public security fire department, and timely reflect the fire safety management of the unit.

4.2 Safety Self-inspection Fire Safety Responsible Person

The stationmaster or company manager of the gas station is the person in charge of fire safety of the gas station, who is fully responsible for the fire safety work of the unit and performs the following duties:

A) Organize the establishment of a regular meeting system for fire safety, and hold a fire safety work meeting at least once a month;

B) Organize fire prevention inspection and attend at least once a month;

C) Organize the rectification of fire hazards and be responsible for raising funds for rectification;

D) Organize the establishment of fire control organizations, and organize fire control publicity and education, fire fighting and emergency evacuation drills at least once every six months;

E) Implement laws and regulations to ensure that the fire safety of gas stations meets the requirements.

The person in charge of fire safety may designate a fire safety administrator to assist in the work, and the fire safety administrator shall report the fire safety work to the person in charge of fire safety at least once a month.

The person in charge of fire safety and the manager of fire safety shall report to the local public security fire department for the record.

4.3 Fire safety management personnel

Each gas station should have full-time and part-time security officers. The safety officer shall perform the following duties:

A) Check the implementation of fire control safety system and operation procedures by personnel in each post;

B) Conduct fire prevention inspection and record the inspection;

C) Deal with fire hazards in time and report to the fire safety manager or the person in charge of fire safety.

4.4 Other personnel

Other personnel shall strictly implement the fire safety system and operating rules, participate in fire safety education and training, master the methods of fighting the first fire, and report to the police in time when a fire is found. The oiler shall also be responsible for the fire safety at the refueling site, and shall not allow irrelevant personnel such as vehicle drivers to carry out refueling operations. The measurer should also prevent the phenomenon of running, running, dripping and leaking, and supervise the oil unloading.

5 fire safety system and operation procedures

5. 1 Fire safety system and its key points

5. 1. 1 fire safety meeting system

It should include the meeting convening, personnel composition, meeting frequency, topic scope, decisions, meeting minutes and other key points.

5. 1.2 fire safety education and training system

It should include the responsible department, responsible person and responsibility, frequency, training target (including special types of work and new employees), training requirements, training content, assessment methods, situation records and other key points.

5. 1.3 Safety self-inspection fire duty system

It should include the scope and responsibilities, emergency handling procedures, reporting procedures, work handover, the number of people on duty and requirements, and records of the situation.

5. 1.4 fire inspection and fire hazard rectification system

It should include the responsible department, responsible person and responsibilities, inspection frequency, participants, inspection location and content, fire hazard identification, disposal and reporting procedures, rectification responsibilities and nursing measures, and situation records.

5. 1.5 lightning protection, antistatic and electrical equipment 5. 1.6, line inspection and management system

It should include the responsible department, responsible person and responsibility, facility registration, qualification of inspectors, inspection location, content, inspection tools, handling procedures for problems found, and situation records.

5. 1.7 fire control and electricity safety management system

It should include the responsible department, responsible person and responsibilities, key parts and facilities, electrician qualification, hot work approval procedures, testing and management requirements, handling procedures for problems found and situation records.

5. 1.8 fire equipment maintenance management system

Should include the responsible department, responsible person and responsibility, equipment registration, storage and maintenance management requirements, situation records and other key points.